////////////////////////////////////////////////////////////////////// // // GoldED * Configuration File, Advanced Edition // // This configuration file demonstrates just about all configuration // keywords available in GoldED. // // A number of keywords are location dependent and must be placed in // a particular order to ensure correct operation. The exact list of // location dependent keywords can be found in a chapter in the // manual. This example configuration file shows the location // dependent keywords in the recommended places. // // WARNING! YOU MUST EDIT THIS FILE FOR YOUR SETUP BEFORE USING IT! // // PLEASE NOTE: It is NOT advisable to use this configuration file // with older versions! There are many new keywords and certain bugs // in older versions may surface if this configuration file is used. // // Modified for Golded+ but works as well with Golded 3.0.1 // comments to: Richard Menedetter@2:310/31 or ricsi@gmx.at ////////////////////////////////////////////////////////////////////// ---------------------------------------------------------------------- -- Golded+ related Keywords IF PLUS // SHOWDELETED (No) // Show soft deleted Msgs ins JAM Areas ?? SHOWDELETED No // ADDRESSLOOKUPFIRST (Origin) // By default address of sender taken from Origin line. If this // keyword set to MsgID then GoldEd looks for correct FTN address in // MSGID kludge first. // ENCODEEMAILHEADERS (yes) // By default headers in e-mails MIME-encoded according to RFC. // IGNORECHARSET (no) // If set to yes then GoldEd ignores CHRS kludges in messages thus // you will be able to switch codepage in messages with inappropriate // charset. // GEDHANDSHAKE (yes) // If enabled GoldEd displays a small 2 in the statusline if the message // was written with Golded. // FORMFEEDSEPARATOR (no) // Used when saving messages to file. If enabled, it inserts a Form // Feed (12d) character after each message. // USETZUTC (no) // Activates usage of TZUTC kludge in your messages. USETZUTC Yes // TASKTITLE (@longpid) // Sets window title in Win32 and OS/2 versions, ignored in other. TASKTITLE // USEPID (no if GoldEd mentioned in tearline, yes otherwise) // If disabled then @PID kludge will not be used in your messages. // USECHARSET (yes) // If set to no then GoldEd will not generate @CHRS and @CHARSET kludges. // TITLESTATUS (yes) // If enabled then brief status will be added to title. // RCVDISABLESCFM (yes) // If this keyword defined to "no" then GoldEd will recognize RRq // (receipt request) and/or CFM (confirmation) flag on messages with // RCV (received) flag set. // QUOTECTRL // Specifies if you want quote tearline and/or origin in your messages. QUOTECTRL No // CROSSPOST (ask) // Configure query appearence before crosspossting // BEEPFACTOR 1000 // Duration of beeps // AREAFORWARDDIRECT BADMAIL // as areacopydirect for forwarding // AreaCFMReplyTo // Send CFM messages to particular area // GERMANKEYBOARD (autodetect) // This option is meanful for w32 version only. Due to right Alt key // required to enter some native characters in german version of // Windows it could be defined to yes for this. // LOADLANGUAGE ELSE TIMEZONEOFFSET +0200 GOLDHELP goldhelp.old GOLDKEYS goldkeys.old GOLDLANG goldlang.old ENDIF ---------------------------------------------------------------------- -- NAME AND ADDRESSES (for internet addresses, see a later section) // Your name and aliases and (misspellings). USERNAME First Last NICKNAME Firstie // Your FTN-style address and akas. ADDRESS 1:23/45.0 AKA 1:23/45.67@fidonet.org // Setup special aka matching for OtherNets that span several zones. // A default aka matching like // AKAMATCH 27:* 27:1345/118 // is automatically done by GoldED. ;AKAMATCH 25:* 27:1345/118 // Where to enable or disable aka matching. AKAMATCHNET YES ; Enable aka matching in netmail. ;AKAMATCHECHO NO ; No aka matching in echomail. ;AKAMATCHLOCAL NO ; No aka matching in local areas. ---------------------------------------------------------------------- -- NODELISTS AND USERLISTS // The path to your nodelists. // NOTE: This keyword MUST be in GOLDED.CFG!!! NODEPATH C:\FIDO\FD\NODELIST\ // Filenames of your nodelists. // If extention is ".*" or ".999", the newest is used automatically. // NOTE: This keyword MUST be in GOLDED.CFG!!! NODELIST NODELIST.999 NODELIST FDPOINT.PVT ;NODELIST FDNET.PVT ;NODELIST 117LIST.999 117 ;NODELIST DBRIDGE.PVT 2:236/77 // Filenames of your userlists (FIDOUSER.LST format). // NOTE: This keyword MUST be in GOLDED.CFG!!! USERLIST GOLDED.LST ;USERLIST FIDOUSER.LST ;USERLIST DK-POINT.NAM // Uncomment this to use FrontDoor nodelist indexes. NODEPATHFD C:\FIDO\FD\NODELIST\ // Uncomment this to use InterMail nodelist indexes. ;NODEPATHIM R:\NODELIST\ // Uncomment this to use Version 7 nodelist indexes. NODEPATHV7 C:\FIDO\FD\NODELIST\ // Uncomment this to use a raw FIDOUSER.LST file. ;FIDOUSERLIST R:\NODELIST\FIDOUSER.LST // Define nodes to be excluded from the GoldED nodelist index. // This can be used to save disk space or nodelist compile time. // NOTE: This keyword MUST be in GOLDED.CFG!!! ;EXCLUDENODES 4:*/*.* ;EXCLUDENODES 5:*/*.* ;EXCLUDENODES 6:*/*.* // Define nodes to be included, even if excluded before. // NOTE: This keyword MUST be in GOLDED.CFG!!! ;INCLUDENODES 4:4/*.0 ;INCLUDENODES 5:5/*.0 ;INCLUDENODES 6:6/*.0 // NODELISTWARN (yes) // If set to YES, GoldED will warn you during startup if one or more // nodelists are missing. // NODEV7FLAGS // The Version 7 nodelist index does not by default define any nodelist // flags except the CM flag. // The field can be a number or a bit number. Allowed numbers // are: 32, 64, 128, 256, 512, 1024, 2048, 8192 and 16384. // Allowed bit numbers are: b5, b6, b7, b8, b9, b10, b11, b13 and b14. ;NODEV7FLAGS MN b7 ; no compression // NODEV7MODEM // The Version 7 nodelist index does not by default define any // nodelist modem type flags. // The field can be a number or a bit number. Allowed numbers // are: 1, 2, 4, 8, 16, 32, 64 and 128. // Allowed bit numbers are: b0, b1, b2, b3, b4, b5, b6 and b7. ;NODEV7MODEM HST b1 ;NODEV7MODEM V34T b2 ;NODEV7MODEM ZYX b6 // Where to allow nodelist lookup when entering messages. LOOKUPNET YES LOOKUPECHO NO LOOKUPLOCAL NO ---------------------------------------------------------------------- -- ADDRESS MACROS // Shorthand names for easy addressing. ;ADDRESSMACRO odin,Odinn Sorensen,2:236/77,Hi there! :-) // Additional address macros can be placed in an external file. // Supports the format used by FrontDoor, Maximus etc. NAMESFILE C:\FIDO\GOLDED\NAMES.GED ---------------------------------------------------------------------- -- MESSAGE READER (HEADER) // Display the size of the current message in the bottom left side. ;DISPMSGSIZE BYTES ;DISPMSGSIZE KBYTES DISPMSGSIZE LINES ;DISPMSGSIZE NO // Display the size of attached file(s) below the subject line. ;DISPATTACHSIZE BYTES DISPATTACHSIZE KBYTES ;DISPATTACHSIZE NO // FILELISTPAGEBAR (yes) // Enables or disables a pagebar (scrollbar) in the file attach list // Display the board number in []'s in the top left side. DISPAREANO YES ; Only shows it if available. ;DISPAREANO ALWAYS ; Will show 0 if there is no board number. // Positions and lengths of name/node/date fields in header display. // These are the default values. ;DISPHDRNAMESET 8 36 ;DISPHDRNODESET 44 16 DISPHDRDATESET -19 19 // GoldED can display either the real message numbers or automatically // calculated relative numbers. Can be toggled with Alt-Y. ;DISPREALMSGNO YES // Highlight the FROM name in msgs with the LOC attribute set? // Also highlights in the msglist. DISPLOCALHIGH Yes ---------------------------------------------------------------------- -- MESSAGE READER (MESSAGES) // GoldED jumps to the first message after the