If this keyword is set to hard, it is no longer possible to enter/reply/change messages in areas marked read-only with the R/O area attribute. The soft setting uses a menu to ask permission as in the previous versions. This option is designed for those who setup a system for new computer users who might be confused enough to enter a message in a read-only area despite the warning menu.

Renames one echoid to another. The feature is meant to be used in connection with AREAFILE, where some types do not store echoids with the areas (and GoldED+ then automatically gives them unique echoids).

Examples: AREARENAME NET001 NETMAIL AREARENAME ECHO001 BAD_MSGS AREARENAME LOCAL001 BBS.USERS

If enabled, the destination area selection list is bypassed, thereby making possible a seamless reply/forward to the default destination area. The destination area should be set with AREAREPLYTO.

TIP: If you run a utility or have a mail processor which copies personal mail to a separate area and puts an AREA: line at the top of the messages, you should create a random system group for the area and enable AREAREPLYDIRECT in it: Group ECHO_PERSONAL AreaReplyDirect yes EndGroup

With such a setup, GoldED+ replies directly to the area found in the AREA: line, so that you do not have to explicitly use the <Alt-N> command to reply in the original area, because GoldED+ automatically stores the reply in the appropiate area. However, if you use <ALT-N>, you can select a diffrent area (i.e. Netmail).

This keyword can be used globally and in a Random System group.

NOTE: It is probably not a good idea to enable this keyword globally.

Sets the default area for the READmovequotemsg, READmovecommentmsg and Forward functions. The default area is the first netmail area found in your setup. You should check if GoldED+ found the correct one if you have more than one. If you find yourself often forwarding or quoting from one area to another, it might be a good idea to setup a Random System group and put in this keyword.

Example: Group GOLDED AreaReplyto GOLDED.BETA EndGroup

This keyword can be used globally and in a Random System group.

Related keywords: AREACOPYTO, AREAFREQTO.

This keyword defines areas which will be automatically scanned when starting GoldED+. DOS/4DOS-style wildcards (* and ?) can be used in the echoid mask.

Examples: AREASCAN * ; Scan all areas. AREASCAN *INTER* ; Scan all areas containing INTER anywhere in ; the echoid. AREASCAN INT*.* ; Scan all areas beginning with INT and ; containing a dot anywhere in the echoid.

It is recommended to have an AREASCAN * to scan all areas at startup. If you don't want to wait for the scan to complete, you can abort the scan by pressing <ESC> during startup.

With this keyword you can prevent areas from being scanned with AREASCAN on startup. This is good if you use AREASCAN *, but have some big areas which slows it down.

Here you can specify areas to be scanned with AREASCAN even if they were excluded with AREASCANEXCL. Useful for partial reversal of wildcard specs in the excludes.

When scanning areas, GoldED+ can optimize area scanning speed if it first sorts the arealist in an order so that each msgbase format is scanned in sequence rather than on semi-random order.

If you don't like this or don't need it, you can define your own sort order.

See the AREALISTSORT keyword for the definition of the sortspecs.

You can define area separation lines between groups or areatypes. The syntax is nearly the same as the AREADEF keyword except for the fields after <type>.

Examples:

These five are area separation lines that are designed to list before each type of area. This works well when AREALISTSORT has T (for type) as one of the primary sort orders.

Example:

These can be used to separate areas with group letters (it will also work with group numbers like #117). Areas should then be sorted primarily on the group.

Example:

In these examples, I put a ! in front of the echoid to make sure it is sorted ahead of the areas. This may not be necessary in all cases, depending on the sort order in effect. If you do put ! in front of the echoid, have fuzzy sorting as the primary sort order, and type ! in the fuzzy search, you'll get the interesting effect that all area separation lines collect themselves at the top :-)

The area separation lines are implemented like a special kind of area, and are therefore sorted in the arealist just as if they were actual areas. This is also the reason why you can place the cursor bar on the separation lines. Originally I wanted to make the cursor skip the separation lines, but I think I'll leave it as it is, because it can be useful sometimes, especially when using the fuzzy feature to quickly go to an area, for example, type !C to quickly move down to the group C areas (using the group sorted example).

When configuring area separation lines, be careful to consider the AREALISTSORT, so that the lines are sorted into the positions you want. If you don't sort areas, you must make sure that the AREASEP definitions are placed correctly in your GOLDED.CFG or GOLDAREA.CFG, that is, between/before AREADEF lines.

You will note that the separation lines are not fully connected into the left and right edges. This is both by design and for practical reasons (easier to implement), not a bug.

Currently the descriptions are hardcoded to the natural location in the description column.

Normally GoldED+ starts by displaying the arealist, to let you select which area you want to read. If this keyword is defined, the arealist is bypassed and GoldED+ starts directly in the configured area. You can override AREASTART with the -E commandline switch.

This keyword allows you to change the ordering of the Net, Echo, Local, EMail and News types when sorted by AREALISTSORT.

This keyword was added to give greater flexibility to the AREASEP feature.

GoldED+ automatically copies mails written by yourself to the given area when saving a new mail. GoldED+ will also add an AREA kludge so you can see from which area the mail originally is copied from.

This keyword can be used globally and in Random System group.

If enabled, you will be asked if the message you just replied to should be deleted. Otherwise it is left untouched.

This keyword is only functional in netmail and local areas.

Defines the default <path> when selecting files for attachement.

Defines the attributes that are added to the existing attributes of a message when the file attach attribute is toggled on.

Defines the default attributes of Carbon Copy messages. CC attributes are added to the existing attributes of the original message. Usually used to add the Kill/Sent attribute.

Defines the default attributes of the Confirmation Receipt message.

Defines the default attributes of messages entered in echomail areas.

Defines the default attributes of messages entered in e-mail areas.

Defines the attributes to use for messages generated with the file request function. Suggested attributes are: PVT K/S CRA. The FRQ and LOC attributes are added automatically.

Defines the default attributes of messages entered in local areas.

Defines the default attributes of messages entered in netmail areas.

Defines the default attributes of messages entered in news groups.

Defines the default attributes for area members of the current Random System group.

If enabled, GoldED+ will make a noise when the cursor in the internal editor is moved across a word defined with the EDITCOMMENT keyword.

If enabled, GoldED+ will make a noise if it finds a msg with the Local (LOC) attributes set. This can be useful for the sysop who wants to monitor the msgs entered by users on his/her BBS.

A related keyword is DISPLOCALHIGH.

If enabled, GoldED+ makes noises when it wants attention.

NOTE: This is the master switch for all noises in GoldED+.

If set to Yes, GoldED+ will make a noise if it finds a non-received message to one of your USERNAME's. If set to Always, GoldED+ will make the noise even if it has already been marked as received.

This specifies the format of the Carbon Copy list, as it will look after processing. You can also change the format in the CC menu before processing.

The <listspec> can be one of the following:

Keep Keep the list as entered. Names Convert list to "CC: Name, Name, Name.." format. Visible Convert list to "CC: Name Address" format. Hidden Convert list to "^aCC: Name Address" format. Remove Remove the list completely.

More details can be found in the Carbon Copy and Crossposting chapter.

Using this keyword you can define or redefine all the colors used in GoldED+. See the Color Configuration chapter for details.

A complete color setup consists of a quite a lot of COLOR keywords, and it is normal practice to put them in a separate .CFG file and use the INCLUDE keyword to let GoldED+ read it. The COLORS archive contains a number of example color/mono setups. Try them out if you think the default colors stink :-)

(Normal or Mono)

Three color setups are built-in, and can be selected with this keyword.

The Normal set is the default when a color display adapter is detected. The Normal set has all black background, with bright neon-like colors for the window frames. Some hate it, some love it. :-)

The Intense set switches off the "blink" attribute, thereby enabling the use of intense (bright) colors for the background ("paper") colors as well as the foreground ("ink") colors. This is used in the Intense set to make a bright white background, sort of like the standard Windows 3.0 setup.

The Mono set is the default when a monochrome adapter is detected.

(GOLDED.CFM)

GoldED+ supports the Confirmation Receipt attribute, as used in FrontDoor 2.xx with the FLAGS CFM kludge. If GoldED+ finds an unreceived message to one of your USERNAME's with the CFM (or the RRQ Return Receipt Request) attribute set, it generates an automatic response message from the content of the CONFIRMFILE. In the file you can use many of the template tokens to personalize the automatic message. You can specify the default attributes for the message with the ATTRIBSCFM keyword.

Template tokens are explained in the Message Template chapter.

(ask)

An unreceived message to you with the CFM attribute set tells GoldED+ that the sender has requested a receipt that you have read the message. With this keyword you tell GoldED+ what to do when such a message is found. Either always automatically generate the receipt ("yes"), always ignore the requests ("no") or ask you in each case. Older versions always generated receipts.

(defaults to the GOLDPATH)

Defines the default path for the @random template token.

(Verbose)

This specifies the format of the Crosspost list, as it will look after processing.

The <listspec> can be one of the following:

None Crosspost without a list in the msgs. Verbose Change the list to lines of "* Crossposted in ..." Yes Also adds "* Crossposted in ...", but expands echolist in line rather than in column. Raw Keep the crosspost list as you entered it.

More details can be found in the Carbon Copy and Crossposting chapter.

Specifies if you want a tearline and/or origin in your messages.

This keyword can ONLY be used in Random System groups.

This may be helpful for QWK users, who can now create a group for the QWK areas and put "CTRLINFO No" in it.

(Tearline Origin)

Specifies if you want a tearline and/or origin in your echomail messages. They will be added by your echomail processor if you disable them here.

Examples:

CTRLINFOECHO Tearline Origin ; Add both tearline and origin. CTRLINFOECHO Tearline ; Add only a tearline. CTRLINFOECHO Origin ; Add only an origin.

NOTE: If you use the last example, your mail processor may get confused. However, most modern mail processors *can* handle msgs without a tearline.

(No)

Specifies if you want a tearline and/or origin in your Internet e-mail messages. This is not recommended.

(No)

Specifies if you want tearline and origin in your messages in local areas. In local areas, the tearline and origin is normally never required but can be used for cosmetic purposes.

Examples:

CTRLINFOLOCAL Tearline Origin ; Add both tearline and origin. CTRLINFOLOCAL Tearline ; Add only a tearline. CTRLINFOLOCAL Origin ; Add only an origin.

(Tearline)

Specifies if you want tearline and origin in your netmail messages. In netmail areas, the tearline and origin is normally never required but can be used for cosmetic purposes.

Examples:

CTRLINFONET Tearline Origin ; Add both tearline and origin. CTRLINFONET Tearline ; Add only a tearline. CTRLINFONET Origin ; Add only an origin.

(No)

Specifies if you want a tearline and/or origin in your Internet news articles. This is not recommended.

(yes)

This keyword specifies if GoldED+ should display the area number on the top line in the reader.

Yes Display it only if non-zero. No Never display it. Always Always display the area number.

The area number is the same as that displayed in the leftmost column in the arealist. This also means that the number displayed can be either the "real" area number (Hudson/Goldbase/Ezycom board) or the standard sequential number (toggleable with Alt-B in the arealist).

The number is displayed in square brackets to the left of the area description. I am not sure that is the best place for it - things are getting kinda crowded up there... Suggestions are welcome.

(kbytes)

Controls how the size of attached files is displayed in the header. Either the exact byte size, the rounded kbyte size, or not displayed at all. If the kbytes setting is chosen, the value is rounded according to the following formula: kbytes = (bytes + 512) / 1024. So a 600 bytes file is rounded up to "1k", but a 500 bytes file is rounded down to "0k".

(yes)

If enabled, GoldED+ will automatically jump to the next message when entering an area.

(-20 20)

Specifies the position and length of the date field in the header display. If a negative value is specified, that value is added to the current display width.

(8 36)

Specifies the position and length of the from/to name field in the header display. If a negative value is specified, that value is added to the current display width.

(44 16)

Specfies the position and length of the from/to node address field in the header display. If a negative value is specified, that value is added to the current display width.

NOTE: The attributes display moves along with the DISPHDRNODESET values.

(middle)

Selects the starting position of selection bar in the message list and nodelist browsers.

Top At the top if possible. NearTop At top + 1/3 if possible. Middle At middle of possible. NearBottom At bottom - 1/3. Bottom At bottom.

(no)

Enables/disables wrap-around when the selection bar in the main list/browser windows reaches the top or bottom.

(yes)

If enabled, GoldED+ will display the FROM name with the highlight color, if a message has the Local (LOC) attribute set.

A related keyword is BEEPLOCALMSG.

(0)

This is the right margin (display width) used for message display. If the value is 0 (zero), GoldED+ will default to the current screen width. If a negative value is specified, that value will be added to the current screen width (thereby decreasing the display width relative to the screen width).

If the DISPPAGEBAR keyword is enabled, the right margin is automatically decreased by one char.

(bytes)

When enabled, this keyword displays the msgbody size in bytes, kbytes or lines in the lower left side of the header. The size displayed is for the message body text only, the header and nul-terminator (and anything that may lurk beyond it) is excluded from the calculation.

NOTE: This feature currently only works when _reading_ msgs. While editing a msg in the internal editor, this feature is disabled - however, the size will be displayed when you are in the Save msg menu (if EDITSAVEMENU is enabled).