lastread when entering // an area. You can disable that behaviour here. DISPAUTONEXT NO // Margin for displayed messages. ;DISPMARGIN 0 ; Margin set to screen width (default). ;DISPMARGIN -1 ; Margin set to screen width minus one. ;DISPMARGIN 70 ; Margin fixed at column 70. // Enable a "pagebar" (scrollbar) for messages. The pagebar shows what // part and how much of the message that is being shown. It looks like // a mousable scrollbar, but unfortunately there is currently no mouse // support in GoldED. DISPPAGEBAR Yes // The number of spaces to display when a tab character is found or // when the Tab key is pressed in the internal editor. DISPTABSIZE 4 // Display hidden lines (kludges not on the "known" list). VIEWHIDDEN NO // Display known kludges. This includes those defined with KLUDGE. VIEWKLUDGE NO // How to display quotes in messages. VIEWQUOTE YES ; Show all quotes. ;VIEWQUOTE NO ; Show only the first line of each paragraph. // Treat the soft-cr (ASCII 141) as any other character. // The soft-cr is a special case in FidoNet and is often stripped. ;DISPSOFTCR YES ---------------------------------------------------------------------- -- MESSAGE READER (MISCELLANEOUS) // Name of a FIDOUSER.LST-style file where the names of participants // of a conference can be placed, using the Ctrl-L function. USERLISTFILE GOLDED.LST // Path where GoldED can create files decoded from uuencoded messages. UUDECODEPATH c:\ // Automatically add users when replying to their mails to the // addressbook ADDRESSBOOKADD NO ; No, never automatically add an user ;ADDRESSBOOKADD YES ; Add only if it's a netmail ;ADDRESSBOOKADD ALWAYS ; Yes, add them always. // Default output file for the Alt-W command. ;OUTPUTFILE GOLDED.OUT // File aliases. Shorthand names for filenames you write often. ;FILEALIAS DKB R:\DKBBS\DKBBS ;FILEALIAS DKP R:\DKPOINT\POINTS ;FILEALIAS VOTE R:\VOTES\VOTE.LST // LOOKUPUSERBASE (no) // If enabled, GoldED will attempt to find a matching username in the // user database if a to-name with wildcards is entered in echo or local ---------------------------------------------------------------------- -- CONFIRMATION RECEIPTS // Message attributes to set on confirmation receipt messages. ATTRIBSCFM PVT RRC K/S // Confirmation receipt template. CONFIRMFILE GOLDED.CFM // Define how GoldED should respond when you read a message with the // confirmation request attribute set. ;CONFIRMRESPONSE ASK ; Pop up a menu for your choice. CONFIRMRESPONSE YES ; Generate receipt automatically. ;CONFIRMRESPONSE NO ; Never generate a receipt. ---------------------------------------------------------------------- -- FILE REQUESTING (see also INBOUND AND OUTBOUND) // Message attributes to set automatically on file request messages. ATTRIBSFRQ PVT K/S // Known file extensions FRQEXT .ARJ FRQEXT .ARC FRQEXT .LZH FRQEXT .ZIP FRQEXT .RAR FRQEXT .ACE ;FRQEXT .* // Map certain nodenumbers in announcements to another. Useful if you // always want to request at the ISDN line, regardless of the origin // aka of the announcement. // change-to: from: ;FRQNODEMAP 2:236/99 2:236/100 ;FRQNODEMAP 2:2468/9909 2:2468/9909.9 // Options for the file request function. See the manual for details. ;FRQOPTIONS FAST ; Bypass the header edit. ;FRQOPTIONS NOFILES ; Don't list the file "FILES". FRQOPTIONS FAST, SORT, NOFILES ; Get all files in the msg. Sort the list. // Enable this if you want GoldED to use WaZOO-style file requests. ;FRQWAZOO YES // Bypass the area selection list when file requesting. AREAFREQDIRECT YES // Set the destination area for file requests. // Defaults to the first netmail area if not specified. AREAFREQTO NETMAIL ---------------------------------------------------------------------- -- INBOUND AND OUTBOUND // Path to FILES.BBS for descriptions of requested files. INBOUNDPATH c:\fido\fd\inbound // Default path for attached files without a path. ATTACHPATH C:\FIDO\FD\INBOUND // Binkley-style outbound path. Currently only used for WaZOO .REQ // file requests. This should be the name of your primary outbound // without extension. ;OUTBOUNDPATH R:\BINKLEY\OUTBOUND ---------------------------------------------------------------------- -- COPY/MOVE/REPLIES // Set the default area for replies/forwards to other areas. // If not specified, the first netmail area is used. AREAREPLYTO E-MAIL // Enable this to bypass the area selection list, for a "seamless" // reply or forward to another area. This keyword should not be used // globally. Use it in a Random System group for specific areas. ;AREAREPLYDIRECT YES // Set the default area for the Copy/Move function. ;AREACOPYTO THE_SAFE // Enable this to bypass the area selection list, for a "seamless" // copy/move to another area. This keyword should not be used // globally. Use it in a Random System group for specific areas. ;AREACOPYDIRECT YES // If enabled, GoldED will insert the control line "AREA:" // at the top of each message that is copied or moved. Use with care! ;AREACOPYADDID YES // If enabled, GoldED will copy all self-written mails to this area. // ;AREAYOUWROTETO MY_MAILS ---------------------------------------------------------------------- -- STATUSLINE // By default GoldED puts its logo (name and version) in the left side // of the statusline. You can change it to a small help text or // eliminate the logo entirely for a wider statusline message field. ;STATUSLINEHELP YES STATUSLINEHELP NOLOGO // Put a real-time clock in the statusline. // The format of the clock can be changed with the language // configuration keyword ST_STATUSLINETIMEFMT in GOLDLANG.CFG. // NOTE: The clock will only run continuously if KEYBMODE is set to "POLL". STATUSLINECLOCK Yes // DISPSTATUSLINE Yes ---------------------------------------------------------------------- -- MESSAGE EDITOR // Chars to display instead of CR and space in the internal editor. ;EDITCHARPARA '' ;EDITCHARSPACE ú ged+ ;EDITCHARSPACE 'ú' // Positions and lengths of name/node/date fields in header edit // These are the default values. ;EDITHDRNAMESET 8 36 ;EDITHDRNODESET 44 36 // Enable or disable the internal editor. EDITINTERNAL YES ;EDITINTERNAL NO // Define commandline for an external editor. ;EDITOR edit @file // How to execute an external editor via batchfiles. EDITOR edit @file ;EDITOR C:\4DOS\4DOS.COM /C C:\BAT\Q.BTM @file -N@line // External editor message file and internal editor backup file. EDITORFILE GOLDED.TMP // Enable the hardline feature when using the external editor. EDITHARDLINES YES // Hardline string for the external editor, if used. EDITHARDLINE << // Enable this to set the file attach attribute automatically when // entering a filename with drive (like C:) in the subject line. EDITAUTOATTACH YES // Message attributes to set automatically on file attach messages. ATTRIBSATTACH CRA // Internal editor automatic message backup interval in seconds. // Set this to zero if you don't want automatic backups. EDITAUTOSAVE 60 // When to change the "date written" when changing a message. ;EDITCHANGEDATE ALWAYS ; On all messages. EDITCHANGEDATE YES ; Only on messages written by yourself. ;EDITCHANGEDATE NO ; Never change the date. // Editor comments. Try typing these in the internal editor :-) // if word entered the comment is shown in the status bar ;EDITCOMMENT ":-(" "Don't worry, be happy!" ;EDITCOMMENT ":-)" "Are we having fun yet?" ;EDITCOMMENT ";-)" "Wink wink, nudge nugde..." ;EDITCOMMENT "GoldED" "Great program, ain't it?" // Define strings that will be expanded automatically when typed in the // internal editor. Choose your string with care or you might get // unexpected results! ;EDITCOMPLETION "/GE" "GoldED" ;EDITCOMPLETION "/FD" "FrontDoor" ;EDITCOMPLETION "/V7" "Version 7" // How to terminate text paragraphs and quoted