(yes)

If enabled, a "pagebar" (similar to the scrollbar in GUI's) will appear on the right margin, telling you about the relative size and position in the message you are reading. It is only displayed if a message is longer than a screenful.

The pagebar automatically decreases the DISPMARGIN by one char.

(no)

GoldED+ can display the message numbers in two ways:

1. As the actual (real) msg numbers. 2. As "relative" numbers, which are always sequential from msg number 1.

Normally the relative numbers are best, because they reflect the actual number of msgs in the system.

(no)

If enabled, GoldED+ will treat the so-called Soft-CR character (ASCII 141, HEX 8D) just like any other displayable character, instead of ignoring it like linefeed chars (LF). Note that by enabling this feature, you _disable_ the character translation feature that uses the Soft-CR as an escape character. This feature was added to help users in countries which use the Soft-CR character for other purposes like 2-byte characters in Japan.

NOTE: The Ezycom msgbase format requires the Soft-CR to terminate each line. Therefore this feature is unlikely to be useful to Ezycom sysops.

(yes)

If set to NO, the statusline with memory meter, clock etc. will be disabled. This option has been implemented as a temporary help for visually impaired users. More extensive help may be implemented in future versions.

(4)

The tab size (number of spaces) used when displaying the tab (ASCII 9) character, and when pressing <Tab> in the internal editor.

If you use an external editor, you should switch it to create spaces instead of tabs, because tabs are technically not allowed in FidoNet technology messages.

(yes)

If enabled, GoldED+ will add a message about itself to the DOS prompt when shelling out.

(yes)

If enabled, and you use drivespec (C:, D:, etc.) in the subject in a netmail message, GoldED+ will automatically turn on the file attach attribute. Autoattaching only works if the subject has been edited, so that subject files will not automatically be re-attached in replies.

(30)

If a non-zero value is given, the internal editor will automatically execute the EDITsavefile function with intervals of <seconds>. Good for keeping automatic backup of the message you are writing. The saved file can be restored with the EDITloadfile command. The name of the saved file is defined with the EDITORFILE keyword.

If disaster strikes (crash, lockup, power blackout, etc.) while you are writing a message in the internal editor, this feature lets you continue from the last autosaved message, which will popup automatically when you enter the internal editor again.

NOTE: This feature only works 100% if KEYBMODE is set to "poll". If KEYBMODE is set to "block", autosave won't happen until you press a key after the interval has passed.

(yes)

If set to "always", GoldED+ will always "touch" the message date in the header, if you change a message after saving it.

If set to "yes", GoldED+ will only "touch" the message date in the header, if you change a message written by yourself. This is useful in cases such as when you need to edit messages written by other people (in-transit netmails for example) which may be mis-addressed or something without messing up the date.

If set to "no", the message date is not changed when changing a message.

(' ')

This keyword defines the character GoldED+ displays at the end of paragraphs in the internal editor. This is where the CR character will be placed once the msg is saved.

(' ')

This keyword defines the character GoldED+ displays when it should display a space character in the internal editor. See also the description of the EDITCHARPARA keyword.

The keywords EDITCHARPARA and EDITCHARSPACE were added to aid me while rewriting and debugging the new internal editor. By redefining them to visible characters instead of spaces, I could see if strange things were happening while inserting or deleting characters. This was a great help. Personally I now always use redefinitions to ASCII 20 (a paragraph sign) and CP437 250 (a small dot).

This feature is mostly for fun :-)

It allows you to define words which causes GoldED+ to display a comment in the statusline, when you place the cursor on the word in the internal editor.

Example:

EDITCOMMENT ":-(" "Don't worry, be happy!" EDITCOMMENT ":-)" "Are we having fun yet?" EDITCOMMENT ";-)" "Wink wink, nudge nugde..." EDITCOMMENT "!!!" "Flame Warning!" EDITCOMMENT "GoldED" "Great program, isn't it?" EDITCOMMENT "Odin" "One more 'n' please." EDITCOMMENT "Odinn" "That's right :-)"

Have fun with it!

This feature allows you to define abbreviations which will be automatically expanded to full words or sentences when typed in the internal editor. Examples:

EDITCOMPLETION "/Odin" "Odinn" EDITCOMPLETION "/GED" "GoldED" EDITCOMPLETION "/V7" "Version 7" EDITCOMPLETION "/FD" "FrontDoor" EDITCOMPLETION "/WfW" "Windows for Workgroups"

NOTE! The abbreviation is case-sensitive. If "XX" is defined as an abbreviation, completion will NOT be triggered if "xx" is typed.

(no)

If enabled, all text paragraphs in your messages will be terminated with a CR/LF combination. If disabled, only a single CR is used. This option was created to fix a problem with an older version of the Dutchie mail processor, that apparently needed the CR/LF termination of kludge lines.

(yes)

If enabled, the input-fields will be automatically cleared for new entry, if a non-edit key is the first key pressed.

("<<")

The string is needed if you use an external editor that terminates all lines with a CR or CR/LF. The hardline string acts as a text paragraph terminator, and the normal CR's are ignored.

The concept of "hardlines" is explained in the Hardline Feature chapter.

(yes)

This keyword enables the "hardline" feature. If disabled, the EDITHARDLINE string is never written to the editor message file, and the editor message file is read back exactly as entered, including terminating CR's on all lines.

(no)

If enabled, GoldED+ will hard-terminate all lines in your messages at the editor margin. It is recommended to enable this keyword for Internet e-mail and newsgroups, because some user-unfriendly Internet software does not wrap long lines properly. But DON'T enable it in normal FidoNet echomail.

This keyword can be used globally and in Random System groups.

(8 36)

Specfies the position and length of the from/to name field in the header edit display. If a negative value is specified, that value is added to the current display width.

(44 36)

Specfies the position and length of the from/to node address field in the header edit display. If a negative value is specified, that value is added to the current display width.

(yes)

This keyword allows you to turn off the large attributes window that is shown during header edit. Even if the window is turned off, the Alt-keys are still active for toggling attributes.

(yes)

This keyword controls the circumstances that will present you with the header editor first of all.

New When entering a new message. Changes When changing a message Replies When making a reply. Forwards When forwarding a message. Yes Always (all of the above). No Never.

The New, Changes, Replies and Forwards values can be combined. YES is equivalent to enabling all four of these.

For example, we want to edit the header only when entering a new message or when changing a message:

EDITHEADERFIRST New, Changes

If the circumstances match the setup of this keyword, the header edit will be bypassed and you will start directly in the EDITMENU (if enabled) or in the internal or external editor. A new menu item has been added in the EDITSAVEMENU, "Edit Header", which allows you to edit the header after you have written your message, but before it is finally saved.

If you set EDITHEADERFIRST to NO, you must either have the EDITSAVEMENU enabled, or use the internal editor, because otherwise it is not possible to edit the header at all.

(yes)

Specifies if the internal editor should be the default, even if an external editor is defined. You can always change the setting in the editor menu (if EDITMENU is enabled) before you start writing your message.

(yes)

This keyword enables or disables the "Edit menu" that pops up right after you have edited the message header. If you disable the menu, you will go to the internal or external editor immediately and save a keystroke, but you will of course lose the features available from the menu, such as selection of template etc.

(no)

If this keyword is enabled, GoldED+ will automatically format the name with uppercase the first letter in words and lowercase the rest, when entering names in the header.

Examples:

"odinn sorensen" or "ODINN SORENSEN"

These would be re-cased to "Odinn Sorensen".

With GoldED+ it is possible to use your favorite text editor or even word processor to write messages. With this keyword you specify the commandline for the editor.

If you use a word processor, be sure to make it export clean ASCII text files without control codes.

<commandline> Program commandline. @file Token which is replaced by the editor message filename. @line Token which is replaced by the @Position template line number.

(GOLDED.MSG)

Defines the name of the temporary editor message file. This file is written by GoldED+ when swapping to the external editor, or when using the EDITsavefile command in the internal editor.

The file is written in the GOLDPATH if there is no explicit path.

(75)

Sets the right margin for editing quoted lines in the internal editor. This should be set to the same or wider than the QUOTEMARGIN.

(no)

If enabled, GoldED+ inserts the "Re:" string in front of the subject when you reply to a message. If not enabled, GoldED+ will strip any leading "Re:" when you reply to a msg.

The "Re:" string in subjects is an obsolete practice, and today it only slows down modern replylinking software. Do yourself and others a favor and let GoldED+ strip the Re: in your replies.

The "numeric" option makes GoldED+ use numeric Re:'s, of the form "Re^n:".

This keyword can be used globally and in Random System groups.

(yes)

This keyword enables or disables the "Save menu" that pops up after you have edited your message in the internal or external editor. If you disable the menu, your message will be saved (or discarded if not edited) immediately and save you a keystroke, but you will also lose the features available from the menu.

Defines the external utilities that will be added to the EDITSAVEMENU (if enabled). The menu text is inserted in the menu. The first two characters of the menu text are the "hotkey" letter that will be highlighted in the menu text, plus a space. Example:

EDITSAVEUTIL 1 "S PGP Sign the msg" EDITSAVEUTIL 2 "l PGP Clear-Sign the msg" EDITSAVEUTIL 3 "E PGP Encrypt the msg" EDITSAVEUTIL 4 "p PGP Encrypt & Sign the msg"

If you have changed the default language in this menu (in GOLDLANG.CFG), then make sure the highlight letters don't clash.

With EDITSAVEUTIL definitions and EDITSAVEMENU enabled, you can directly call an external utility to do things like encoding or encrypting msgs before saving them.

If a translation char is defined, GoldED+ will translate the soft-cr character (ASCII 141, HEX 8D) while saving message to base. The following example translates the soft-cr to an 'H' (for use in Russia):

EDITSOFTCRXLAT H

You also have to enable the DISPSOFTCR keyword.

While in the internal editor, you can use the EDITspellcheck command to save your message to a file and shell to external spellchecking software. When the check is completed, the corrected file is read back and you can continue editing your message. The EDITspellcheck command internally uses the EDITsavefile and EDITloadfile commands.

<commandline> Spellchecker program commandline. [@file] Token which is replaced by the message filename (defined by the EDITORFILE keyword).

(50)

This keyword defines the number of lines to keep in the undelete buffer between messages.

(no)

With this keyword enabled, GoldED+ will always strip the tearline down to just the three dashes, "---", and instead inserts the PID (Product IDentification) kludge line, which contains the same information, but in a safer form in a safer place. The PID kludge is proposed in FidoNet document FSC-0046.

(yes)

By default headers in e-mails MIME-encoded according to RFC. In Russia it is general practice not to encode headers, so you probably want to say No here if you're in Russia ;-) This keyword supported only in -asa versions.

Ends a Random System GROUP definition.

This keyword allows you to specify which soundfile to play when a specfic event occurs. The following <eventtype>'s are defined:

EVENTTYPE TRIGGER:

Arealist When the arealist shows. AskYesNo Any Yes/No type prompt. Attention Warnings or information popup messages. DosShell When entering a DOS or OS/2 shell. EditComment When an editcomment is found. EndOfMsgs When there are no more msgs in the area. ErrorFatal Fatal error exit. Exit Exit from GoldED+. JobDone Successful completion of a job. JobFailed Unsuccessful completion of a job. MsgDeleting When deleting a msg. MsgFromYou When a msg from you is found. MsgIsLocal When a msg marked Local is found. MsgIsTwit When a msg from a Twit is found. MsgToYou When a msg to you is found. SearchFailed Search operation failed. SearchSuccess Search operation was successful. Startup When the GoldED+ startup screen shows.

There is currently only one <eventcommand> defined:

PLAY <filename.ext/beepnoise>.

The parameter to PLAY can be either a sound file or one of the following standard beepnoises:

TheEnd A high and a low note. GotIt Two sets of low-high notes. TooBad A falling note. ToYou A rising and falling note. SayBiBi A single beep. SOS Morse S O S (...---...).

If a sound file is specified, the sound driver must support the format.

The DOS and 386 versions need a Goldware Sound API compatible TSR or program loader which installs an interrupt service function on the multiplex interrupt 2Dh. See the chapter about the Goldware Sound API for more details. The GCTVSAPI program loader (released separately) currently only supports the CT-VOICE.DRV driver for .VOC files.

The OS/2 version relies on MMPM/2 (using the mciSendString API call) to play the sound files. On my system with a Sound Blaster Pro, MMPM/2 plays both .WAV and (to my surprise) .VOC files. It even plays .MID files :-)

The Win32 version uses the Win32 API to play the sound files. It should be able to play any multimedia file that Windows knows how to handle.

Example usages:

EVENT MsgToYou PLAY HIMAN.VOC EVENT MsgIsTwit PLAY SHOTGUN.VOC

You have to select the sounds carefully and probably with a lot of experimentation, unless you want to turn your mailreader into a honking, wailing and farting monster and drive your poor family or yourself nuts with a cacophony of noises...

You can define up to 50 different addressmasks to be excluded from the compiled nodelists. Use this if you are short of space, or the nodelist compile takes very long on your system. This keyword is used by GoldNODE.

Excluded nodes can be re-included with the INCLUDENODES keyword.

Defines the default options for the EXTERNUTIL's. Valid options:

-Cls * Clear screen. -Cursor * Cursor in shell. -KeepCtrl * Keep control lines in the message. -Pause Pause for keypress before returning to GoldED+. -PauseOnError * Pause only if utility errorlevel is nonzero. -Reload * Reload the message file (@file). -Wipe Wipe editorfile and temporary file after use.

Plus the reverse options with a "No" prefix, for example -NoCls. The default options are marked with an asterisk (*).

Use -NoKeepCtrl when you want to clearsign a message. This will strip the control lines (kludges, tearline and origin) from the message before passing it to the external utility. The tearline and origin is appended to the message when reloading it. The default is to keep control lines in the message.

Use -Wipe when you want the temporary unencrypted message files to be wiped and removed from the disk after they have been read into memory. GoldED+ wipes a file by writing a block of 512 random bytes over the entire length of the file, then truncating it to zero bytes and finally deleting it. The default is not to wipe files.

This new feature can be used to "filter" msgs, for example calling PGP or other encryption utilities.

The <utilno> must be in the range 1 to 24 for utilities that will be called with key definitions (see below). Higher numbers can be used for utilities that are called from the EDITSAVEMENU (if enabled). See the EDITSAVEUTIL keyword for details.

The default options are those specified with the EXTERNOPTIONS keyword. With [-options], you can change the those options locally for specific utils. See the EXTERNOPTIONS keyword for a list of valid options.

The <commandline> specfies the DOS or OS/2 commandline you want to execute. This works in the same way as for the external editor and spellchecker. See the manual for details about this, especially if you want to execute batchfiles. In the <commandline> you can use @tokens to transfer information from the msg to the commandline. The @tokens are the same as for templates, and in addition you can use two other @tokens:

@path The GOLDPATH, including a trailing backslash. @file The full filename of the message file (GOLDED.MSG) that will be written to disk before the utility is called. @tmpfile The full filename of a temporary message file (GEDTMPxx.xxx) that will be written to disk before the utility is called.

Examples:

EXTERNUTIL 1 c:\4dos\4dos.com /c c:\crypt\encrypt.bat @file EXTERNUTIL 2 c:\4dos\4dos.com /c c:\crypt\decrypt.bat @file

To call a defined external utility, you must assign a key to it. There are 24 new keyboard commands you can use in GOLDKEYS.CFG for this purpose:

ExternUtilNN

Where NN is in the range 01 to 24 _with_ leading zero. Examples:

F11 ExternUtil01 F12 ExternUtil02

Then if you press F11, you would call external utility number 1 and so on. The ExternUtilNN keywords ONLY work in reader mode, not in the internal editor or any other place.

HOW IT WORKS:

1. Just before the external utility is called, GoldED+ writes the current message text to the GOLDED.MSG file in the GOLDPATH. The file is written as a textfile with each line CR-LF terminated. The content is exactly as you see it on the screen, which means that kludges are only included if you have enabled kludge viewing. If the -NoKeepCtrl option is used, kludges, tearline and origin are stripped before the file is written. If the token @tmpfile is used, a temporary file named GEDTMPxx.xxx (where xx.xxx is something unique) is created with exactly the same content as @file.

2. GoldED+ clears the screen and then calls the utility.

3. The utility can now load and process the @file and/or @tmpfile, or do anything else you want. It doesn't have to have anything to do with the current msg. You could call a spreadsheet, a game, whatever. But I think this feature will mainly be used for utilities that process the @file. If the utility processes the @file, it could write the changes back to the @file.

4. After returning from the utility, GoldED+ reloads the @file and displays it just as if it was the current message. For example, if your utility was a decrypter and the msg was encrypted, you would now see the decrypted msg. Neat eh? :-)

5. If you want to make the reloaded text permanent (save it in the msg), you can use the Change Msg function and immediately choose "Save Message" from the Editing menu (if enabled with EDITMENU Yes). This is in fact the method you could use if you wanted to EN-crypt a msg (however, it is easier to use the method which involves the EDITSAVEUTIL keyword).

The QUOTESPACING feature can interfere with encoded msgs that include the '>' character at the beginning of lines (often seen in uuencoded msgs), by automatically inserting blank lines before and after the lines with '>'. I have therefore changed the quotespacing default from YES to NO. Be sure to check if you have a different setting if you are using an older edition of the advanced configuration files.

If the string "-----BEGIN PGP MESSAGE-----" is found as the first 27 characters in a reloaded message, GoldED+ will automatically add the FSC-0073 kludge "^aENC: PGP" to indicate that the message is encrypted. This kludge may be used by some software to set up alternative routing for encrypted mail which would otherwise be bounced if sent through normal channels.

See the "Using PGP as an External Utility" chapter for batchfile examples and instructions on how to use this new feature with PGP.

!!! IMPORTANT !!! From FidoNet Policy 4.07 (chapter 2.1.4):

"[..] Therefore, encrypted and/or commercial traffic that is routed without the express permission of all the links in the delivery system constitutes annoying behavior."

So be careful with this feature!

TIP: You can use the EXTERNUTIL feature to setup keys to view or print an attached fax. Use something like this in GOLDED.CFG:

EXTERNUTIL 11 c:\zfax\zfax.com pf @subject ; print fax EXTERNUTIL 12 c:\zfax\zfax.com vf @subject ; view fax

And this in GOLDKEYS.CFG:

@F11 ExternUtil11 ; Press Alt-F11 to print the fax @F12 ExternUtil12 ; Press Alt-F12 to view the fax

Or choose your own key assignments and fax view/print utils.

Note that this assumes that the fax file is listed in the subject line like an attached file.

NOTE: If you're running GoldED+/386 and try to use a Win32 program as an EXTERNUTIL, you might get the error "This program cannot be run in DOS mode". You can work around this by calling the Win32 program via the shell. For example if this call fails:

EXTERNUTIL 1 c:\utl\mywin32.exe @file

Replace it with:

EXTERNUTIL 1 command.com /c c:\utl\mywin32.exe @file

Then it should work. If not, try using full path to command.com.

Defines the base path for the Ezycom msgbase. If not set, AREAFILE Ezycom will set it.

Defines the base path for the Ezycom userbase. If not set, AREAFILE Ezycom will set it.

(0)

Defines the lastread set used in the Ezycom message base.

(no)

If enabled, GoldED+ will use the echomail "highwater mark" (1.MSG) to determine if a message is "sent" or "unsent" in *.MSG areas.

NOTE: Some older echomail processors do not update the highwater mark in a way that GoldED+ can recognize. If all messages appear to marked "Uns", even after the mail has been scanned out, try turning off this keyword.

(LASTREAD)

Defines the filename of the *.MSG lastread files. DO NOT specify a path.

(Opus)

This keyword defines the default format of Fido *.MSG files. It is only used by some AREAFILE's when reading external area configuration files, where the preferred format is unknown.

The FTS1 (FTS-0001.012 and later) format uses zone/point fields, where the Opus format uses date/time stamps. When set to Opus format, GoldED+ interprets the date/time stamps as DOS-style bitmapped date/time.

(no)

If set to YES, GoldED+ will replace NUL chars with LF chars in the msg body when reading a Fido *.MSG file. This is slower of course, but not noticably on fast machines.

This option was created to enable GoldED+ users to read msgs that were created/handled by brain-dead programs (I don't have names, sorry) which are not obeying our primary technical standard: FTS-0001. FTS-1 states that a NUL terminates the msg body. But sometimes msgs are encountered which have a NUL as the first char in the msg body or perhaps in other places, thereby causing GoldED+ to show a blank or cut-off msg. In some Pascal-based readers, such as FM, these msgs can be read anyway, because in Pascal a NUL does not terminate a string like in C/C++.

NOTE: Even if the new FIDONULLFIX keyword is disabled, GoldED+ will still fix a NUL if it is the _first_ character in the msg body. This probably fixes most of these buggy msgs without the overhead of checking the entire msg.

Path and filename of a FIDOUSER.LST file.

This file is expected to be sorted in ascending alphabetical order using plain ASCII case-insensitive sort. Each line in the list is expected to be 60 characters plus a CR and a LF, or in other words records of 62 bytes each. If the list is produced by a nodelist compiler, everything should be okay, but be careful if you have edited the file manually. Note that a FIDOUSER.LST file only supports a name lookup (to get the address).

(0)

This is an index into the FIDOLASTREAD file. Each user occupies 2 bytes in the lastread file.

Used to define short alias names for filenames. If you regularly write msgs to different files in different paths, this feature is very useful, and reduces the risk of typing wrong.

Example:

FILEALIAS DKB R:\DKBBS\DKBBS

With this file alias, you can simply write "DKB" at the filename prompt, and the long filename will be used.

(yes)

Enables or disables a pagebar (scrollbar) in the file attach list function.

(no)

If enabled, GoldED+ will popup a template selection menu when you start writing a new msg or reply. If you have both TEMPLATE(s) and FORCETEMPLATE in a Random System group, you can tell GoldED+ to use the random template(s) by hitting ESC instead of selecting from the menu.

This keyword can be used globally and in Random System groups.

(no)

Used when saving messages to file. If enabled, it inserts a Form Feed (12d) character after each message.

With this keyword you can add extra known filename extensions for the filerequest function. The following extensions are already known by default, and need not be defined (duplicate definitions are ignored):

.ARC .ARJ .DOC .EXE .GIF .LHA .LZH .JPG .PAK .PNG .RAR .RUN .SDA .SDN .TXT .ZIP .ZOO

Each extension _must_ have the leading dot.

Example: FRQEXT .XYZ

This keyword is used for the file request feature (Ctrl-F). It allows you to define mappings from a nodenumber used in a file announcement to another nodenumber. This is useful in the cases where a multi-line system announces files using their primary nodenumber, which may be a regular V34 modem number, but they also have an ISDN number, which you would prefer to use instead. Examples:

// change-to: from: FRQNODEMAP 2:236/99 2:236/100 FRQNODEMAP 2:236/1043 2:236/43

So, if I saw a file announcement from 2:236/100, and requested some files, the request would automatically be addressed to 2:236/99.

(FromTop)

Defines options for the file request function:

Sort Sort the list of files alphabetically. FromTop Scan the message from the top of the message. NotFromTop Scan the message from the top of the screen. NoFiles Don't list the file FILES if no files were found. NoWazooMsg Don't save the request message. Fast Bypass the header edit and save the msg immediately.

By default, the "FromTop" option is enabled. If you often request files from very long announcement messages, you might find it very useful to set the "NotFromTop" option.

The "NoFiles" option was added because if no filenames are found in a message, the file request function defaults to listing the magic name FILES instead of complaining that no files were found.

If the FRQWAZOO keyword is enabled, the default behaviour is to save the request message with the FRQ attribute stripped. Use the "NoWazooMsg" option if you don't want the request message.

Use the "Fast" option if you find that you almost never change the destination of the file request message anyway. If you enable this option, remember that you can always go over to the netmail area and change the file request message before it is sent.

The UseFlowFile option enables a feature which was default in 2.50, but which I have been informed is problematic for modern mailers in some setups. The default is now to ONLY create/update the .REQ file and NOT also touch/create a .?LO flowfile.

(no)

If enabled, GoldED+ will create WaZOO .REQ files instead of file request messages. You must define an OUTBOUNDPATH if you enable this feature.

(yes)

If this switch set to yes GoldEd displays handshake char in statusline. If you annoyed with this feature you could hide this character by setting this option to no.

(autodetect)

This option is meanful for w32 version only. Due to right Alt key required to enter some native characters in german version of Windows it could be defined to yes for this.

Specifies the directory where GoldED+ can find the Goldbase msgbase files.

Specifies the directory where GoldED+ can find the NETMAIL.DAT and ECHOMAIL.DAT files of the Goldbase msgbase. If not specified, the GOLDBASEPATH is used.

(0)

Specifies the lastread set used in the Goldbase message base.

This is the path where GoldED+ finds all it's control files. It is not necessary to define this, unless you have special needs. The GOLDPATH defaults to directory where the GOLDED.CFG file was found.

Starts a Random System group. See the Random System chapter for details.

(no)

If enabled, GoldED+ updates (increases) the "timesread" field in each message that you read. If set to NO, it doesn't touch the message. The YES setting causes a slight performance decrease, because the header of each message has to be read, the timesread field updated and the header written back to disk. The update happens immediately after the message is displayed, so you may not notice it at all. A message is only updated if the timesread field contains the value 0 (zero).

This keyword only works in the following msgbase formats: Fido (*.MSG), Hudson, Goldbase, JAM, Squish, Ezycom and AdeptXBBS. In Squish and Ezycom, there is no timesread field, but I have annexed a reserved message attribute (in Squish, 0x00080000, now called MSGSEEN; in Ezycom, extattr 0x80) for the purpose of marking a message as read at least once. The other formats (PCBoard, WildCat) have no timesread field, but they have reserved fields or attributes which *could* be used. Let me know if you want this.

Specifies the directory where GoldED+ can find the Hudson msgbase files.

(16000000)

When the Hudson MSGTXT.BBS file exceeds this size, GoldED+ starts to warn that the msgbase is getting dangerously close to the structural limit (which is 16MB for the MSGTXT.BBS file). With this keyword you can raise or lower the warning size in case you think the default is too low or too high.