lines. ;EDITCRLFTERM YES ; With both CR and LF. EDITCRLFTERM NO ; Only with CR. // Termination of lines or paragraphs. ;EDITHARDTERM YES ; Terminate all lines at the display margin. EDITHARDTERM NO ; Terminate only at the end of paragraphs. // Clear edit-fields when first pressing a non-editing key? EDITFIELDCLEAR Yes //+++ // Enable the "Edit menu" (pops up after header edit)? EDITMENU No // Enable the "Save menu" (pops up after ext./int. editor)? EDITSAVEMENU Yes // Automatically mix letter case when entering names in the header? // Example: "oDiNn sOrEnSeN" would be mixcased to "Odinn Sorensen". EDITMIXCASE No // Limit the size of messages GoldED can load. ;EDITMSGSIZE 64000 ; Default for the DOS version. ;EDITMSGSIZE 512000 ; Default for the 386 and OS/2 versions. // Define the commandline for a spell checker. //EDITSPELLCHECK 4DOS /CC:\PROGR\SS\SS.EXE @file //EDITSPELLCHECK ispell -d russian @file EDITSPELLCHECK C:\PROGR\SS\SS.EXE @file // How to handle the "Re:" string in the subject when replying. ;EDITREPLYRE YES ; Add "Re:" if there isn't one. ;EDITREPLYRE NUMERIC ; Add "Re^2:" if there's already one. EDITREPLYRE NO ; Remove the "Re:" if there is one. // How many lines to keep in the undelete buffer. EDITUNDELETE 100 // When importing text into the internal editor, GoldED can translate // the soft-cr (ASCII 141) character to another. // Do not forget to set DISPSOFTCR to YES! ;EDITSOFTCRXLAT H ; Example for Russians. // Right margin for editing quotes in the internal editor. // EDITQUOTEMARGIN 78 // "Robot" names. Writing a msg to one of these tells GoldED to use a // special minimal template, definable with the MS_ROBOTMSG language // keyword in GOLDLANG.CFG. ROBOTNAME AreaFix ROBOTNAME AreaMgr ROBOTNAME AreaLink ROBOTNAME FileFix ROBOTNAME Raid ROBOTNAME GEcho ROBOTNAME Allfix ROBOTNAME FileScan // What to do when writing a message to another zone. ;ZONEGATING ASK ; Pop up a menu for your decision. ;ZONEGATING YES ; Send it via the zonegate. ZONEGATING NO ; Never use zonegating. // Default destination name for new echomail/localmail messages. WHOTO All // Default filename for the internal editor import text prompt. ;INPUTFILE myfile // Text to put before and after an imported file in the i.e. IMPORTBEGIN === Begin file === IMPORTEND === End file === // Use this if you don't want any text (default is "=== Cut ==="). ;IMPORTBEGIN "" // Turn on or off the large attributes window during header edit. EDITHEADERATTRS Yes // This keyword controls which circumstances that will make GoldED // present you with the header editor first of all. ;EDITHEADERFIRST YES ; Always EDITHEADERFIRST NEW, CHANGES, FORWARDS ; Only for new or changed msgs. // SEARCHFOR ["]["] // Defines a set of search strings, separated by the '|' character. // The search set defined here is the default when using the Alt-F/Z // search functions or the marking system. ---------------------------------------------------------------------- -- MESSAGE TEMPLATES // Path to the template files. Defaults to the GOLDPATH. ;TEMPLATEPATH C:\FIDO\GOLDED\TEMPLATE\ // Select template based on the address of the message you want to // reply to. TEMPLATEMATCH YES // Message template filenames and descriptions. TEMPLATE FIDO.TPL "FIDO template" TEMPLATE INET.TPL "I-Net template" 7:1/* ;TEMPLATE NEWS.TPL "Newsgroups template" 7:1/* // FORCETEMPLATE (no) // If enabled, GoldED will popup a template selection menu when you // start writing a new msg or reply. ---------------------------------------------------------------------- -- QUOTING // Enable this to put the QUOTESTRING on quoted blank lines. ;QUOTEBLANK YES // The margin for quotes in a reply. // QUOTEMARGIN 78 // Add blank lines before and after blocks of quotes in messages? ;QUOTESPACING YES // Your quote prefix string. Must contain a '>' character! QUOTESTRING " FL> " // What if buffer already exists (ask) ;QUOTEBUFMODE ask // QUOTEWRAPHARD (yes) // This keyword controls behaviour of quoted text (wrap or reflow). // QUOTEBUFFILE // If used, it sets the default filename for the quotebuffer. If no // path is specified, the GOLDPATH is used. // NOTE: If this keyword is used in globally (in GOLDED.CFG), it // effectively disables the automatically named quotebuffers, as // described in the chapter about the QUOTEBUFMODE keyword. ---------------------------------------------------------------------- -- REPLYLINKING // How to do replylinking when replying. ;REPLYLINK Chain ; Link to last msg in a subject-based reply chain. REPLYLINK Direct ; Link directly to the original message. // How to build the replylink selection menu in JAM and Squish areas. ;REPLYLINKLIST FAST ; Use only header/subfield data. REPLYLINKLIST FULL ; Use full msgbody, parsing kludges, origin etc. ---------------------------------------------------------------------- -- CARBON COPY AND CROSSPOSTING // Message attributes to set on carbon copy messages. ATTRIBSCC PVT K/S // Format of the Carbon Copy list. ;CARBONCOPYLIST KEEP ; Keep list as entered. CARBONCOPYLIST NAMES ; Rewrite as a list of names. ;CARBONCOPYLIST VISIBLE ; Rewrite list with names and addresses. ;CARBONCOPYLIST HIDDEN ; Rewrite list in CC: kludges. ;CARBONCOPYLIST REMOVE ; Remove the carbon copy list entirely. // Format of the crossposting list. // NEW: Yes (more compact lines) CROSSPOSTLIST VERBOSE ; Expand crosspost list verbosely. ;CROSSPOSTLIST RAW ; Keep list as entered. ;CROSSPOSTLIST NONE ; Remove the crosspost list. ;CROSSPOSTLIST YES ; compact lines ---------------------------------------------------------------------- -- INTERNET FEATURES Please read the manual for details. // Your primary internet address. INTERNETADDRESS a@b.com // The organization information to put in the "Organization:" RFC header. ORGANIZATION Technical University of Vienna (Austria) // Defines the name and FTN address of your local Internet gate. ;INTERNETGATE UUCP, 1:105/42 ; Standard, with a specific gate name. INTERNETGATE 7:1/1 ; For uplinks running GIGO software. // Use a Message-ID compatible MSGID in areas marked as e-mail and newsgroups? INTERNETMSGID YES // What to do with Internet addresses when replying. ;INTERNETREPLY YES ; Always use the FSC-35 method. INTERNETREPLY NO ; Only use FSC-35 if the address is too long. // Check the nodelist system name for an Internet address. INTERNETLOOKUP Yes // Process RFC Headerlines at top of the message. INTERNETRFCBODY No INTERNETDOMAIN fidonet.org // Specify characters in addition to ">" to be recognized as quote characters. // This keyword should not be used globally. Use it in Internet GROUP's. ;QUOTECHARS "|" // Path where unpacked SOUP format packets can be found. SOUPIMPORTPATH C:\FIDO\SOUP\TEMP\ // Path where SOUP reply packets can be created. SOUPEXPORTPATH C:\FIDO\SOUP\ // Margin for SOUP style areas (76 chars is default). // SOUPEXPORTMARGIN 79 // Filename of your .newsrc file, listing the active newsgroups. // Newsgroups listed in this file are marked as newsgroups in GoldED. SOUPNEWSRCFILE C:\FIDO\SOUP\SOUPGATE\NEWSRC // Name of an area where articles for unknown newsgroups can be placed // when importing SOUP packets. SOUPBADMSGS BADMAIL // Name of an area for Internet e-mails. This must be a netmail area. // E-mails imported from SOUP packets are placed here. ;SOUPEMAIL NET_EMAIL SOUPEMAIL E-MAIL // GoldED will put the echoid of imported newsgroups in this file. // This is for use with an external replylinker. SOUPTOSSLOG c:\FIDO\UTIL\FE\IMPORT.JAM // Commandline for an external replylinker to call automatically // after importing a SOUP packet. SOUPREPLYLINKER C:\fido\util\fe\feutil link // Mark this area as e-mail. ;AREAISEMAIL E-MAIL ;AREAISEMAIL ML.* // Mark these areas as newsgroups. AREAISNEWS ALT.*, COMP.*, MISC.*, NEWS.*, AT.