Specifies the directory where GoldED+ can find the NETMAIL.BBS and ECHOMAIL.BBS files of the Hudson msgbase. If not specified, the HUDSONPATH is used.

(0)

Specifies the lastread set used in the Hudson message base.

(no)

If set to yes then GoldEd ignores CHRS kludges in messages thus you will be able to switch codepage in messages with inappropriate charset.

("=== Cut ===")

This keyword, together with IMPORTEND, defines some text to add in the beginning and end of an imported text file in the internal editor. If only IMPORTBEGIN is defined, the text is also used for the IMPORTEND. The <text> may be enclosed in quotes ("") if leading or trailing spaces are needed. The quotes are stripped.

The replacement token "@file" can be used in the <text>. It will be replaced with the import filename as entered.

Example:

IMPORTBEGIN === Cut Begin: @file === IMPORTEND === Cut End ===

(same as IMPORTBEGIN)

See IMPORTBEGIN.

(defaults to GOLDPATH)

The inbound path is currently only used with the file request feature (the READfilerequest command, <Ctrl-F>). If you use this feature, GoldED+ will put the file descriptions into a FILES.BBS in the inbound path, ready for when the requested files are moved to the correct file areas.

You can define up to 50 different addressmasks to be included from the compiled nodelists. This is only used in conjunction with the EXCLUDENODES keyword to include otherwise EXcluded nodes. This keyword is only used by GoldNODE.

(*)

Defines the default name in the internal editor file import function.

GoldED+ can automatically uuencode and apply a base64 encoding to the files during importing them into the internal editor.

NOTE: This is a very simple implementation of encoders. It cannot split large files over several messages. The file mode number 644 is hard-coded and has nothing to do with the actual file mode.

This keyword can be used globally and in Random System groups.

(no)

GoldED+ is capable of switching off the "blink" color, and thereby enabling the use of bright background (paper) colors. Enable this keyword, and try out one of the intense color setup examples.

Specifies your Internet address. This must be the address only, no name. The INTERNETADDRESS and USERNAME will be combined to a standard "From: internetaddresss (username)" headerline when you write e-mail or articles.

Example:

USERNAME Odinn Sorensen INTERNETADDRESS odinn@ibm.net

Produces the RFC line:

From: odinn@ibm.net (Odinn Sorensen)

(username%domain.net)

Defines the domain-part of outgouing Message-ID's. If you don't know your full domain, leave it as default, which should work just fine.

Defines the local Internet gate you use when sending netmail to Internet users. This option is activated when you write an Internet address in the TO: field in the header display. GoldED+ detects the Internet address by looking for the '@' character. If detected, GoldED+ puts the gate address from INTERNETGATE in the TO: address field. If you have defined the optional gate name (typically UUCP), GoldED+ also replaces the typed Internet address with the gate name and puts the Internet address in a TO: line in the message body. Some gate software accepts the Internet address directly in the header, while other software may need the special (UUCP) name and a separate TO: line. Examples:

INTERNETGATE UUCP, 1:105/42 ; Standard, with gate name INTERNETGATE 2:230/9316 ; My uplink runs GIGO software

This keyword can be used globally in GOLDED.CFG, if you only ever use one gate, or in GROUP's for specific areas in GOLDRAND.CFG if you have multiple netmail areas and regularly use more than one gate.

NOTE: If you enable the INTERNETRFCBODY keyword, you should always use the gatename UUCP, because otherwise the gateway software may send duplicate copies (carbon copies) of your e-mails.

(no)

If set to Yes, GoldED+ will check the systemname in the nodelist when doing a lookup and if the systemname looks like an Internet address (contains an '@' char), the msg will be addressed to that Internet address using the INTERNETGATE name/address if defined.

For example, let's say there was something like this in the nodelist:

,999,somebody@somewhere,Whereever,Some_Body,...

And this in my GOLDED.CFG:

INTERNETLOOKUP Yes INTERNETGATE 2:230/9316

Then if I did a lookup of "Some Body" and selected the entry with the Internet address, GoldED+ would make a msg looking like this:

-------------------------------------- From : odinn@winboss.dk 2:236/77 To : somebody@somewhere 2:230/9316 Subj : whatever --------------------------------------

Or if my gate was defined as "INTERNETGATE UUCP 2:230/9316":

-------------------------------------- From : odinn@winboss.dk 2:236/77 To : UUCP 2:230/9316 Subj : whatever -------------------------------------- To: somebody@somewhere

So what's the use of all this? It allows you to make a nodelist-style list of users with Internet addresses and use it with GoldED+ so that you can do a lookup of normal names instead of trying to remember strange Internet addresses. Of course something similar could be done using the ADDRESSMACRO's, but with the nodelist approach, you could build a "network" of users which have offline Internet access via FTN-gate software and distribute the nodelist for automatic processing.

(no)

Specifies whether the FTN MSGID kludge should contain an RFC1036 compatible Message-ID or the normal FTS-9 format. Note that using the RFC1036 format in MSGID breaks the FTS-9 (version 001) specification, so please don't use this feature in FidoNet netmail or echomail. As a safeguard, GoldED+ will only use the RFC1036 format in areas specifically marked as e-mail or newsgroups, using the SOUPEMAIL and SOUPNEWSRCFILE keywords or using the Email and News area types with the AREADEF keyword, even when INTERNETMSGID is set to YES globally.

(yes)

When INTERNETREPLY is enabled, GoldED+ always uses the FSC-35 REPLYADDR/REPLYTO kludges to gate replies to msgs from Internet correctly. If disabled, GoldED+ only uses the FSC-35 method if the Internet address is too large to fit in the max-35-character TO: header field. Some gate software requires that the FSC-35 method is used, while other software accepts Internet addresses directly in the header.

(no)

Tells GoldED+ whether to look for and process RFC headerlines at the top of the message body, before the first empty line. Also tells GoldED+ to insert its own RFC headerlines at the top of the message body instead of as kludge lines. This option should only be used when receiving Internet mail as QWK packets where the RFC headerlines are usually found at the top of the messages, or when sending Internet mail via FTN packet to a gateway running GIGO. GIGO does not recognize RFC header in kludges, but it does recognize them at the top of the messages, if it is properly configured (with lines of "Allow_Xxx:" in GIGO's HEADERS.CFG, where Xxx are the RFC headerlines the gate administrator wants to allow).

This is used to invalidate (change) certain control strings in quoted text. Use this in conjunction with old versions of D'Bridge or other software that chokes on control strings in quoted text. As an added bonus feature, if the tearline or origin is invalidated to a null string (""), they will not be quoted at all.

The <type> can be one of the following:

Tearline Invalidate tearline ("---"). Origin Invalidate origin (" * Origin: "). Seenby Invalidate SEEN-BY's.

By default, the following invalidations are used:

INVALIDATE Tearline "---" "-+-" INVALIDATE Origin " * Origin: " " + Origin: " INVALIDATE Seenby "SEEN-BY" "SEEN+BY"

If you want to disable invalidation entirely, use this:

INVALIDATE Tearline "---" "---" INVALIDATE Origin " * Origin: " " * Origin: " INVALIDATE Seenby "SEEN-BY" "SEEN-BY"

The defined INVALIDATEs are also used during importing a file when editing a mail in the internal message editor.

(no)

The default setting makes GoldED+ conform to the JAMAPI specs when deleting msgs in JAM msgbases. This means that deleted msgs are only marked as such in the message header, not in the index. As a result, GoldED+ will find and display the deleted msgs until you run a message pack utility to physically remove the deleted msgs.

If JAMHARDDELETE is set to Yes, GoldED+ will zap the reference to the message in the index when deleting msgs. This way the deleted msgs will not show up again later. The drawback of this approach is that it is hard to undelete msgs, and may break other software which assume 100% to-the-letter conformance to the specs. Note however, that the hard-delete method is transparent to normal use of JAM msgbases. Probably the only software that might break are undelete utilities.

For the techies and programmers, the hard-delete method is simply setting both UserCRC and HdrOffset in the index to 0xFFFFFFFF instead of only the UserCRC. According to the JAMAPI specs, a value of 0xFFFFFFFF in HdrOffset means that "there is no corresponding message header". Sounds remarkably like a deleted msg, right? :-)

(defaults to the HUDSONPATH)

Defines the path where GoldED+ can access the NETMAIL/ECHOMAIL.JAM files, which are used by mail processors to find and scan out mail written by users.

GoldED+ can handle enviroment variables correctly in paths specified in connection with this keyword. For example, if a path is defined as %MAIL%\path\name, and SET MAIL=C:\POINT is in AUTOEXEC.BAT (or whatever), then GoldED+ translates the path to C:\POINT\path\name. NOTE: The translation is done at config compile time, so if you change the environment variable and haven't changed anything else that would cause GoldED+ to recompile it's config, you must force it with the -F or -FF command parameter.

(no)

Tells GoldED+ whether or not to clear the keyboard buffer on startup. This also clears KEYBSTACK or commandline key stuffing. In older versions of GoldED+, it was necessary to enable this keyword if you had renamed GOLDED.EXE to DBEDIT.EXE. This version detects the .EXE renaming and automatically enables KEYBCLEAR, regardless of the configuration setting.

(yes)

GoldED+ defines a default keyboard configuration setup internally. The keys can be reconfigured in the GOLDKEYS.CFG file. By default, the internal keyboard setup is active always, redefinable with the definitions in GOLDKEYS.CFG. But in some cases it can be preferrable that the internal keyboard setup is turned off, so that only the keys in GOLDKEYS.CFG are active. If you want this, set KEYBDEFAULTS to NO.

(detect)

If enabled, GoldED+ will use extended bios calls to read the keyboard. With the extended keyboard, you can use keys like <Alt-Left>, <Alt-Home> and other extended keys. If you don't have an extended keyboard, don't despair - using a few neat tricks, I have made it possible to use some of the extended keys even with a non-extended keyboard.

(poll)

If this option is set to Poll, GoldED+ switches its keyboard handling code from "blocking" to "polling" mode. This enables GoldED+ to provide a continuously running statusline clock, automatic internal editor autosave, timeout exit and screensaver. If set to Block, the timeout exit and screensaver are disabled, and the clock and autosave are dependent on key presses.

In order to minimize waste of CPU resources in keyboard polling mode, GoldED+ automatically detects DESQview, Windows and OS/2 and releases timeslices during the keyboard poll.

With this keyword, you can "stack" keys in the keyboard buffer. The KEYBSTACK can be overridden by commandline keystacking, which uses the same syntax.

The <keystring> can be a mixture of the following:

^Char Ctrl-key (^Letter). ~Char Ctrl-key (~Letter). (Use this with 4DOS!). @Key Alt-key (@Number or @Letter). Char Literal character. "String" String, enclosed in double quotes. 'String' String, enclosed in single quotes. Number Keyboard scan code (decimal). ! Clear keyboard buffer.

Whitespace (space and tab) is ignored, except in quoted strings.

See the chapter for more info.

The definition may optionally be enclosed in quotes. A definition must be enclosed in quotes if it contains leading or trailing spaces. The KLUDGE tells GoldED+ which kludges it should consider as "known" in addition to the built-in known kludges.

Here are a bunch of examples, most of which are kludges generated by the GIGO Internet gateway software:

KLUDGE " " ; For wrapped kludges KLUDGE "Content-Type:" KLUDGE "Date:" KLUDGE "From:" KLUDGE "In-Reply-To:" KLUDGE "Message-Id:" KLUDGE "Mime-Version:" KLUDGE "Organization:" KLUDGE "Newsgroups:" KLUDGE "Received:" KLUDGE "Reply-To:" KLUDGE "Sender:" KLUDGE "Subject:" KLUDGE "To:" KLUDGE "Errors-To:" KLUDGE "X-FTN-From:" KLUDGE "ORIGREF:" ; Gated? KLUDGE "ORIGID:" ; Gated? KLUDGE "RFC-" ; Seen in NET_DEV

The kludges defined with KLUDGE are not case-sensitive, but when GoldED+ looks for the kludges, it matches to the exact length. This means that for example "RFC-" will match all kludges beginning with that string.

The ASCII 1 kludge char should not be included in the definition string, but GoldED+ can handle it if you do.

(yes)

If set to YES, GoldED+ uses the "^aCHRS" kludge instead of the "^aCHARSET" kludge when appropriate.

If defined, this keyword will load a language definition file.

This feature can be used to load a small set of national language definitions in national areas, an english set in international areas, etc. Typically this would be used to load the definitions of the date/time strings for use in the template and the Msg/From/To/Subj strings in the header display.

In the ADVANCED archive, a set of GEDLNG*.CFG files are provided, which are designed for use with LOADLANGUAGE. Please note that there is also a @loadlanguage template token. This way you can choose to load a language file from the template, or by using the Random System. The template token takes precedence over the LOADLANGUAGE in the Random System, but if both are defined, both will be loaded.

This keyword can be used globally and in Random System groups, but it is probably not very useful when used globally.

(GOLDED.LOG)

Defines the name of the GoldED+ logfile. You should not change the default.

(fd)

Defines the log format GoldED+ should use when writing to the logfile.

(no)

If enabled, GoldED+ will use nodelist lookup when entering the TO: name in msgs in echomail areas.

GoldED+ *won't* lookup the name if it exactly matches the current WHOTO - text. This is a feature, because a lookup of "All" is not very useful. :-)

(no)

If enabled, GoldED+ will use nodelist lookup when entering the TO: name in msgs in local areas.

GoldED+ *won't* lookup the name if it exactly matches the current WHOTO - text. This is a feature, because a lookup of "All" is not very useful. :-)

(yes)

If enabled, GoldED+ will use nodelist lookup when entering the TO: name in msgs in netmail areas.

(no)

If enabled, GoldED+ will attempt to find a matching username in the user database if a to-name with wildcards is entered in echo or local areas.

The userbase lookup feature is not new, but a need arose for an option to turn off the lookup. I decided to let the default be to disable the lookup. Previously the lookup was always enabled.

Defines one or more mailing lists. When importing e-mail from a SOUP packet, GoldED+ will look at the Internet address in the "Sender" header and if it matches one of the MAILINGLIST's, the e-mail will be tossed to the defined area. Note that GoldED+ supports only participation in, not hosting of mailing lists. The contribution address is the destination Internet address for mail you write to the mailing list - the address is typically given to you when you subscribe to a list. If the contribution address is not specified, the senderaddress is assumed.

This is acutally the same as MAILINGLIST in disguise with the parameters recorded and it also enables the full set of pattern matching. The <pattern> can be written exactly as if in the prompt for the advanced search feature.

Any number of MAILTOSS lines can be given for a particular list, if there is for some reason no single way to identify the list.

When determining the contribution address, the first MAILTOSS (or MAILINGLIST) that matches the echoid is chosen.

MAILTOSS and MAILINGLIST can both be used at the same time and for the same lists. MAILINGLIST is always the faster, because it looks only at specific headerlines. MAILTOSS uses much more complex pattern matching and can even match based on message body content.

This keyword is used to map paths, for example if you have different drive letters on a server machine and a workstation. You might have your FidoNet mailer and mail processor setup to run with the server drive letter (C:), but run GoldED+ from a workstation where that drive is mapped to a different letter (J:). If you use AREAFILE's to get the area configuration for GoldED+, you need to use MAPPATH to map the server drive letter to the workstation equivalent.

Another case might be that you have a setup with DOS-style paths and want to run the Linux version with the same GoldED+ setup. You can then use MAPPATH to map the DOS drive-based paths to Unix style paths.

Examples:

MAPPATH C: J: MAPPATH C:\ /mnt/dos/c/

NOTE: You don't have to worry about backslash/forwardslash in this case - they are always mapped automatically to the correct type for the operating system.

Defines Random System group members. See the Random System chapter for details.

(no)

Defines the default selection in the "Drop This Msg?" menu.

(default)

Specifies the position of the selection bar in the Marked/Current menu.

Marked Set selector to Marked. Current Set selector to Current. Previous Set selector to previously selection. Default Set selector to Marked if there are marked msgs.

Note that older versions (before 2.50) used the equivalent of the "previous" setting.

(no)

The mouse support in GoldED+ is currently not functional, so this keyword is ignored.

(written)

Can be used globally and in groups. This keyword specifies the default date shown in the right column in the message list. If "no" is specified, the date column is removed and the space used to widen the other columns. Personally I prefer to see the "arrived" date, which is why I implemented this feature.

The key command LISTtoggledate (Ctrl-D) toggles between them.

Note that the "arrived" date doubles as the "processed" date for messages that are written locally and scanned out from your messagebase.

Not all messagebase formats supports all three dates. The table below shows which messagebase supports which dates:

Written Arrived Received JAM X X X *.MSG X X Squish X X Ezycom X X Hudson X Goldbase X PCBoard X

If a date is not supported, "n/a" (for "not available") is shown instead.

(yes)

The message lister can operate in two ways, fast or slow. In the fast mode, only the message headers are loaded for the list information. Depending on the msgbase format and message type, some information may not be quite the same when presented in the lister because information which is gathered from kludges or other control information in the message text will be missing. Most of the time this may not be a problem, so if you want speed, chose the fast mode (default).

The slow mode loads and fully interprets the content of each message before the message list is presented. The slowness is most noticable when entering the lister and when paging up and down. You may want to use the slow mode for areas with Internet newsgroups and e-mail, where GoldED+ uses the "From" kludge to get the real name of the message writer.

This keyword can be used globally and in Random System groups.

(no)

If enabled, GoldED+ automatically starts the message lister when entering an area.

This keyword can be used globally and in Random System groups.

(no)

If enabled, GoldED+ shows the header of the current message when you scroll the bar up and down. This is how it worked in previous versions. If disabled, GoldED+ does not show the header and instead uses the screen space to show more messages. By eliminating the header display, it is also much faster at scrolling the list.

This keyword can be used globally and in Random System groups.

(yes)

Enables or disables a pagebar (scrollbar) in the message list.

(yes)

If enabled, GoldED+ will display the full subject in the bottom border of the list window. Note that this feature slows down scrolling a bit.

(no)

If enabled, the Subject column is made wider by removing the To column. This is especially useful in gated Internet newsgroups, where the To name is always "All".

You can toggle between wide and short subject with Ctrl-B (keycommand LISTtogglewidesubj).

This keyword can be used globally and in Random System groups.

(NAMES.FD)

GoldED+ supports the "address macro" file supported by FrontDoor and Maximus. If no path is specified, the file is first searched for in the path from the "FD" environment variable and then the GOLDPATH, if the FD variable failed.

The address macros are added *after* those defined with the ADDRESSMACRO keyword (if any) (see this for details on the format).

Defines the nick name (pseudo) for the current USERNAME. Can be used globally and in random system groups.

Here you define the nodelists that are used by GoldED+ and the companion nodelist compiler GoldNODE. The nodelists must generally be in the standard "St.Louis" nodelist format, but they can also contain FrontDoor/Version7 style Boss/Point extensions. The default zone is defined by the first ADDRESS or AKA, but can be overridden by adding the zone number or a full address after the filename. GoldED+ currently needs it's own special index files to use the nodelists. These index files are created by GoldNODE.

<file> Nodelist file. If the extension is .999 or a wildcard (".*"), the newest file with a numeric extension is used. [zone/addr] Default zone or address for the nodelist (if no zone info is present in the list itself).

See also the USERLIST keyword, and the Nodelist Browsing chapter.

NOTE: If you have nodelists with duplicate some of each others nodes, the nodelist with the newest or most correct entries should be placed LAST, and you should use the -D (remove duplicates) option with GoldNODE.

(yes)

If set to YES, GoldED+ will warn you during startup if one or more nodelists are missing. Use NO to disable the warning if it bothers you or you delete/pack your nodelists when the nodelists are compiled.

NOTE: GoldED+ can work fine with lookups etc. without nodelists as long as it can access its own indexes (GOLDNODE.GX?). Only the extra details will be missing.

This is where GoldED+ and GoldNODE finds the nodelist files and indexes.

Path where GoldED+ can find the FrontDoor nodelist index files.

Path to the InterMail nodelist index files. This is actually just an alias name of the NODEPATHFD keyword, since InterMail and FrontDoor uses the same nodelist index files.

Path where GoldED+ can find the Version 7 nodelist index files.

NOTE: For the Version 7 nodelist index support, GoldED+ *requires* that the files SYSOP.NDX, NODEX.NDX and NODEX.DAT are present. None of these files may be missing and no other filenames are supported. Multiple sets of index files are not supported.

The Version 7 nodelist index does not by default define any nodelist flags except the CM flag. Unfortunately the V7 index does not point to the actual nodelist, it only has some bits which are marked "reserved" in the specifications. The NODEV7FLAGS keyword allows you to define the meaning of each of these bits.

The <value> field can be a number or a bit number. Allowed numbers are: 32, 64, 128, 256, 512, 1024, 2048, 8192 and 16384. Allowed bit numbers are: b5, b6, b7, b8, b9, b10, b11, b13 and b14.

Example:

NODEV7FLAGS MO b5 NODEV7FLAGS LO b6 NODEV7FLAGS MN b7 NODEV7FLAGS NC b8 NODEV7FLAGS ZEC b9 NODEV7FLAGS REC b10 NODEV7FLAGS NEC b11 NODEV7FLAGS XA b13 NODEV7FLAGS XX b14

See also the NODEV7MODEM keyword for other nodelist flags.

The nodelist flag bits in the index files are put in by your Version 7 nodelist compiler. You must make sure that the nodelist flag definitions in your nodelist compiler setup match those in your GoldED+ setup.

The Version 7 nodelist index does not by default define any nodelist modem type flags. Unfortunately the V7 index does not point to the actual nodelist, it only has some bits which are marked "reserved" in the specifications. The NODEV7MODEM keyword allows you to define the meaning of each of these bits.

The <value> field can be a number or a bit number. Allowed numbers are: 1, 2, 4, 8, 16, 32, 64 and 128. Allowed bit numbers are: b0, b1, b2, b3, b4, b5, b6 and b7.

Example:

NODEV7MODEM VFC b0 NODEV7MODEM HST b1 NODEV7MODEM V34T b2 NODEV7MODEM V32B b3 NODEV7MODEM V34 b4 NODEV7MODEM V42B b5 NODEV7MODEM ZYX b6 NODEV7MODEM ISDN b7

See also the NODEV7FLAGS keyword for other nodelist flags.

The modem type bits in the index files are put in by your Version 7 nodelist compiler. You must make sure that the modem type definitions in your nodelist compiler setup match those in your GoldED+ setup.

Specifies the content of the RFC Organization header for Internet messages.

You can define many different origins for use in GoldED+. You can select one of the defined origins from the Origin selection menu (the READchangeorigin keyword), which is also available from the EDITMENU and the EDITSAVEMENU.

Leading and/or trailing spaces can be added by enclosing the origin string in quotes.

This keyword can be used globally and in a Random System group.

NOTE: Origins defined in the Random System will always override the global origins defined with this keyword, except when they are selected from the EDITSAVEMENU.

Defines a Binkley-style outbound path. Currently only used for WaZOO .REQ file requests (see FRQWAZOO). This should be the name of your primary outbound without extension.

This is the default name of the file written using the READwritemsg command.

This keyword can be used globally and in a Random System group.

Defines the default path where GoldED+ should look for the PCBoard setup files if it can't find the PCBOARD environment variable.

(0)

Specifies the lastread set used in the PCBoard message base.

Specifies options regarding the personal mail scan feature. None of them are enabled by default.

If the "startup" option is used, GoldED+ scans for personal mail while doing the startup mail scan.

If the "allnames" option is used, GoldED+ scans for mail to all the USERNAME's instead of only the first. The default is not to scan for personal mail at startup and to scan only for the first name. This is faster.

Example:

PERSONALMAIL Startup, AllNames

The example makes GoldED+ scan for personal mail to all your USERNAME's at startup.

See the EVENT keyword for a definition of the PLAY parameters.

This keyword can be used globally and in a Random System group.

(PRN)

Defines the name of the device used for printing. PRN is the default, but LPTx can also be used. Printers on COMx ports may also work, but this has not been tested.

Devices are opened in Write-Only text mode. The function has been successfully tested to work with two popular peer-to-peer network packages.

You should NOT use a filename as devicename. Use the filename option in the Write menu instead.

(yes)

Used when printing messages. If enabled, it prints a Form Feed (12d) character after each message.

This keyword defines the command string sent to your printer to initialize it before the actual printing.

The <printstring> can contain items like these:

$Hex A hexadecimal string. #Decimal A decimal (integer) number. "String" Text string, enclosed in double quotes. 'String' Text string, enclosed in single quotes. Other chars Ignored.

(60)

Defines the number of lines per page for printing. A formfeed is printed when every time PRINTLENGTH lines have been printed.

(80)

The right margin to use in printed messages.

This keyword defines the command string sent to your printer to reset it after printing.

<printstring> See the PRINTINIT keyword.

(no)

If enabled, GoldED+ will put the QUOTESTRING on blank lines in the quote. Otherwise blank lines are left blank in quotes.

If used, it sets the default filename for the quotebuffer. If no path is specified, the GOLDPATH is used.

This keyword can be used globally and in Random System groups.

NOTE: If this keyword is used in globally (in GOLDED.CFG), it effectively disables the automatically named quotebuffers, as described in the chapter about the QUOTEBUFMODE keyword.

(ask)

Specifies what GoldED+ should do, if the quotebuffer file exists already.

Ask A menu asks you to select append/overwrite/skip. Append Always append, no asking. Overwrite Always overwrite, no asking.

The "always overwrite" mode is not very useful I guess, but it's there if you need it.

The quotebuffer feature automatically creates special filenames for the buffer file, using these guidelines:

FORMAT FILENAME LOCATION Fido GOLDED.QBF In the directory with the *.MSG's. Hudson GOLDHxxx.QBF In the HUDSONPATH. Squish filename.QBF Where the Squish area is. Ezycom GLDxxxxx.QBF In the EZYCOMMSGPATH. JAM filename.QBF Where the JAM area is. Goldbase GOLDGxxx.QBF In the GOLDBASEPATH. PCBoard filename.QBF Where the PCBoard area is.