*, ML.*, GER.* AREAISNEWS REC.*, SOC.*, SCI.*, TALK.*, DE.*, UK.*, TELEKABEL.* // Don't use tearline and origin in e-mail CTRLINFOEMAIL NO // Don't use tearline and origin in newsgroups CTRLINFONEWS NO // Define some mailing lists. // When importing from SOUP packets, GoldED will toss e-mails to these areas // if the "Sender:" RFC header matches the Internet address. // ; EchoID Sender address Address for mail to "all" ;MAILINGLIST LIST.EMX emx-list@eb.ele.tue.nl ;MAILINGLIST LIST.GIGO gigo-owner@gigo.com gigo@gigo.com ;MAILINGLIST LIST.HELP-NET help-net@templevm.bitnet // MAILTOSS // This is acutally the same as MAILINGLIST in disguise with the // parameters recorded and it also enables the full set of pattern // matching. // Timezone for the "Date:" RFC header. // PLEASE read the manual about this keyword before using it!!! ;TIMEZONEOFFSET +0100 ; Central European Time ;TIMEZONEOFFSET +0200 ; Central European Summer Time ;TIMEZONEOFFSET -1000 ; Alaska-Hawaii Standard Time ;TIMEZONEOFFSET -0900 ; Hawaii Daylight Time ;TIMEZONEOFFSET -0800 ; Pacific Standard Time ;TIMEZONEOFFSET -0700 ; Pacific Daylight Time ;TIMEZONEOFFSET -0700 ; Mountain Standard Time ;TIMEZONEOFFSET -0600 ; Mountain Daylight Time ;TIMEZONEOFFSET -0600 ; Central Standard Time ;TIMEZONEOFFSET -0500 ; Central Daylight Time ;TIMEZONEOFFSET -0500 ; Eastern Standard Time ;TIMEZONEOFFSET -0400 ; Eastern Daylight Time ;TIMEZONEOFFSET -0100 ; West Africa Time ;TIMEZONEOFFSET +0000 ; Greenwich Mean Time ;TIMEZONEOFFSET +0100 ; British Summer Time ;TIMEZONEOFFSET +0200 ; Eastern European Time ;TIMEZONEOFFSET +0700 ; West Australian Time ;TIMEZONEOFFSET +0800 ; West Australian Daylight Time ;TIMEZONEOFFSET +0800 ; China Coast Time ;TIMEZONEOFFSET +0900 ; Japan Standard Time ;TIMEZONEOFFSET +0900 ; Central Australian Standard Time ;TIMEZONEOFFSET +1000 ; East Australian Standard Time ;TIMEZONEOFFSET +1000 ; Central Australian Daylight Time ;TIMEZONEOFFSET +1100 ; East Australian Daylight Time ;TIMEZONEOFFSET +1200 ; New Zealand Standard Time ;TIMEZONEOFFSET +1300 ; New Zealand Daylight Time ---------------------------------------------------------------------- -- QWK FEATURES // Basic QWK setup QWKIMPORTPATH C:\PROGR\TM\DOWNL\ QWKEXPORTPATH C:\PROGR\TM\UPL\ QWKBADMSGS BADMAIL // Replylinking when using GEcho and JAM areas: ;QWKTOSSLOG c:\FIDO\UTIL\FE\IMPORT.JAM ;QWKREPLYLINKER C:\fido\util\fe\feutil link // QWK conference mapping ;QWKCONFMAP GOLDWARE GoldED GOLDED ;QWKCONFMAP GOLDWARE "GoldED Beta" GOLDED.BETA ;QWKCONFMAP GOLDWARE "BBS Users" BBS.USERS ;QWKCONFMAP WHOKNOWS EMail EMAIL ;QWKCONFMAP WHOKNOWS dk.chat DK.CHAT ;QWKCONFMAP WHOKNOWS dk.test DK.TEST ;QWKCONFMAP XYZ_BBS "XYZ Usr2Usr" XYZ.USERS // QWKOPTIONS // The is the BBSID (same as the name of the QWK packet) // The can be any or a combination of the following, // separated by commas or spaces: // - KLUDGES/NOKLUDGES: Defaults to NOKLUDGES. Specifies whether or not // to include the FidoNet-style kludges at the top of messages when // exporting to QWK. // - MIXCASE/NOMIXCASE: Defaults to NOMIXCASE. Specifies whether or not // the BBS allows mixed upper/lower case in the QWK message headers. // - RECEIPT/NORECEIPT: Defaults to NORECEIPT. Specifies whether or not // the BBS supports return receipt requests (RRQ). ---------------------------------------------------------------------- -- TWIT SETUP A "Twit" is the name of an annoying user or subject. // What to do when a Twit message is found. ;TWITMODE SHOW ; Show the message as normal. ;TWITMODE BLANK ; Blank the message text. Press a key to view it. TWITMODE SKIP ; Skip the message unless it is for you. ;TWITMODE IGNORE ; Skip the message always. ;TWITMODE KILL ; Erase the message if found. // Define Twit names and/or addresses. ;TWITNAME John Doe ;TWITNAME 7:654/321.* // Define Twit subjects. ;TWITSUBJ "Yet another flame-fest" // What to do when a msg _to_ a TWITNAME is found. ;TWITTO YES ; Msgs to a TWITNAME are also Twit messages TWITTO NO ; Msgs to a TWITNAME are normal messages ---------------------------------------------------------------------- -- MISCELLANEOUS // Path to "cookie" files. Cookie files are a collection of small // multiline texts separated by empty lines. GoldED can use cookie // files in the templates using the "@random" template token. COOKIEPATH C:\FIDO\ASCII // Enable this if you want the selection bar to wrap around from // bottom to top (or vice versa) in lists. ;DISPLISTWRAP YES // Where to put the selection bar when entering a list. ;DISPLISTCURSOR TOP ;DISPLISTCURSOR NEARTOP DISPLISTCURSOR MIDDLE ;DISPLISTCURSOR NEARBOTTOM ;DISPLISTCURSOR BOTTOM // Seconds of keyboard inactivity before GoldED automatically exits. ;TIMEOUT 600 ; Exit after 10 minutes of inactivity. TIMEOUT 0 ; Never time out. // What to do if timeout happens while in the internal editor. ;TIMEOUTSAVEMSG YES ; Save the message to the msgbase. TIMEOUTSAVEMSG NO ; Leave it as "unfinished" in GOLDED.MSG. ---------------------------------------------------------------------- -- MESSAGE LIST // The message list can be fast or slow. // Slow mode gets more data from each message. MSGLISTFAST Yes //+++ // Start directly in the message list. MSGLISTFIRST No // Show the header of the message at the selection bar. // Slows down list scrolling noticably. MSGLISTHEADER No // Show a pagebar (scrollbar) for the list. MSGLISTPAGEBAR YES // Show the full subject in the bottom border of the list window. // Slows down list scrolling a bit. MSGLISTVIEWSUBJ YES // Show a wide subject column instead of a to-name column. MSGLISTWIDESUBJ NO // Change which date to show in the message list. ;MSGLISTDATE ARRIVED // Highlight unread/unsent messages in the lister and at several other // places. Note that it doesn't work with all msgbases, see manual. HIGHLIGHTUNREAD YES ; Yes, enable this feature. ;HIGHLIGHTUNREAD NO ; No, don't care (slightly faster) ---------------------------------------------------------------------- -- GIF SETUP See section about EXTERNUTIL for setting up GIF viewing. // The name of your own GIF. Don't specify an extension. ;GIF ODINN // Path to your collection of personal GIF's. ;GIFPATH X:\GFX_ART\ ---------------------------------------------------------------------- -- KEYBOARD AND MOUSE // Use the built-in default keyboard layout? (default is YES) KEYBDEFAULTS Yes // Clear keyboard buffer when starting GoldED? ;KEYBCLEAR YES // Enable or disable use of extended keycodes. // Should only be disabled on XT's. ;KEYBEXT NO // Poll mode is necessary if you want a continuous clock, autosave, screenblanker and timeout. // Block mode is recommended in multitasking environments to get 0% CPU usage. KEYBMODE Poll ;KEYBMODE Block // Stack keys to "press" automatically at startup. // WARNING: Be careful of side-effects! For example, "@S A" will mark // all messages in the area if STARTECHO is used. // NOTE: Commandline keystacking overrides this keyword! ;KEYBSTACK @S A ; Intended to "Scan All" areas. Not useful if you have "AREASCAN *". // GoldED does not have any mouse support in this release. MOUSE YES ---------------------------------------------------------------------- -- MESSAGE KLUDGE LINES // Use the INTL kludge always (YES) or only for inter-zone (AUTO). // It is highly recommended to enable it always! USEINTL YES // Use the FLAGS kludge. FLAGS is used for certain msg attributes. USEFLAGS YES // Use the MSGID/REPLY kludges. It is NOT recommended to disable it! USEMSGID YES // Use FSC-0092 style forward kludges. ;USEFWD NO ; Disable the use of the kludges. ;USEFWD ASK ; Ask the user every time. USEFWD YES ; Enable the use of these kludges. // KLUDGECHRS (yes) // If set to YES, GoldED uses the "^aCHRS" kludge instead of the // "^aCHARSET" kludge when