Note that they all have extension .QBF so that you can easily find them.

Defines up to 10 chars to recognize in addition to '>' as quote string chars. This is most useful in gated Internet newsgroups, where chars such as '|', ':' and ';' are sometimes used instead of the '>'.

This keyword can be used globally and in Random System groups.

Example:

Group Internet: Member alt.*, comp.*, net.email Quotechars "|:;" Username odinn@winboss.dk EndGroup

The example is similar to the one I use myself (net.email is a local netmail area where I import my gated e-mail from winboss.dk). The username is my actual Internet address.

Note that using additional quotechars such as '|' and ':' may cause odd results when quoting in the cases when they are actually NOT used in a message as quotechars. Consider for example quoting a smiley :-)

Specifies if you want quote tearline and/or origin in your messages.

This keyword can be used in random system groups.

(70)

The margin to which quotes are wrapped. A negative value means that the negative value is added to the DISPMARGIN (not recommended).

(no)

If enabled, GoldED+ will automatically add blank lines before and after a block of quoted text, if none are present already. This improves the readability of some messages.

(" FL> ")

With this keyword you define how you want the quotestring to look in your quoted replies.

The <quotespec> can contain these characters:

F Replaced with the first letter of the first name. M Replaced with the letters of the middle names. L Replaced with the first letter of the last name. > Required quote-char. Spaces Cosmetics.

Other characters are allowed but *not* recommended.

This keyword can be used globally and in Random System Groups.

(yes)

This keyword controls behaviour of quoted text (wrap or reflow).

Specifies the area where messages in unknown conferences are put. If you get messages tossed here by accident, you must move them manually to the correct area. If the badmsgs area is not defined, the messages will silently disappear. Messages tossed to the badmsgs area will have the control line "AREA:<bbsid>_<confno>" at the top of the message.

Defines the mapping between the BBSID and conference names in the QWK packets and the echoid name of the conference as required by GoldED+. You MUST define a mapping for every conference that you subscribe to. If you don't, the messages will be tossed to the area defined by QWKBADMSGS or disappear. The <bbsid> is the name listed on line 5 in CONTROL.DAT after the comma. The <confname> is the conference names listed on line 13 and on alternate lines onwards in CONTROL.DAT. If a conference name contains embedded spaces, the <confname> must be enclosed in double quotes, like this: "Main Board". The area <echoid> must be already defined either in an AREAFILE or using the AREADEF or AREA keywords.

Path where outgoing QWK reply files (BBSID.MSG) can be placed.

Path where incoming QWK packet files (CONTROL.DAT and MESSAGES.DAT) can be found.

The <bbsid> is the BBSID (same as the name of the QWK packet) for which the options will be active. The <options> can be any or a combination of the following, separated by commas or spaces:

KLUDGES/NOKLUDGES: Defaults to NOKLUDGES. Specifies whether or not to include the FidoNet-style kludges at the top of messages when exporting to QWK. NOTE: Unless you enable this option, GoldED+ will *not* include kludges in your QWK packets. You should check if the BBS supports kludges in QWK packets. If it does, please enable this option.

MIXCASE/NOMIXCASE: Defaults to NOMIXCASE. Specifies whether or not the BBS allows mixed upper/lower case in the QWK message headers. The default is to uppercase the TO and FROM header fields when exporting to QWK packets.

RECEIPT/NORECEIPT: Defaults to NORECEIPT. Specifies whether or not the BBS supports return receipt requests (RRQ). If the RECEIPT option is enabled, GoldED+ will insert "RRR" at the front of the subject field if the RRQ attribute is set on your messages, when exporting to QWK packets.

Commandline for a replylinker program to call after QWK import.

Name of a file where GoldED+ puts the echoids of each area where articles have been imported. The tosslog file is intended to be used with a replylinker. If no path is given, it defaults to the GOLDPATH.

(detect)

GoldED+ supports the two different formats of the Hudson USERS.BBS file. With this keyword you can tell GoldED+ which format to use.

If set to YES, the RA2 format is used. Otherwise if the it is set to NO, the Hudson format is used.

If this keyword is NOT used, GoldED+ tries to detect the format by looking at the size of the USERS.BBS file and comparing this to the record sizes of the RA2 and Hudson formats.

If the size matches one and not the other, the format is detected to be of the matching type.

If the size matches both (which is quite normal), GoldED+ looks for the RA environment variable and if found, in the RA config files for the RA version.

If the size does not match either of them (indicating a possibly damaged userfile), GoldED+ exits with an error message and writes in the log with details of the problem and an advise to run a userbase packing utility.

If used, this keyword should be placed in the configuration file _after_ any AREAFILE keyword.

(yes) If this keyword defined to "no" then GoldEd will recognize RRq (receipt request) and/or CFM (confirmation) flag on messages with RCV (received) flag set. After that RRq and CFM flags will be resetted. It is useful if your netmail tracker sets RCV flag before you actually read messages.

REGISTERNAME

These keywords do nothing and won't do anything in the future. They were used when GoldED+ was a Shareware product.

This keyword ignores everything behind it. This is useful to comment a single line out.

Defaults to "direct" for JAM and "chain" for everything else.

If set to "direct", GoldED+ will link your reply directly to the original message. If set to "chain", it will link to the last message in the reply chain. The default ("chain") is how GoldED+ has done it in all previous versions.

The advantage of the "direct" linking method is that you can easily find the the original message the reply was for. Unless of course you have later re-linked using a chain-linking replylinker utility. I can recommend the utility SQLINK by Serge Terekhov. SQLINK links Squish areas using the MSGID/REPLY kludges and makes direct links instead of chain-linking on the subject line like most other replylinkers do. There are probably also similar replylinkers for other msgbase formats, I just don't know them.

(fast)

When there is more than one reply to a msg in a JAM or Squish area, GoldED+ pops up a list of the replies. This keyword affects the contents of the list.

In the "fast" mode, the list data is based solely on what can be found by reading the message header, which is quite fast. Unfortunately some software does not (or cannot) fill the header with the correct origination address. In that case, set this keyword to "full", which makes GoldED+ read and scan each message for control data to get the origination address. That can be very slow.

A "robot" is a program on the Boss or Uplink system which responds automatically to netmail messages. Usually the robot links or unlinks echomail areas or distributed files.

The following ROBOTNAME's are defined by default:

AreaFix, AreaMgr, FileFix, AreaLink, AllFix, Raid, GEcho.

If you write a netmail message where the TO: name is one of the robot names, GoldED+ will ignore any template definition, and give you a blank msg (possibly with a tearline) to edit.

(180)

If non-zero, GoldED+ will blank the screen after the defined number of seconds, and put a small moving window up instead. Hitting any key (including shiftkeys) will return the screen to normal. If zero, no blanking is done.

If the additional parameter "BLACK" is given, GoldED+ will switch the screen completely black instead of showing its own animated screenblanker. This is useful if you have a monitor with powersaving-features.

Example:

SCREENBLANKER 300 BLACK

NOTE: This feature only works if KEYBMODE is set to "poll".

(0)

On some systems, GoldED+ may no detect the correct display size. With this keyword you can force a specific size. If zero, autodetect is used.

(0)

On some systems, GoldED+ may not detect the correct display size. With this keyword you can force a specific size. If zero, autodetect is used.

You can change the color palette used in GoldED+. The palette has 16 color registers, corresponding to the 16 colors from black (0) to intense white (15). By changing the values in the palette registers, it is possible to make any of the 16 colors a completely different color. You can even make the background colors intense, without using the intense color feature. There are 64 different colors to chose from.

To configure the palette colors in GoldED+, the SCREENPALETTE keyword is used. There are two different syntaxes:

SCREENPALETTE <reg> <value> SCREENPALETTE <reg> (red green blue)

So you can either compose the color value using separate red, green, blue components, or directly use a precalculated value. The red/green/blue values can only be in the range 0-3.

These are the original palette values:

SCREENPALETTE 0 (0 0 0) SCREENPALETTE 1 (0 0 2) SCREENPALETTE 2 (0 2 0) SCREENPALETTE 3 (0 2 2) SCREENPALETTE 4 (2 0 0) SCREENPALETTE 5 (2 0 2) SCREENPALETTE 6 (2 2 0) SCREENPALETTE 7 (2 2 2) SCREENPALETTE 8 (1 1 1) SCREENPALETTE 9 (1 1 3) SCREENPALETTE 10 (1 3 1) SCREENPALETTE 11 (1 3 3) SCREENPALETTE 12 (3 1 1) SCREENPALETTE 13 (3 1 3) SCREENPALETTE 14 (3 3 0) SCREENPALETTE 15 (3 3 3)

Copy these lines into your GOLDED.CFG and start experimenting! :-)

If you have written a program to edit the palette and write a GoldED+ palette setup file, please don't keep it a secret! :-)

(yes)

If enabled, all relevant windows and menus in GoldED+ will have shadows.

(Auto)

Use this to force GoldED+ to use either 25 lines, 43/50 lines on EGA/VGA, or even special videomodes supported by your SuperVGA adapter (modes like 132x44, 100x40 or 80x60).

The <mode> can be one of the following:

Auto Use detected size. 25 Switch to 25 lines. 28 Switch to 28 lines. 4350 Switch to 43/50 lines. Mode <NN> Switch to videomode NN (a hexadecimal value).

Please check your video adapter manual carefully before trying out the Mode option. SELECTING A WRONG MODE CAN DAMAGE YOUR MONITOR!!!

The Mode option is ignored in the W32 and OS/2 version.

(no)

If enabled, GoldED+ will use standard BIOS calls for screen updates. This is VERY slow, and should only be used if really needed. Normally GoldED+ uses direct screen writes.

This feature is only interpreted in the DOS version.

Defines a set of search strings, separated by the '|' character. The search set defined here is the default when using the Alt-F/Z search functions or the marking system.

The '|' character works like an OR operator. That is, the search is successful if one OR more of the strings are matched. The '&' character is used as the logical AND operator.

Please refer to appropriate section in user's guide for more information.

Older versions used the ';' semicolon character as a separator, but that conflicts with the config reader which treats the semicolon in a special way. The semicolon is still accepted as separator char like '|', but if semicolons are used, you MUST enclose the search strings with quotes or the config reader will treat the first semicolon as the start of a comment.

Examples:

SEARCHFOR string1 SEARCHFOR string1|string2|stringx SEARCHFOR "string1;string2;stringx" SEARCHFOR "string 1"|string2&stringx

This keyword can be used globally and in Random System groups.

This keyword defines "semaphore" files, for use with other mailer and/or mail processing software.

The <type> can be one of the following:

NETSCAN Empty netmail scan file (for D'Bridge/FD). ECHOSCAN Empty echomail scan file (for D'Bridge). EXPORTLIST Echoid-list of your new messages. IMPORTLIST Echoid-list of new imported messages.

The semaphore files are placed in the AREAPATH, if no path is specified.

See the example .CFG files for typical semaphore filenames.

NOTE: You should not set SEMAPHORE EXPORTLIST to %JAMPATH%\ECHOMAIL.JAM. This is incorrect and probably may cause your mail processor to malfunction. Use the JAMPATH keyword instead.

GoldED+ can handle enviroment variables correctly in paths specified in connection with this keyword. For example, if a path is defined as %MAIL%\path\name, and SET MAIL=C:\POINT is in AUTOEXEC.BAT (or whatever), then GoldED+ translates the path to C:\POINT\path\name.

NOTE: The translation is done at config compile time, so if you change the environment variable and haven't changed anything else that would cause GoldED+ to recompile it's config, you must force it with the -F or -FF command parameter.

In addition, GoldED+ itself can watch for some semaphore files and execute the appropiate function if it is in the arealist screen. This can be useful if you have a multitasking system and you want to "tell" GoldED+ that there is new mail in some areas and GoldED+ should update its display correctly.

In detail, there are

EXITNOW <file> Quit immediately. SCANALL <file> Scan all areas SCANNETMAIL <file> Scan all netmail areas SCANTHIS <file> Scan the areas listed in the file PMSCANALL <file> PM-scan all areas PMSCANNETMAIL <file> PM-scan all netmail areas PMSCANTHIS <file> PM-scan the areas listed in the file QWKIMPORT <file> Import QWK packets QWKEXPORT <file> Export to QWK SOUPIMPORT <file> Import SOUP packets SOUPEXPORT <file> Export to SOUP IDLETIME <seconds> Number of seconds between checks

If SEMAPHORE IDLETIME is defined and non-zero, then GoldED+ will check this list of semaphore files when the user has not pressed a key in the specified number of seconds. The semaphores are only checked when the arealist screen is active. If a semaphore file is found, the file is deleted and then the action is performed. If no path is given for the files, the GOLDPATH is assumed.

Example:

SEMAPHORE SCANALL SCANALL.NOW SEMAPHORE IDLETIME 30

This causes GoldED+ to check every 30 seconds for the SCANALL.NOW file in the GOLDPATH, and scan all areas if it's found.

Everything mentioned above about REGISTERKEY and REGISTERNAME applied to this keyword.

(yes)

If enabled, GoldED+ opens all files in a SHARE.EXE compatible mode.

The default share-mode is "Share Deny None", but another may be specified directly if you give the mode number as the keyword parameter (decimal).

It is normally not necessary to change the default.

(defaults to the GOLDPATH)

Tells GoldED+ where to find the sound files for the PLAY and EVENT keywords.

Specifies the area where "bad messages" from SOUP packets can be tossed. It should be an echomail or newsgroup area.

Specifies the area where Internet e-mails can be tossed. It must be a netmail or e-mail area.

(76)

This is the margin that GoldED+ will hard-wrap to when exporting to SOUP packets. If you're getting complaints that your lines are too long, you may want to set this to 70 or 60.

NOTE: You should NOT enable EDITHARDTERM in email and newsgroups that are exported to SOUP. If you do, your messages will probably be exported with short line "droppings" after the wrapping margin.

Path where outgoing SOUP reply packet files (REPLIES and GOLD*.MSG) can be placed.

Path where the incoming SOUP packet files (AREAS and *.MSG) can be found.

Name with full path of the NEWSRC file which lists the newsgroups you are connected to. GoldED+ uses the list to mark the matching areas as newsgroups. These will then be scanned for outgoing mail when starting a SOUP export.

Commandline for a replylinker program to call after SOUP import.

Internet-Address other users should use when they respond to your mails (Reply-To Headerline).

Name of a file where GoldED+ puts the echoids (newsgroup names) of each area where articles have been imported. The tosslog file is intended to be used with a replylinker. If no path is given, it defaults to the GOLDPATH.

(no)

If enabled, then in Squish areas, if the DIR (direct) attribute is set on a message, GoldED+ will automatically set both the CRA (crash) and HLD (hold) attributes when saving the message.

According to the Squish Developers Kit, this is the way to tell SquishMail that a message should be routed direct, because SquishMail does not recognize the FLAGS kludge where the DIR attribute is normally found. This keyword should probably only be used with SquishMail (the mail processor) and then only when used with Binkley or other so-called "static" mailers. DON'T use it with FrontDoor!

(quick)

Specfies whether to use a quick scanning method which only looks in the .SQI files. This will normally work fine, but may fail slightly in obscure cases, especially when used with Squish 1.0x or programs using the old version of the MSGAPI. If you suspect problems, try to set this keyword to "api", which tells GoldED+ to look in the .SQD file for an exact count of active msgs in the .SQI file.

NOTE: GoldED+ does NOT use the original MSGAPI by Scott Dudley. Since version 2.50, a completely rewritten implementation is used.

(0)

This sets the lastread index number for the Squish *.SQL lastread files. Lowest number is 0 (zero), highest is (in theory) 65534.

If used, this disables the use of USER.BBS to find the index number, and will in effect also stop GoldED+ from creating USER.BBS or any new entries in it (useful in a single-user point system). If a Squish msgbase is shared between several users, and you don't want to have a USER.BBS (recommended in such a case), each user must have a unique SQUISHUSERNO in their GOLDED/GOLDAREA.CFG.

This keyword defines the path where GoldED+ can find and use/create your USER.BBS file, which is used in connection with the Squish area lastreads. You can also specify the exact filename if not USER.BBS.

If this path or filename is not defined, GoldED+ will instead take the one specified with AREAFILE Squish or AREAFILE Maximus (whichever comes first), or failing that, use the MAXIMUS or SQUISH environment variables. If even that fails, the AREAPATH or GOLDPATH is used. If AREAFILE Maximus is used, GoldED+ gets the filename from MAX.PRM.

(yes)

If enabled, GoldED+ will display a clock in HH:MM:SS format in the right side of the statusline.

You can redefine the clock format with the language keyword ST_STATUSLINETIMEFMT in GOLDLANG.CFG. See the Language Definition chapter to details about the date/time codes you can use.

NOTE: The clock will only run continuously if KEYBMODE is set to "poll".

(no)

If set to YES, GoldED+ will replace the "logo" in the left side of the statusline with a text saying "F1 Help". This is for use in "point package" setups where the user may be a complete novice, maybe even to computers, and who needs to be guided to the help screens. The "F1 Help" text is configurable with the ST_STATUSLINEHELP language keyword (put it in GOLDLANG.CFG).

If set to NO, GoldED+ will display it's logo (name and version) in the left side of the statusline.

If set to NOLOGO, GoldED+ will not display anything in the left side. The middle part is extended to fill the space on the left side.

(hide)

If enabled (yes or hide), GoldED+ will highlight text surrounded by one of the following characters in a different color: '*' for bold text, '/' for italic text, '_' for underlined text and '#' for reversed text. These are commonly used "stylecodes" which add emphasis to the text, without making it harder to read. Examples: *This* will be shown in bold color, /this/ in italic color and _this_ in underlined color. It is also possible to combine styles, such as */this/*, in bolditalic color.

The differ in yes and hide is that hide strips surrounding stylecodes.

Described values are specific to -asa. Official vesions starting at 3.00beta3 has bug in implementation which causes GoldEd to ignore this keyword. Realization of this keyword in -asa versions compatible with official versions prior to 3.00beta3.

To define the highlight colors, use COLOR STYLECODE. See the color chapter for details.

(!\"$%&()+,.:;<=>@[\]^`{|}~) STYLECODESTOPS <"charlist">

("")

The STYLECODEPUNCT keyword specifies all the characters that punctuates words. The stylecode line parser scans forward until it meets one of these characters and then looks back to see if it found a word with stylecodes around it.

The STYLECODESTOPS keyword specifies characters which, if found within the word to be highlighted, causes the highlight to be cancelled.

These keywords were added to allow users to experiment with the characters for punctuation and stop for stylecode sequences. This is mostly to illustrate the point that it is almost impossible to make stylecodes work in every case you want without getting a lot of false highlights too. Please keep in mind that stylecodes are, and always will be, a primitive and very error-prone method for adding highlights to message text. The defaults are:

STYLECODEPUNCT !\"$%&()+,.:;<=>@[\]^`{|}~ STYLECODESTOPS

Note that the double-quote (") must have the backslash (\) in front of it - the sequence (\") is translated to a single (").

Defines one or more taglines. A tagline collection filename can be specified if prepended with an '@' character, like this: TAGLINE @TAGLINE.LST. If a tagline collection file is used, GoldED+ will create an index file for it the first time it is used or any time the file is edited. The index file has the same name, but extension ".SDX". The index file is an array of 32-bit long integers, containing the offset of each line in the tagline collection file.

This keyword can be used globally and in a Random System group.

Taglines defined in the Random System *always* overrides the default global taglines defined with this keyword.

('.')

Defines the character GoldED+ uses when putting a tagline in your message. The default is '.'. You should not change this default. GoldED+ itself only recognizes taglines with '.' or '_' (underscore).

(yes)

Allows you to turn off the internal tagline support, in case it turns out to be too buggy or if you want to use one of the many good external tagline utilties out there instead.

(@longpid)

Sets window title in Win32 and OS/2 versions, ignored in other.

(@longpid @version)

Here you can define your default tearline. The tearline can be up to 76 chars long (excluding the leading "--- "), but beware that policies (such as FidoNet ECHOPOL1) may set a significantly lower limit (around 30).

This keyword can be used globally and in a Random System group.

Tearlines defined in the Random System *always* overrides the default tearline defined with this keyword.

If your tearline does not contain at least the string "GoldED" or "GED", GoldED+ will automatically insert it's PID kludge. See also description of USEPID keyword.

(GOLDED.TPL)

You can define many different template files. The templates can be switched using the READchangetemplate (Ctrl-T) popup menu or the EDITMENU.

The optional "desc" can be used to give the templates more meaningful names like "International template" instead of non-obvious names like "GOLDED.TPL". If a description is used, it must appear before the match-address. It must always be enclosed in quotes, even if it is only one word.

The match-address is an address mask (wildcards allowed) which can be used to tell GoldED+ to select that template if the destination address on a message you write matches the match-address. The matching will only take place if the TEMPLATEMATCH keyword has been enabled.

This keyword can be used globally and in a Random System group. In Random System groups, only the <file> parameter can be used.

Templates defined in Random System groups always override the globally defined templates, except when selected from the EDITMENU or when automatic template matching is in effect.

To override the automatic template matching, start by selecting a template manually using the READchangetemplate (Ctrl-T) command or the EDITMENU.

Currently only one match-address per template can be specified, but you can specify several TEMPLATE keywords for the same file.

Example:

// Use DANSK.TPL for messages to Danish nodes/points. TEMPLATE DANSK.TPL "Danish" 2:23/* TEMPLATE DANSK.TPL "Danish" 2:234/* TEMPLATE DANSK.TPL "Danish" 2:235/* TEMPLATE DANSK.TPL "Danish" 2:236/* TEMPLATE DANSK.TPL "Danish" 2:237/* TEMPLATE DANSK.TPL "Danish" 2:238/*

// Use INTERNET.TPL for messages to the WinBoss gateway TEMPLATE INTERNET.TPL "Internet" 2:230/9316

// Use ENGLISH.TPL for messages to everywhere else TEMPLATE ENGLISH.TPL "English" *

(no)

If enabled, GoldED+ will select a template which matches the destination address on messages that you write. This keyword can be used globally or in random system groups.

(defaults to the GOLDPATH)

Defines the default path for msg templates. Use this if you want to place templates in a path separate from the GOLDPATH.

Defines the directory where temporary files are placed by GoldED+ and GoldNODE.

This path should *NOT* point to a RAM disk or other volatile media!

GoldNODE uses this path to store a temporary file which can become as large as the largest index file (GOLDNODE.GXN), so again, don't point it to a small RAM disk. If GoldNODE cannot find a TEMPPATH, it will use the NODEPATH instead.

(0)

Similar to the screen blanking (SCREENBLANKER) feature, GoldED+ can auto-exit after a specified period of time. Useful if you are in a hurry (or didn't get enough sleep last night ;-), and run GoldED+ from your mailer shell. The timeout value can be overridden with the -T commandline option.

NOTE: This feature only works if KEYBMODE is set to "poll".

(yes)

If set to YES, GoldED+ behaves as usual: It saves the (perhaps partially written) msg text in the internal editor to the msgbase and exits. If set to NO, GoldED+ will save the msg text in GOLDED.MSG just as if EDITAUTOSAVE function was in use and the power went out. Next time you started GoldED+ and entered a msg, it would detect the "lost" msg and ask you if it should be continued.

(yes)

If enabled then brief status will be added to title. (Win32 and OS/2 versions only)

(Blank)

In GoldED+ you can define several "Twit" names, addresses or subjects. With this keyword you can specify the action taken when a Twit message is encountered.

The <mode> can be one of the following:

Show Show twit messages. Blank Blank twit messages. Skip Skip twit messages, unless to your USERNAME's. Ignore Skip twit messages, always. Kill Deletes twit messages, *without* confirmation!

This keyword can be used globally and in a Random System group.

With this keyword, you can specify "Twit" names and/or addresses. When a Twit name/address is detected, the TWITMODE setting will determine the action taken.

With this keyword, you can specify "Twit" subjects. When a Twit subject is detected, the TWITMODE setting will determine the action taken. The subject string is searched in the entire subject text, so you can specify a partial twit subject. Twit subjects are limited to maximum 35 characters.

(no)

If enabled, GoldED+ will check both from- and to-names when checking for twitnames. By default only the from-names are checked.

This is a global keyword and won't work as intended if used in a random system group.

(yes)

If set to no then GoldEd will not generate @CHRS and @CHARSET kludges.

(yes)

If enabled, GoldED+ inserts the FLAGS kludge for certain extended attributes, as defined in FSC-0053 by Joaquim H. Homrighausen, and supported by FrontDoor, D'Bridge, IMail and other modern software. GoldED+ uses FLAGS to emulate the Hold and Freq attributes which are not defined in the Hudson message format.

(yes)

If enabled, GoldED+ inserts the FSC-0092 kludges introduced by the author of FleetStreet, Michael Hohner. These are

FWDFROM The original From-Name FWDORIG The original From-Aka FWDTO The original TO-Field FWDDEST The original TO-aka (only in netmails) FWDSUBJ The original subject FWDAREA The original areatag FWDMSGID The original MSGID (useful for reply-linking)

When forwarding, GoldED+ now adds these kludges, unless the original message already contains them, in which case they are preserved. When doing a normal reply (Alt-Q or Alt-R) to a message with the FWD kludges, GoldED+ replies to the forwarder. To reply to the from-name in the forwarded message, use the comment-reply function (Alt-G). If the message contains the FWDAREA kludge, you can reply to the forwarder in the original area (Alt-N) or reply to the from-name in the original area (Alt-B). Note that it is not possible to reply to the to-name of a message with the FWD kludges, and it is also not possible to reply to the to-name of the forwarded message (the FWDTO name).

(yes)

The INTL kludge is normally only inserted in netmail messages, if the origination zone is different from the destination zone (the "Auto" setting), but on systems with many AKA's in the mailer, it might be useful/necessary to add it ALWAYS (the "Yes" setting). The "No" option should never be used.

The <type> can be one of the following:

Auto Only insert in inter-zone netmail. Yes Always insert. Recommended and default. No Never insert.