appropriate. // Define kludges that you want to be "known" and not displayed. ;KLUDGE "SILLY:" ---------------------------------------------------------------------- -- TEARLINES, ORIGINS AND TAGLINES // Specifies whether to use a tearline and/or origin in your msgs. CTRLINFONET TEARLINE, ORIGIN CTRLINFOECHO TEARLINE, ORIGIN CTRLINFOLOCAL TEARLINE, ORIGIN // Enable this to get a blank tearline and use a PID kludge instead. ;EMPTYTEARLINE YES // Here you can modify the look of your tearline. // Note that GoldED will also add a PID kludge if the tearline does // not contain the "@longpid" string somewhere. The "@longpid" string // is "GoldED", "GoldED/2" or "GoldED/386", depending on the version. ;TEARLINE @longpid @version // The default "netname" for the origin. Not recommeded. ;NETNAME FidoNet // Your origin lines. //ORIGIN Living in interesting times //ORIGIN This is a message to @dfname :-) //ORIGIN Busier than a one-legged man in an ass-kicking contest ORIGIN @C:\FIDO\ASCII\TAGLINES.TXT IF PLUS // Invalidate (modify) quoted control information. INVALIDATE Seenby "SEEN-BY" "SEEN+BY" INVALIDATE Tearline "---" "-+-" INVALIDATE Origin " * Origin: " " + Origin: " ELSE // TIP: Use this if you don't want to quote tearline and origin. INVALIDATE Tearline "" "" INVALIDATE Origin "" "" INVALIDATE Seenby "" "" ENDIF // You should disable the internal tagline support if you are using an // external tagline utility. TAGLINESUPPORT NO // Defines the tagline character. Don't change this. TAGLINECHAR . // Define a tagline collection file. Taglines will be picked randomly. TAGLINE @C:\FIDO\ASCII\TAGLINES.TXT // Define a bunch of taglines. These can be selected from a selection menu. ;TAGLINE 2.000.000 Lemmings can't be wrong. ;TAGLINE A Smith and Wesson beats four aces. ---------------------------------------------------------------------- -- STYLECODES * Colors should be defined in the color section // Highlight words with stylecodes around them, such as *bold* etc. // (Hide) STYLECODES Yes // Characters that punctuate words for the stylecode feature. ;STYLECODEPUNCT " !?\"$%&()+,.;<=>@[\\]{|}~\n\r\t" // Characters that cancel stylecode highlight in words. ;STYLECODESTOPS "*/#_" ---------------------------------------------------------------------- -- DISK AND OPERATING SYSTEM CONFIGURATION // Path to the GoldED files. Defaults to where GOLDED.CFG was found. // It is NOT recommended to define this keyword. It is better to rely // on the default. ;GOLDPATH R:\GOLDED\ // Path where GoldNODE can place a LARGE temporary file. // Defaults to the GOLDPATH. // NOTE: This keyword MUST be in GOLDED.CFG!!! TEMPPATH C:\windows\temp\ // Enable this to open files using SHARE.EXE compatible modes. // This is required for networking/multitasking setups. SHAREMODE Yes // Add a logo-message to the PROMPT in DOS or OS/2 shells? DOSPROMPT No // Swapping methods used when shelling to DOS or external editor. // NOTE: Ignored by GoldED/386 and GoldED/2. ; DOSSWAP XMS, EMS, Disk, Hide. // Where to put program overlays (EMS/EXT/DISK). // NOTE: Ignored by GoldED/386 and GoldED/2. ; OVERLAY EMS ---------------------------------------------------------------------- -- LOGFILE // Name of the GoldED log file. It is NOT recommended to change it. LOGFILE GOLDED.LOG ; Default for GoldED for DOS ;LOGFILE GED386.LOG ; Default for GoldED for DOS/386 ;LOGFILE GED2.LOG ; Default for GoldED for OS/2 // LOGFORMAT (fd) // Defines the log format GoldED should use when writing to the logfile. ---------------------------------------------------------------------- -- NOISES AND SOUND SUPPORT // Enable to make a noise when the IE finds an EDITCOMMENT. BEEPCOMMENT YES // Enable to make a noise when encountering a message marked Local ;BEEPLOCALMSG YES // Enable various beeps and noises. This is the master ON/OFF switch. BEEPNOISES YES // When to beep when reading a message to you. ;BEEPYOURMAIL ALWAYS ; Beep every time. BEEPYOURMAIL YES ; Beep only when reading it the first time. ;BEEPYOURMAIL NO ; Never beep on your mail. // Path where sound files can be found. SOUNDPATH C:\FIDO\GOLDED\SOUND // Specify which sound file to play for an event. ;EVENT Arealist PLAY DING.VOC ;EVENT AskYesNo PLAY CHOOSE.VOC ;EVENT Attention PLAY CHORD.VOC ;EVENT DosShell PLAY BEAM_DAF.VOC ;EVENT EditComment PLAY CHORD.VOC ;EVENT EndOfMsgs PLAY CHIMES.VOC ;EVENT ErrorFatal PLAY DETRUCT.VOC ;EVENT Exit PLAY SUMBAEHH.VOC ;EVENT JobDone PLAY DING.VOC ;EVENT JobFailed PLAY HAL.VOC ;EVENT MsgDeleting PLAY TRASH.VOC ;EVENT MsgFromYou PLAY DING.VOC ;EVENT MsgIsLocal PLAY DING.VOC ;EVENT MsgIsTwit PLAY SHOTGUN.VOC ;EVENT MsgToYou PLAY HIMAN.VOC ;EVENT SearchFailed PLAY AHHHHH.VOC ;EVENT SearchSuccess PLAY YAAHUHU.VOC ;EVENT Startup PLAY TADA.VOC ;EVENT EditCompletion PLAY CASH.VOC ;EVENT Startup PLAY d:\talula.mp3 ; TheEnd A high and a low note. ; GotIt Two sets of low-high notes. ; TooBad A falling note. ; ToYou A rising and falling note. ; SayBiBi A single beep. ; SOS Morse S O S (...---...). ---------------------------------------------------------------------- -- MENU DEFAULTS // Set default for the "Delete Original?" menu. Default: YES. ASKDELORIG NO // Set default for the "Drop This Msg?" menu. Default: NO. MENUDROPMSG YES // Set default for cursor on marked/current msgs menu. // Choices are: MARKED, CURRENT, PREVIOUS or DEFAULT. ;MENUMARKED DEFAULT ---------------------------------------------------------------------- -- SCREEN AND COLORS // Seconds of keyboard inactivity before GoldED blanks the screen. SCREENBLANKER 300 ; Blank after 5 minutes of inactivity. ;SCREENBLANKER 180 BLACK ; Blank to a total black screen after 3 mins. ;SCREENBLANKER 0 ; Never blank // Use BIOS for screen writes? VERY SLOW! ;SCREENUSEBIOS YES // Force columns and/or rows if not autodetection fails? (unlikely) // It is NOT recommended to use this unless absolutely necessary! ;SCREENMAXCOL 80 ;SCREENMAXROW 25 // Screen lines setting. SCREENSIZE AUTO ; Autodetect. ;SCREENSIZE 25 ; Switch to 25 lines mode. ;SCREENSIZE 4350 ; Switch to 43 or 50 lines mode. ;SCREENSIZE 28 // Set the screen size to a special video mode. // WARNING: SELECTING THE WRONG MODE CAN DAMAGE YOUR MONITOR!!! ;SCREENSIZE MODE 54 ; Switch to video mode 54 (hexadecimal value). // Use shadows on windows and menus? SCREENSHADOWS YES // Modify color palette. ;SCREENPALETTE 0 (0 0 0) ;SCREENPALETTE 1 (0 0 2) ;SCREENPALETTE 2 (0 2 0) ;SCREENPALETTE 3 (0 2 2) ;SCREENPALETTE 4 (2 0 0) ;SCREENPALETTE 5 (2 0 2) ;SCREENPALETTE 6 (2 2 0) ;SCREENPALETTE 7 (2 2 2) ;SCREENPALETTE 8 (1 1 1) ;SCREENPALETTE 9 (1 1 3) ;SCREENPALETTE 10 (1 3 1) ;SCREENPALETTE 11 (1 3 3) ;SCREENPALETTE 12 (3 1 1) ;SCREENPALETTE 13 (3 1 3) ;SCREENPALETTE 14 (3 3 0) ;SCREENPALETTE 15 (3 3 3) // Use intense background colors? (this disables blinking colors). ;INTENSECOLORS YES INTENSECOLORS NO // Select default color set. COLORSET DETECT ; Select based on screencard and intense value. ;COLORSET NORMAL ; Select standard color set. ;COLORSET INTENSE ; Select intense color set. ;COLORSET MONO ; Select standard monochrome set. // Include a color setup from another file. INCLUDE GEDCOLOR.CFG ---------------------------------------------------------------------- -- EXTERNAL UTILITIES EXTERNOPTIONS -pauseonerror -nokeepctrl -wipe EXTERNUTIL 1 pgp +force -sa @tmpfile -u "@oname" -o @file ;sign EXTERNUTIL 2 pgp +force -ea @tmpfile "@dname" -u "@oname" -o @file ;encrypt EXTERNUTIL 3 pgp +force -eas @tmpfile "@dname" -u "@oname" -o @file ;enc & sign EXTERNUTIL 4 -pause pgp +force @tmpfile -o @file -u "@dname" ;decrypt EXTERNUTIL 5 -noreload pgp +force -ka @file -u "@dname" ;add key EXTERNUTIL 6 c:\fido\golded\mykey.bat @file ;add mykey EDITSAVEUTIL 1 "S PGP Sign the msg" EDITSAVEUTIL 2 "E PGP Encrypt the msg" EDITSAVEUTIL 3 "Y PGP EncrYpt & Sign the msg" EDITSAVEUTIL 6 "M add My PGP key" // Add these key definitions in GOLDKEYS.CFG: // F12 ExternUtil04 ; Press F12 to decrypt the current message. // #F12 ExternUtil05 ; Press Shift-F12 to add a key to your keyring. // Example for a number of other utilities. ;EXTERNOPTIONS -nocls -nopause -nokeepctrl -nowipe -noreload EXTERNOPTIONS -pauseonerror -nokeepctrl -noreload EXTERNUTIL 8 c:\progr\bat\playcd.exe ; EXTERNUTIL 9 c:\fido\fax\bgfax\view.bat c:\fido\soup\soupgate\attach\*.tif ;@subject ; EXTERNUTIL 9 c:\progr\bat\ungeek.bat @file ; EXTERNUTIL 8 -cls v:\utl\vpic.exe @gif ; EXTERNUTIL 9 -noswap c:\4dos\4dos.com /c echo.>r:\fd\fdxit1.98 // Add these key definitions in GOLDKEYS.CFG: // F11 ExternUtil07 ; View a fax // @F11 ExternUtil08 ; View a GIF // #F11 ExternUtil09 ; Touch a semaphore file ---------------------------------------------------------------------- -- PRINTER SETUP // Name of the printing device (PRN, LPT1, etc) PRINTDEVICE PRN // Add a Form Feed (12d) character after each message? PRINTFORMFEED YES // Printer initialization and reset strings. // Example for a Canon BJ-10e ;PRINTINIT #18 #27":" #27"X"#16#254 ;PRINTRESET #18 #27"X"#0#80 // Example for a HP LaserJet III (PCL-Mode): ;PRINTINIT #27#69 #27#38#97"10"#76 #27#40#115"12"#72 ;PRINTRESET #27#69 // Page length. (Number of lines to print before sending a Form Feed). PRINTLENGTH 60 // Right margin for printed messages. PRINTMARGIN 80 ---------------------------------------------------------------------- -- CHARACTER TRANSLATION // Path where the *.ESC and *.CHS files can be found. XLATPATH C:\FIDO\GOLDED\XLAT\ // Definition of escape sequence translation files. XLATESCSET COMPOSED IBMPC CMP_IBM.ESC XLATESCSET I51 IBMPC I51_IBM.ESC XLATESCSET MNEMONIC IBMPC MNE_IBM.ESC XLATESCSET MNEMONIC CP850 MNE_850.ESC // Import charsets (8-bit to 8-bit) ;XLATCHARSET AUTO IBMPC ISO_IBM.CHS ;XLATCHARSET ISO-8859-1 IBMPC ISO1_IBM.CHS XLATCHARSET IBMPC IBMPC IBM_IBM.CHS XLATCHARSET LATIN-1 LATIN-1 ISO_ISO.CHS XLATCHARSET LATIN-1 IBMPC ISO_IBM.CHS XLATCHARSET LATIN1QP IBMPC IQP_IBM.CHS XLATCHARSET MAC IBMPC MAC_IBM.CHS ;XLATCHARSET I51 IBMPC ISO_IBM.CHS ;XLATCHARSET 8859 IBMPC ISO_IBM.CHS XLATCHARSET CP850 CP850 IBM_850.CHS XLATCHARSET LATIN-1 CP850 ISO_850.CHS XLATCHARSET LATIN1QP CP850 IQP_850.CHS XLATCHARSET MAC CP850 MAC_850.CHS // Import charsets (7-bit to 8-bit) ;XLATCHARSET CANADIAN IBMPC CAN_IBM.CHS ;XLATCHARSET DUTCH IBMPC DUT_IBM.CHS ;XLATCHARSET FINNISH IBMPC FIN_IBM.CHS ;XLATCHARSET FRENCH IBMPC FRN_IBM.CHS ;XLATCHARSET GERMAN IBMPC GRM_IBM.CHS ;XLATCHARSET ISO-11 IBMPC SWE_IBM.CHS ;XLATCHARSET ISO-15 IBMPC ITL_IBM.CHS ;XLATCHARSET ISO-17 IBMPC SPN_IBM.CHS ;XLATCHARSET ISO-21 IBMPC GRM_IBM.CHS ;XLATCHARSET ISO-4 IBMPC UK__IBM.CHS ;XLATCHARSET ISO-60 IBMPC NOR_IBM.CHS ;XLATCHARSET ISO-69 IBMPC FRN_IBM.CHS ;XLATCHARSET ITALIAN IBMPC ITL_IBM.CHS ;XLATCHARSET NORWEG IBMPC NOR_IBM.CHS ;XLATCHARSET PORTU IBMPC PRT_IBM.CHS ;XLATCHARSET SPANISH IBMPC SPN_IBM.CHS ;XLATCHARSET SWEDISH IBMPC SWE_IBM.CHS ;XLATCHARSET SWISS IBMPC SWI_IBM.CHS ;XLATCHARSET UK IBMPC UK__IBM.CHS // Import charsets (7-bit to 7-bit) ;XLATCHARSET CANADIAN ASCII CAN_ASC.CHS ;XLATCHARSET DUTCH ASCII DUT_ASC.CHS ;XLATCHARSET FINNISH ASCII FIN_ASC.CHS ;XLATCHARSET FRENCH ASCII FRN_ASC.CHS ;XLATCHARSET GERMAN ASCII GER_ASC.CHS XLATCHARSET IBMPC ASCII IBM_ASC.CHS XLATCHARSET LATIN-1 ASCII ISO_ASC.CHS XLATCHARSET MAC ASCII MAC_ASC.CHS ;XLATCHARSET ITALIAN ASCII ITA_ASC.CHS ;XLATCHARSET NORWEG ASCII NOR_ASC.CHS ;XLATCHARSET PORTU ASCII PRT_ASC.CHS ;XLATCHARSET SPANISH ASCII SPN_ASC.CHS ;XLATCHARSET SWEDISH ASCII SWE_ASC.CHS ;XLATCHARSET SWISS ASCII SWI_ASC.CHS ;XLATCHARSET UK ASCII UK__ASC.CHS // Export charsets (8-bit to 8-bit) XLATCHARSET IBMPC LATIN-1 IBM_ISO.CHS XLATCHARSET IBMPC LATIN1QP IBM_IQP.CHS XLATCHARSET IBMPC MAC IBM_MAC.CHS ;XLATCHARSET IBMPC I51 IBM_I51.CHS XLATCHARSET CP850 LATIN-1 850_ISO.CHS XLATCHARSET CP850 LATIN1QP 850_IQP.CHS // Export charsets (8-bit to 7-bit or escaped 8-bit) XLATCHARSET IBMPC ASCII IBM_ASC.CHS XLATCHARSET IBMPC MNEMONIC IBM_MNE.CHS XLATCHARSET IBMPC COMPOSED IBM_CMP.CHS XLATCHARSET IBMPC VT100 IBM_VT1.CHS XLATCHARSET CP850 ASCII 850_ASC.CHS XLATCHARSET CP850 MNEMONIC 850_MNE.CHS // The character set that incoming messages are assumed to have. XLATIMPORT IBMPC ; Default ;XLATIMPORT LATIN-1 // Default character set for messages that you write. // If you uncomment the IBMPC line, your messages will have the kludge // "^aCHRS: IBMPC 2". XLATEXPORT IBMPC ;XLATEXPORT LATIN-1 // The actual physical character set. // WARNING: You should only change this from IBMPC if you have a // complete set of .CHS and .ESC files that translate to and from your // physical character set. In other words, if you are using codepage // 850 and want 100% correct translation, you must be sure that you // have 850_ISO.CHS, ISO_850.CHS, etc. etc. ;XLATLOCALSET CP850 XLATLOCALSET IBMPC ---------------------------------------------------------------------- -- MESSAGE ATTRIBUTE DEFAULTS // Attributes to set on messages in netmail areas. ATTRIBSNET LOC PVT // Attributes to set on messages in echomail areas. ATTRIBSECHO LOC // Attributes to set on messages in local areas. ATTRIBSLOCAL LOC // Attributes to set on messages in Email areas. ATTRIBSEMAIL LOC PVT // Attributes to set on messages in newsgroups. ATTRIBSNEWS LOC ---------------------------------------------------------------------- -- Special MSGBASE FORMAT SETUP // Path where you keep your AdeptXBBS ;ADEPTXBBSPATH R:\ADEPT\ // Set lastread index position for multiuser setups. ;ADEPTXBBSUSERNO -1 ; Find your lastread index automatically. ;ADEPTXBBSUSERNO 0 ; Set your lastread to index position 0. ;ADEPTXBBSUSERNO 1 ; Set your lastread to index position 1. ;ADEPTXBBSUSERNO X ; Set your lastread to index position X. // Path where the Ezycom msgbase and userbase can be found. ;EZYCOMMSGBASE R:\EZY\MSGBASE\ ;EZYCOMUSERBASE R:\EZY\USERBASE\ // Set lastread index position for multiuser setups. ;EZYCOMUSERNO -1 ; Find your lastread index in the USERS.BBS file. ;EZYCOMUSERNO 0 ; Set your lastread to index position 0. ;EZYCOMUSERNO 1 ; Set your lastread to index position 1. ;EZYCOMUSERNO X ; Set your lastread to index position X. // Path to the MSG*.DAT, LASTREAD.DAT and USERS.DAT files. ;GOLDBASEPATH M:\GOLDBASE\ // Path to the NETMAIL.DAT and ECHOMAIL.DAT files. ;GOLDBASESYSPATH M:\GOLDBASE\ // Set lastread index position for multiuser setups. ;GOLDBASEUSERNO -1 ; Find your lastread index in the USERS.DAT file. ;GOLDBASEUSERNO 0 ; Set your lastread to index position 0. ;GOLDBASEUSERNO 1 ; Set your lastread to index position 1. ;GOLDBASEUSERNO X ; Set your lastread to index position X. // Path where the PCBOARD.DAT file can be found. ;PCBOARDPATH R:\PCBOARD\ // Set lastread index position for multiuser setups. ;PCBOARDUSERNO -1 ; Find your lastread index in the userbase files. ;PCBOARDUSERNO 0 ; Set your lastread to index position 0. ;PCBOARDUSERNO 1 ; Set your lastread to index position 1. ;PCBOARDUSERNO X ; Set your lastread to index position X. // Set lastread index position for multiuser setups. ;WILDCATUSERNO -1 ; Find your lastread index in the *.LRD file. ;WILDCATUSERNO 0 ; Set your lastread to index position 0. ;WILDCATUSERNO 1 ; Set your lastread to index position 1. ;WILDCATUSERNO X ; Set your lastread to index position X. ---------------------------------------------------------------------- -- FIDO (OPUS/FTS1) *.MSG MSGBASE FORMAT SETUP // What to do about "highwatermarks". ;FIDOHWMARKS YES ; Use them to determine sent/unsent status. FIDOHWMARKS NO ; Ignore them. // Set the name of the lastread file. ;FIDOLASTREAD LASTREAD // Select format of *.MSG format message headers. // NOTE: If you select FTS1, be sure that ALL your other software // supports it. Otherwise you might see strange zone and point numbers // on addresses in some messages. ;FIDOMSGTYPE FTS1 ; Use FTS-1 format (zone/point fields). FIDOMSGTYPE OPUS ; Use Opus format (date/timestamp fields). // Replace NUL characters in the msgbody with LF characters. // Only necessary when using badly buggy programs that break FTS-1 by // putting NUL characters in the msgbody. ;FIDONULLFIX YES // Set lastread index position for multiuser setups. // Each lastread index occupies 2 bytes in the LASTREAD file. ;FIDOUSERNO -1 ; Find your lastread index in the USER.BBS file. ;FIDOUSERNO 0 ; Set your lastread to index position 0. ;FIDOUSERNO 1 ; Set your lastread to index position 1. ;FIDOUSERNO X ; Set your lastread to index position X. ---------------------------------------------------------------------- -- HUDSON MSGBASE FORMAT SETUP // Path to the MSG*.BBS, LASTREAD.BBS and USERS.BBS files. HUDSONPATH C:\FIDO\FD\MSGBASE\ // Path to the NETMAIL.BBS and ECHOMAIL.BBS files. HUDSONSYSPATH C:\FIDO\FD\MSGBASE\ // The size, in bytes, when GoldED will start warning about the size // of the MSGTXT.BBS file. The absolute size limit on that file is // 16777215 bytes. If exceeded, msgbase corruption is likely. HUDSONSIZEWARN 16000000 // Set lastread index position for multiuser setups. ;HUDSONUSERNO -1 ; Find your lastread index in the USERS.BBS file. ;HUDSONUSERNO 0 ; Set your lastread to index position 0. ;HUDSONUSERNO 1 ; Set your lastread to index position 1. ;HUDSONUSERNO X ; Set your lastread to index position X. ---------------------------------------------------------------------- -- JAM MSGBASE FORMAT SETUP // Directory where NETMAIL.JAM and ECHOMAIL.JAM can be found. JAMPATH C:\FIDO\FD\MSGBASE\ // How to delete messages in JAM areas. JAMHARDDELETE YES ; Delete them so that they don't show up again. ;JAMHARDDELETE NO ; Delete them so that they can be recovered. ---------------------------------------------------------------------- -- SQUISH MSGBASE FORMAT SETUP // Enable conversion of the DIR attribute to CRA+HLD. // This should only be used with SquishMail in conjunction with // Binkley or compatible mailers. ;SQUISHDIRECT YES // Select scanning method. The Quick method is usually reliable. // GoldED does NOT use the Squish MSGAPI in any case. SQUISHSCAN QUICK ; Scan only based on the *.SQI file. ;SQUISHSCAN API ; Check the *.SQD file for exact data. Slower. // Set lastread index position for multiuser setups. ;SQUISHUSERNO -1 ; Find your lastread index in the USER.BBS file. ;SQUISHUSERNO 0 ; Set your lastread to index position 0. ;SQUISHUSERNO 1 ; Set your lastread to index position 1. ;SQUISHUSERNO X ; Set your lastread to index position X. // Path where a Maximus/Opus format USER.BBS can be found. SQUISHUSERPATH C:\FIDO\FD\MSGBASE\ ---------------------------------------------------------------------- -- SEMAPHORE FILES When no path is given, the AREAPATH is assumed. // FrontDoor semaphore for rescanning the netmail area. SEMAPHORE NETSCAN C:\FIDO\FD\FDRESCAN.NOW // These files are for D'Bridge setups. ;SEMAPHORE NETSCAN DBRIDGE.RSN ;SEMAPHORE ECHOSCAN DBRIDGE.RSE ;SEMAPHORE EXPORTLIST ECHOMAIL.CTL // Name of file with areas to be scanned out by the mail processor. // GoldED updates this file when you write messages. ;SEMAPHORE EXPORTLIST R:\MAX\ECHOSCAN.LOG // Mark areas in the arealist if they are listed in an IMPORTLIST. ;SEMAPHORE IMPORTLIST ECHOTOSS.LOG ;SEMAPHORE IMPORTLIST IMPORTED.ARE ;SEMAPHORE IMPORTLIST CONFMAIL.OUT ;SEMAPHORE IMPORTLIST IMPORT.XYZ // Check the following semaphores for existence if GoldED is idle in // the arealist screen and do certain actions. If no path is given, // GOLDPATH is assumed. SEMAPHORE SCANALL RESCAN.GED ; Scan all areas SEMAPHORE PMSCANALL PMRESCAN.GED; PM-scan all areas SEMAPHORE QWKIMPORT QWKIMP.GED ; Import QWK packets SEMAPHORE QWKEXPORT QWKEXP.GED ; Export to QWK SEMAPHORE SOUPIMPORT SIMP.GED ; Import SOUP packets SEMAPHORE SOUPEXPORT SEXP.GED ; Export to SOUP SEMAPHORE EXITNOW EXIT.GED ; Exit GoldED immediately. ;SEMAPHORE SCANTHIS ; Scan the areas listed in the file ;SEMAPHORE PMSCANTHIS ; PM-scan the areas listed in file ;SEMAPHORE SCANNETMAIL ; Scan all netmail areas. ;SEMAPHORE PMSCANNETMAIL ; PM-scan all netmail areas. // The following keyword defines the delay between the semaphore // checks. If you set this value to zero, the feature is disabled. ;SEMAPHORE IDLETIME 30 ; Scan every 30 seconds for sema's. SEMAPHORE IDLETIME 0 ; Disable semaphore checking. ---------------------------------------------------------------------- -- AREA RENAME AND EX/INCLUSION // How to create automatic echoids. AREAAUTOID VERBOSE ; Make understandable echoids. ;AREAAUTOID LONG ; Sequential long echoids (NETMAILxxx etc.). ;AREAAUTOID SHORT ; Sequential short echoids (NETxxx etc.). // Rename areas that are given automatic echoids in AREAFILE's. ;AREARENAME NET001 NETMAIL ;AREARENAME ECHO001 BAD_MSGS // Exclude areas from the arealist. (Wildcards allowed). ;AREAEXCL ALT.FAN.* // Include areas even if excluded with AREAEXCL. (Wildcards allowed). ;AREAINCL ALT.FAN.SCHWARZENEGGER ---------------------------------------------------------------------- -- AREA SCANNING OPTIONS // Scan these areas at startup. (Wildcards allowed). AREASCAN * // Do not scan these areas at startup. (Wildcards allowed). ;AREASCANEXCL C_ECHO ;AREASCANEXCL ALT.* ;AREASCANEXCL REC.* // Scan these area even if listed with AREASCANEXCL. (Wildcards allowed). ;AREASCANINCL ALT.TASTELESS* ;AREASCANINCL REC.HUMOR* // Scan these areas for personal mail. (Wildcards allowed). ;AREAPMSCAN * // Do not scan these areas for personal mail. (Wildcards allowed). ;AREAPMSCANEXCL NET_* // Scan these areas even if listed with AREAPMSCANEXCL. (Wildcards allowed). ;AREAPMSCANINCL NETMAIL // Sort areas before scanning. The default is optimized for speed. ;AREASCANSORT XZBE // Start in a specific area, bypassing the arealist. ;AREASTART NETMAIL // Personal mail scan options. ;PERSONALMAIL ALLNAMES ; Scan with all your USERNAME's. ;PERSONALMAIL STARTUP ; Scan for personal mail at startup. PERSONALMAIL STARTUP, ALLNAMES ; Both. ---------------------------------------------------------------------- -- AREALIST OPTIONS // Automatically jump to the next marked area? AREAAUTONEXT YES // Also set msgs to read if catching-up an area? // (Needs HIGHLIGHTUNREAD YES) ;AREACATCHUPREAD NO ; No, leave them unread AREACATCHUPREAD YES ; Yes, reset the unread attribute. // Display the real board numbers instead of sequential area numbers? ;AREALISTNOS YES // Sort all areas in the area list. See the manual for sort options. AREALISTSORT PFMTUE // Content of the next-to-last column in the arealist. AREALISTTYPE New ; The number of messages after the lastread. ;AREALISTTYPE Last ; The number of the lastread message. // Set the width of the "EchoID" column in the arealist. ;AREALISTECHOMAX 16 ; Show up to 16 characters of the echoid. AREALISTECHOMAX 55 ; Show up to 16 characters of the echoid. ;AREALISTECHOMAX 0 ; Width of the longest echoid. ;AREALISTECHOMAX -5 ; Width of the longest echoid minus 5 chars. // Show a column for groupid letters or numbers on the right side? AREALISTGROUPID No // Add these menu items to the area scan menu. // The .LST file must contain lines with the echoids (wildcards // allowed) of the areas you want scanned. // The optional parameter "-Delete" tells GoldED to delete the file // after scanning. ;AREALISTSCAN "e Scan Netmail" NETMAIL.LST ;AREALISTSCAN "g Scan Newsgroups" NEWSGRPS.LST ;AREALISTSCAN "o Scan GoldED" GOLDECHO.LST ;AREALISTSCAN " Scan new mails" IMPORT.LST -Delete // Store arealist data between sessions? AREAKEEPLAST YES // Enable a pagebar (scrollbar) for the arealist. AREALISTPAGEBAR YES // What to do when trying to enter a message in a Read-Only area. ;AREAREADONLY HARD ; Don't allow it. AREAREADONLY SOFT ; Pop up a menu and ask for permission. // Change the order of "type" sorting when using AREALISTSORT. ;AREATYPEORDER Net Local Echo News Email ; put inet areas at the end AREATYPEORDER Email Net News Echo Local ; default sorting // Declare separation lines. This works well if T or G is one of // your primary AREALISTSORT options. Note: The separators are // implemented as "special" areas, so they behave more or less like // normal areas, that means that they're also sorted by AREALISTSORT. // echoid description ;AREASEP !NET "Netmail areas" 0 Net ;AREASEP !EMAIL "E-Mail areas" 0 EMail ;AREASEP !ECHO "Echomail areas" 0 Echo ;AREASEP !NEWS "Newsgroup areas" 0 News ;AREASEP !LOCAL "Local areas" 0 Local // Note: If "T" is one of the primary sortings (i.e. prior to "G"), // AREASEP X "desc" 0 Net // means that this Area-Separator is sorted in front of the first // Netmail area, regardless which group it has. // Otherwise, if "G" is one of the primary sortings (prior to "T"), // AREASEP Y "desc 2" 0 Echo // means that this Area-Separator is sorted in front of the first area // without group (Groupid = '0'). If "T" is one of the secondary // sorting types, the Area-Separator is sorted in front of the first // area with group = 0 and Type = Echo. If there's an area with // group=0 and type=Net, the Area-Separator is sorted below that area, // i.e.: // AREADEF NETMAIL "..." 0 Net [...] // AREASEP Y "..." 0 Echo // AREADEF ECHO1 "..." 0 Echo [...] // Most users have problems with understanding this very powerful // feature at first, so if you have problems with it, consult one of // the support echos. // Configure the arealist column layout. Please read the manual for // more details. ;AREALISTFORMAT "AM D C4PU4N E G " ; layout "good old days" AREALISTFORMAT "AM E CPUN G " ; layout without descs ;AREALISTFORMAT "ME D CPUN G" ; alternative layout ;AREALISTFORMAT "AM D CPUN E G " ; layout ---------------------------------------------------------------------- -- DRIVE REMAPPING // Network drive mapping (ServerDrive -> WorkstationDrive). // NOTE: This is MAINLY used to map drives in AREAFILE's. // It won't remap paths given anywhere in GOLDED.CFG. ;MAPPATH C: X: ;IF UNIX ; MAPPATH C:\ /mnt/dos/c/ ; For GoldED/LNX reading AREAFILE's. ;ENDIF ---------------------------------------------------------------------- -- MANUAL AREA DEFINITIONS // Area definitions using the AREADEF keyword. ;Syntax: Echoid "Description" Groupid Type Format Path or board Aka (Attributes) "Origin" ;AREADEF NMAIL "Nmail" A Net JAM C:\FIDO\HPT\MSGBASE\NMAIL . (Loc Pvt) ;AREADEF BAD "Bad" A Net JAM C:\FIDO\HPT\MSGBASE\BAD . (Loc Pvt) ;AREADEF DUPES "Dupes" A Net JAM C:\FIDO\HPT\MSGBASE\DUPES . (Loc Pvt) ;AREADEF NETMAIL "Netmail" 0 Net JAM C:\FIDO\FD\MSGBASE\NETMAIL . (Loc Pvt) ;AREADEF NET_DEV "FidoNet Developers" I Echo JAM M:\JAM\INT\NET_DEV . (Loc) "If you love MSGID, set it free!" ;AREADEF C_ECHO "Int. C Discussion" I Echo Hudson 117 . (Loc) "C-king forever" ;AREADEF USR2USR "Online Users" B Local Squish M:\SQUISH\USR2USR . (Loc) "The Goldware BBS" ;AREADEF EZY_TEST "Testing Ezycom" E Echo Ezycom 711 . (Loc) "Ezycom Test Area" ;AREADEF TWILIGHT "Twilight Zone" Z Echo PCBoard R:\PCB\MAIN\TWZN7 7:77/777.7777 (Loc) // Area definitions using the AREA keyword. (Old format). ;Syn: Echoid "Description" FmtTyp Path or board Akano Attributes ;AREA NETMAIL "Netmails" ON M:\MSG\NETMAIL\ 0 Loc Pvt ;AREA NET_DEV "FidoNet Developers" JE M:\JAM\INT\NET_DEV 0 Loc ;AREA C_ECHO "Int. C Discussion" HE 117 0 Loc ;AREA USR2USR "Online Users" ML M:\SQUISH\USR2USR 0 Loc ;AREA EZY_TEST "Testing Ezycom" EE 711 0 Loc ;AREA TWILIGHT "Twilight Zone" PE R:\PCB\MAIN\TWZN7 7 Loc // Get descriptions from an echolist. ;AREAFILE EchoList C:\FIDO\UTIL\FE\AREAS.BBS // Manually define descriptions. See also the manual for more details. ;AREADESC C_ECHO "International C discussion" ;AREADESC NET_DEV "FidoNet Developers" // renames Echos ;AREARENAME NET001 NETMAIL ---------------------------------------------------------------------- -- EXTERNAL AREA FILE SETUP // Default path for AREAFILE's and semaphores. AREAPATH C:\FIDO\FD\ // GoldED can get area setup from many other programs. // Uncomment and edit one of these for a quick and simple area setup. ;AREAFILE FastEcho C:\FIDO\UTIL\FE\ ;AREAFILE AdeptXBBS R:\ADEPT\ ;AREAFILE AreasBBS M:\HUDSON\AREAS.BBS ;AREAFILE DBridge R:\DB\ ;AREAFILE Dutchie R:\DUTCHIE\ ;AREAFILE Ezycom R:\EZY\ ;AREAFILE FidoPCB R:\FIDOPCB\ ;AREAFILE FMail R:\FMAIL\ ;AREAFILE FrontDoor R:\FD\ M:\HUDSON\AREAS.BBS ;AREAFILE GEcho R:\GECHO\ ;AREAFILE IMAIL R:\IMAIL\ ;AREAFILE InterMail R:\IM\ ;AREAFILE LoraBBS R:\LORA\ ;AREAFILE Maximus R:\MAX\ ;AREAFILE ME2 R:\ME2\AREADESC.ME2 R:\ME2\AREAS.BBS ;AREAFILE Opus R:\OPUS\ ;AREAFILE PCBoard R:\PCB\ ;AREAFILE Partoss R:\PARTOSS\ ;AREAFILE Portal R:\PORTAL\ ;AREAFILE ProBoard R:\PB\ ;AREAFILE QFront R:\QFRONT\ ;AREAFILE QuickBBS R:\QBBS\ R:\QBBS\AREAS.BBS ;AREAFILE RaEcho R:\RAECHO\ ;AREAFILE RemoteAccess R:\RA\ R:\RA\AREAS.BBS ;AREAFILE Squish R:\MAX\ ;AREAFILE SuperBBS R:\SUPER\ R:\SUPER\AREAS.BBS ;AREAFILE timEd R:\TIMED\ ;AREAFILE Termail R:\TERMINAT\TM\ ;AREAFILE TosScan R:\TS\ ;AREAFILE WaterGate R:\WG\ ;AREAFILE WMail R:\WMAIL\ ;AREAFILE xMail R:\XMAIL\ // Force format of the Hudson USERS.BBS file. (detect) // Overrides AREAFILE RemoteAccess if used. ;RA2USERSBBS YES ; Use RemoteAccess 2.xx format. ;RA2USERSBBS NO ; Use original Hudson format. ---------------------------------------------------------------------- -- RANDOM SYSTEM GROUPS // Allow use of group letters from AREAFILE's as group names? AREAFILEGROUPS YES // A group specifically for the echo named NET_DEV. ;GROUP NET_DEV ; MSGLISTHEADER YES ; LOADLANGUAGE GEDLNGUS.CFG ; OUTPUTFILE NET_DEV.TXT ; VIEWHIDDEN YES ; VIEWKLUDGE YES ; WHOTO All ; XLATEXPORT LATIN-1 ; AKAMATCHING override akamatching ;ENDGROUP // A group for some test echoes. ;GROUP Test: ; MEMBER *TEST* ; ORIGIN "Testing my day away" ;ENDGROUP // A group for Internet e-mail. GROUP E-Mail: MEMBER E-MAIL,ML.* CTRLINFO No EDITHARDTERM YES TEMPLATE INET.TPL ; PLAY WHEREMON.VOC ; ATTRIBUTES CRA PVT ; LOADLANGUAGE GEDLNGUS.CFG ; USERNAME odinn@winboss.dk ; XLATIMPORT LATIN-1 ; XLATEXPORT LATIN-1 ENDGROUP // A group for Internet newsgroups. GROUP Newsgroups: MEMBER ALT.*, COMP.*, MISC.*, NEWS.*, AT.* MEMBER REC.*, SOC.*, SCI.*, TALK.*, DE.*, UK.*, TELEKABEL.* EDITHARDTERM YES TEMPLATE INET.TPL CTRLINFO No ; MEMBER ALT.*, COMP.*, MISC.*, NEWS.* ; MEMBER REC.*, SOC.*, SCI.*, TALK.* ; MEMBER PINGNET.* ; LOADLANGUAGE GEDLNGUS.CFG ; MSGLISTWIDESUBJ YES ; QUOTECHARS "|;" ; USERNAME odinn@winboss.dk ; XLATIMPORT LATIN-1 ; XLATEXPORT LATIN-1 ENDGROUP // A group for Danish (FidoNet Region 23) echoes. ;GROUP Danish: ; MEMBER *_R23.*, *.23? ; LOADLANGUAGE GEDLNGDK.CFG ; TEMPLATE DANSK.TPL ; WHOTO Alle ;ENDGROUP // A group for some international FidoNet echoes. ;GROUP FidoNet: ; MEMBER GOLDED*, INTERCOOK, MUSIC, 4DOS, ENET.SOFT, ; MEMBER ENET.SYSOP, FDECHO, RA_UTIL, REGCON.EUR, OS2* ; LOADLANGUAGE GEDLNGUS.CFG ; WHOTO All ;ENDGROUP // A group for some QWK areas. ;GROUP My-QWKs: ; MEMBER XYZ.USERS ; CTRLINFO NO ; Don't use tearline/origin in QWK ; WHOTO All ;ENDGROUP // A group for areas with groupid letter 'X'. ;GROUP X ; ORIGIN "This is an origin for groupid X" ;ENDGROUP // A group for areas with groupid number 117. ;GROUP #117 ; ORIGIN "This is an origin for groupid 117" ;ENDGROUP // A catch-all group for any area not matching the above. GROUP * ; ORIGIN "Yet another forgotten area!" ENDGROUP ----------------------------------------------------------------------