(yes)

If enabled, the MSGID kludge is inserted in netmail and echomail, and the REPLY kludge is inserted when replying to a msg with a MSGID.

The MSGID kludge is defined in FidoNet document FTS-9.

(no if GoldEd mentioned in tearline, yes otherwise)

If disabled then @PID kludge will not be used in your messages regardless of tearline contents.

In addition to normal nodelist support, GoldED+ also supports the "FIDOUSER.LST" style userlist format. The default zone is defined by the first ADDRESS or AKA, but can be overridden by adding the zone number or a full address after the filename.

<file> Userlist file in FIDOUSER.LST format. [zone/addr] Default address for the userlist (if no zone info is present).

(GOLDED.LST)

GoldED+ can generate a list of all users in the current area. This keyword defines the default name of the FIDOUSER.LST style userlist output file generated with the READmakeuserlist command.

You can define many different names/aliases. When GoldED+ finds an un-received message to one of your USERNAME's, it is marked as received. Useful if you use alias names in some conferences. It is possible to change the current name using the READchangeusername popup menu.

For msgbase formats with an associated user database, GoldED+ uses the *first* defined USERNAME to look in the user database for which lastread record to use. If your name is not found, it is added and a new lastread record created.

Example:

USERNAME Odinn Sorensen, 2:236/77.999

This keyword can be used globally and in a Random System group.

(no)

Activates usage of TZUTC kludge in your messages. You should properly setup timezone information in your OS. For example, in DOS you should set environment variable TZ to something like this:

TZ=MSK-3MSD,M3.5.0/02:00,M10.5.0/03:00

This line valid for Moscow, Russia.

This option could be used in random system groups.

Specifies the path where files are placed when using the uudecode feature. Files are placed in current directory if a path is not specified.

The specified path *must* exist !

(no)

Hidden lines are "unknown" kludge lines. If enabled, hidden lines will be displayed (in a different color) when reading msgs.

A hidden line is defined as a line which has the FidoNet kludge char (^a, ASCII 1) as the first char and is not on the list of internally or user defined known kludges.

This keyword can be used globally and in a Random System group.

IMPORTANT NOTE:

In some conferences the hidden lines are used to give witty comment "between the lines" in the plain text, but generally it is considered a bad practice and should be avoided because it may cause severe technical problems if a witty comment in a hidden line happens to match a (perhaps experimentally) defined kludge somewhere. It should also be noted that hidden lines are not kept in their original places when used in the JAM msgbase. This is due to the way the JAM specification stores FidoNet kludges.

(no)

If enabled, known kludge lines will be displayed (in a different color) when reading msgs.

Known kludges are those defined internally in GoldED+ plus those defined with the KLUDGE keyword.

This keyword can be used globally and in a Random System group.

(yes)

This is an experimental feature. It is similar to the VIEWHIDDEN and VIEWKLUDGE keywords, but for quoted text. I implemented it because I was annoyed with the excessive quoting often seen in Internet newsgroups. When this keyword is set to NO, GoldED+ attempts to trim down the quotes so that only the first line of each quote block is shown. It is not always successful, sometimes the result is not so useful.

A key command has been added to supplement this feature: READtogglequote. Suggested key assignment: Ctrl-V. Example:

^V READtogglequote

Try it out if you are annoyed with excessive quotes.

This keyword can be used globally and in a Random System group.

This name is inserted in the TO: name field, when entering new messages (not replies) in echomail or local areas.

This keyword can be used globally and in a Random System group.

Defines the lastread set used in the WildCat! 4.x message base.

This keyword defines character set translation table files.

<importid> Charset import identifier. <exportid> Charset export identifier. <file> Charset translation table file.

See the Character Translation chapter for details.

This keyword defines escape sequence translation table files.

<importid> Escset import identifier. <exportid> Escset export identifier. <file> Escape sequence translation table file.

See the Character Translation chapter for details.

Defines the export charset for your messages. See the Character Translation chapter for details.

This keyword can be used globally and in a Random System group.

It can also be used in templates (the @xlatexport token).

(IBMPC)

Defines the local charset for your machine. See the Character Translation chapter for details.

This keyword can be used globally and in a Random System group.

(IBMPC)

Use this keyword to specify the actual physical charset in effect for text screen display. This was previously the hardcoded value IBMPC, corresponding to the IBM codepage 437 (or the nordic edition 865).

NOTE: All charset translation files must translate from and to the charset identified with the XLATLOCALSET keyword!

This is the path where GoldED+ tries to find the XLATCHARSET and XLATESCSET files.

(ask)

When writing a netmail message to a destination in another zone, you can either send the message directly (No) or via the local ZoneGate (Yes). You can also be consulted each time (Ask). GoldED+ won't ask if Cra or Hld attribute is set.

Obsolete Keywords

This is a list of keywords which were used in various older versions. These keywords are now obsolete, either because they have been renamed or replaced, or if they no longer have any function. Most of the keywords are still active and remapped to the new names.

To check if you have obsolete keywords in your setup, run GoldED+ with the -F -D commandline parameters. Then if you get a number of "Unknown keyword" warnings, you should replace the old keywords with the new ones or remove them.

Old keyword: New keyword:

AREAAUTOFREQ AREAFREQTO AREABADMSGS SOUPBADMSGS AREASORT AREALISTSORT ASSIGNTO MEMBER AUTOATTACH EDITAUTOATTACH BEEPFACTOR (removed) BLANKTIME SCREENBLANKER BOARDNOS (removed) CCATTRIB ATTRIBSCC CCLIST CARBONCOPYLIST CFMATTRIB ATTRIBSCFM CHANGEDATE EDITCHANGEDATE CHANGEPROMPT (removed) CHARSET XLATCHARSET CLEARKEYS (removed) COLOUR COLOR COMMENTNOISE BEEPCOMMENT COOKIEFILE (removed) CRLFTERM EDITCRLFTERM DELORIG ASKDELORIG DISPMSGLIST MSGLISTFIRST DISPMSGLISTFAST MSGLISTFAST DISPSTYLECODES STYLECODES DOSSWAP (removed) ECHOATTRIB ATTRIBSECHO ECHOINFO CTRLINFOECHO EDITMARGIN (removed) EDITORVERSION (removed) ELIMSNOW (removed) ESCSET XLATESCSET EXCLAREA AREAEXCL EXPORTCHARSET XLATEXPORT EXTKEYS (removed) FIDOLASTREADNO FIDOUSERNO FIELDCLEAR EDITFIELDCLEAR FILECHECK (removed) FILECHECKALL (removed) FREEAREA (removed) FREETEAR (removed) GOLDEDCFM CONFIRMFILE GOLDEDLOG LOGFILE GOLDEDLST USERLISTFILE GOLDEDMSG EDITORFILE GOLDEDNAM NAMESFILE GOLDEDPRN OUTPUTFILE GOLDHELP (no longer documented) GOLDKEYS (no longer documented) GOLDLANG (no longer documented) GOLDRAND (no longer documented) GOLDXLAT (no longer documented) HARDLINE EDITHARDLINE HARDLINES EDITHARDLINES HWMARKS (removed) INCLAREA AREAINCL INTERNALEDITOR EDITINTERNAL LASTREAD FIDOLASTREAD LASTREADUSER FIDOUSERNO LISTWRAP (removed) LOCALATTRIB ATTRIBSLOCAL LOCALCHARSET XLATIMPORT LOCALHIGHLIGHT (removed) LOCALINFO CTRLINFOLOCAL LOCALNOISE (removed) MAPDRIVE MAPPATH MATCHAKA AKAMATCH MAXCOLS SCREENMAXCOL MAXMSGSIZE (removed) EDITMSGSIZE (removed) MAXROWS SCREENMAXROW MIXCASE EDITMIXCASE MULTIQBBS (removed) NETATTRIB ATTRIBSNET NETINFO CTRLINFONET NETTEAR CTRLINFONET performs similar function NEXTAREA AREANEXT NEXTMSGS (removed) NODELISTPAGEBAR (removed) NOISEFACTOR (removed) OVERLAY (removed) OVERLAYEMS (removed) OVERLAYEXT (removed) PAGEBAR (removed) QBBSINCRESCAN (removed) QBBSPATH HUDSONPATH QBBSREBUILD (removed) QBBSSCAN (removed) QMSGPATH HUDSONPATH REALMSGNO (removed) REBUILD (removed) RENAREA AREARENAME REPLYRE EDITREPLYRE RIGHTMARGIN DISPMARGIN SAVEMENU EDITSAVEMENU SAVETIME EDITAUTOSAVE SAYBIBI (removed) SCANAREA AREASCAN SCREENELIMSNOW (removed) SCREENUSEANSI (removed) SHADOWS (removed) SHARE SHAREMODE SHOWTWITS TWITMODE SIGNALFILE SEMAPHORE SOUNDDEVICE (removed) SPACEQUOTES (removed) SPELLCHECKER EDITSPELLCHECK STACKKEYS KEYBSTACK STARTECHO AREASTART SWAPALL (removed) SYSOP USERNAME TABSIZE DISPTABSIZE TAGLINEFILE (removed) TIMESLICE (removed) TIMEZONEOFFSET USETZUTC performs similar function UNDELETELINES EDITUNDELETE USEBIOS SCREENUSEBIOS XPLIST CROSSPOSTLIST

Location Dependent Configuration Keywords

The following configuration keywords are location dependent and should be placed in a particular order in the configuration file(s). Keywords that are *not* listed can be placed anywhere you want.

The keywords are listed in groups of those that depend on each other. They are listed in the recommended order within each group. The order between the groups is not important, with one noted exception.

Name/Address/Areas: USERNAME ADDRESS AKA ATTRIBSNET Specifies default attributes for AREAFILE etc. ATTRIBSECHO As above. ATTRIBSLOCAL As above. FIDOMSGTYPE PCBOARDPATH Recommended if you use PCBoard. MAPPATH AREARENAME Rename occurs before AREAEXCL/INCL. AREAEXCL AREAINCL AREAISEMAIL AREAISNEWS AREAPATH Default path for the AREAFILE's. AREAFILE RA2USERSBBS Overrides AREAFILE RemoteAccess. AREADESC Add description and more to some AREAFILE's. AREA Overrides areas in AREAFILE's. AREADEF As above.

Paths: GOLDPATH TEMPPATH MUST be in GOLDED.CFG. Used only by GoldNODE.

Nodelists: MUST be below ADDRESS/AKA and ONLY in GOLDED.CFG! NODEPATH NODELIST USERLIST EXCLUDENODES Remember to replace "ALL" with '*'. INCLUDENODES As above.

Colors: INTENSECOLORS Selects a default intense colorset if enabled. COLORSET Selects a default colorset. COLOR

External utils: EXTERNOPTIONS EXTERNUTIL

Character translation: XLATPATH XLATCHARSET XLATESCSET

Random System: GROUP Starts a group. MEMBER Defines areas that are members of the group. <Group Items> See the Random System chapter for a list. ENDGROUP Ends a group.

Message Attributes Reference

This is a list and description of all message attributes that are supported by GoldED+ in the keywords that accept attribute settings or can be displayed in the header.

A/S Archive/sent. ARQ Audit request. ATT File attached. CFM Confirmation receipt requested. COV Fax cover letter. CRA Crash - high priority mail. DEL Deleted. DIR Direct. Don't route this message. FAX Fax image attached. FRQ File request. GRP Group message. HIR Fax hi-resolution image. HLD Hold for pickup. HUB Host- or Hub-route message. IMM Immediate - Send message NOW! K/S Kill/sent. Delete message automatically after it is sent. KFS Kill/file/sent. Delete attached files after they are sent. LET Fax letterhead. LOC Local. Message was written on your system. LOK Lock. Prevents send/delete/purge/editing. ORP Orphan. Could not be sent because destination node is unknown. PRN Msg has been printed. Specific for Squish (bitvalue 00040000h). PVT Private. Message may only be read by the addressee and author. R/O Read only. Used in area definitions to prevent writing. RCV Received. Read by the addressee. RRC Return receipt. RRQ Return receipt requested. RSV FTS-1 reserved (unused) attribute. SIG Fax signature. SNT Sent. Message has been sent or exported from the msgbase. TFS Truncate/file/sent. Truncate files to zero length when sent. TRS Transit. Message passing through, not for you. UNS Unsent message. URQ Update file request. XMA Xmail. Attach does not conform to the ARCmail 0.60 standard. ZON Zonegate. Route through zonegate if possible.

Area Configuration

GoldED offers a wide variety of methods for defining message areas. You can define each area manually in the GOLDED.CFG file (or an INCLUDE'ed GOLDAREA.CFG file), or you can tell GoldED+ to read the area setup files of many popular BBS/mailer/mail processor packages.

For manual definition of areas, use the AREA or AREADEF (recommened) keywords.

For external area configuration, the general syntax for the AREAFILE keyword is:

AREAFILE <programname> [path or filename(s)] [-options]

Available options:

-S<sortspec>

If you are *not* using the global AREALISTSORT keyword for sorting all the areas, you can sort the areas of each AREAFILE separately. See the AREALISTSORT keyword for the definition of <sortspec>.

If no path is specified, the appropriate environment variable or the AREAPATH is used to find the files.

The <programname> can be one of the following: