From bbaa8d950ff5ae0396fe5ad6b13a1e5e6007f51d Mon Sep 17 00:00:00 2001 From: Michiel Broek Date: Sat, 11 May 2002 20:10:36 +0000 Subject: [PATCH] Updated docs --- Makefile | 2 +- README.isdn | 97 --------------------------------------------- html/faq.html | 107 ++++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 108 insertions(+), 98 deletions(-) delete mode 100644 README.isdn diff --git a/Makefile b/Makefile index 001bc25c..2df834e6 100644 --- a/Makefile +++ b/Makefile @@ -5,7 +5,7 @@ include Makefile.global OTHER = AUTHORS ChangeLog COPYING DEBUG CRON.sh FILE_ID.DIZ.in \ INSTALL.in Makefile Makefile.global.in NEWS \ - README README.GoldED README.isdn SETUP.sh TODO UPGRADE \ + README README.GoldED SETUP.sh TODO UPGRADE \ aclocal.m4 \ checkbasic config.h.in configure configure.in TARFILE = ${PACKAGE}-${VERSION}.tar.gz diff --git a/README.isdn b/README.isdn deleted file mode 100644 index 10ef92d6..00000000 --- a/README.isdn +++ /dev/null @@ -1,97 +0,0 @@ -$Id$ - -How to set up MBSE for ISDN. (J. Beekhuizen, 2:280/1018) - - -Of course, you have to configure and build your kernel for ISDN support -and the correct drivers for your card. It is beyond the scope of this -document to explain how to do that. - -To your /etc/inittab file add the following lines for your ISDN devices -ttyI0 and ttyI1. - - # ISDN lines - I1:23:respawn:/usr/local/sbin/mgetty -x 4 -i /opt/mbse/etc/issue ttyI0 - I2:23:respawn:/usr/local/sbin/mgetty -x 4 -i /opt/mbse/etc/issue ttyI1 - - -To your mgetty.config file [/usr/local/etc/mgetty_sendfax/mgetty.config -on my system] set up the ttyI0 and ttyI1 ports. With AT&E you set the -MSN/EAZ the device should listen to. This should for an MSN be your -telephone number _with_ the area code but _without_ the leading 0. For -an EAZ the last digit of your EAZ. - - # The ISDN ports - - port ttyI0 - modem-type data - init-chat "" ATZ OK AT&E714015437&W0 OK AT&B512 OK - - port ttyI1 - modem-type data - init-chat "" ATZ OK AT&E714017198&W0 OK AT&B512 OK - - -From the mbsetup menu #5 "Edit Modem types" configure the ISDN modem -type. - - Modem type ISDN Linux - Init string ATZ\r - Init string - Init string - OK string OK - Hangup \d\p\p\p+++\d\p\p\pATH0\r - Info command ATI2\r - Dial command ATD\T\r - Connect CONNECT 64000 - Connect CONNECT - [...] - Reset cmd ATZ\r - Error string BUSY - Error string NO CARRIER - Error string NO DIALTONE - Error string NO ANSWER - Error string RING\r - Error string ERROR - Error string - Error string - Error string - Error string - Cost offset 0 - EMSI speed 28800 ! not relevant for ISDN - Strip dashes No - Available Yes - - -And from #6 "Edit TTY lines info" the ISDN lines - - TTY name ISDN Line 1 - Device name ttyI0 - Phone or DNS 31-71-4015437 - Line speed 64 kbits - Fido flags CM,XA,MO,X75 - Equipment ISDN - Available Yes - Auth. log No - Honor ZMH Yes - Callout Yes - Modem type ISDN Linux - Locked speed 0 ! not relevant for ISDN - EMSI name The Wizard's ISDN line 1 - - TTY name ISDN Line 2 - Device name ttyI1 - Phone or DNS 31-71-4017198 - Line speed 64 kbits - Fido flags CM,XA,MO,X75 - Equipment ISDN - Available Yes - Auth. log No - Honor ZMH Yes - Callout Yes - Modem type ISDN Linux - Locked speed 0 - EMSI name The Wizard's ISDN line 2 - - -T-t-that's all folks :)) diff --git a/html/faq.html b/html/faq.html index a5f4f753..04c6e602 100644 --- a/html/faq.html +++ b/html/faq.html @@ -55,6 +55,7 @@
  • BBS Setup
    1. How do I run DOS doors under MBSE BBS?
      2. +
    2. How to set up MBSE for ISDN.
    @@ -587,6 +588,112 @@ And that is everything... Up

    + + +
    Q 4.2 +How to set up MBSE for ISDN. +
    A 4.2 +Contributed by: J. Beekhuizen, 2:280/1018 +

    +Of course, you have to configure and build your kernel for ISDN support +and the correct drivers for your card. It is beyond the scope of this +document to explain how to do that. +

    +To your /etc/inittab file add the following lines for your ISDN devices +ttyI0 and ttyI1. +

    +# ISDN lines
+I1:23:respawn:/usr/local/sbin/mgetty -x 4 -i /opt/mbse/etc/issue ttyI0
+I2:23:respawn:/usr/local/sbin/mgetty -x 4 -i /opt/mbse/etc/issue ttyI1
+
+
    +To your mgetty.config file +[/usr/local/etc/mgetty_sendfax/mgetty.config on my system] +set up the ttyI0 and ttyI1 ports. With AT&E you set the +MSN/EAZ the device should listen to. This should for an MSN be +your telephone number with the area code but +without the leading 0. For an EAZ the last digit of your EAZ. +

    +The ISDN ports +

    +port ttyI0
+modem-type data
+init-chat "" ATZ OK AT&E714015437&W0 OK AT&B512 OK
+
+port ttyI1
+modem-type data
+init-chat "" ATZ OK AT&E714017198&W0 OK AT&B512 OK
+
+
    +From the mbsetup menu #5 "Edit Modem types" configure the ISDN modem +type. +
    +
+Modem type   ISDN Linux
+Init string  ATZ\r
+Init string  
+Init string  
+OK string    OK
+Hangup       \d\p\p\p+++\d\p\p\pATH0\r
+Info command ATI2\r
+Dial command ATD\T\r
+Connect      CONNECT 64000
+Connect      CONNECT
+[...]
+Reset cmd    ATZ\r
+Error string BUSY
+Error string NO CARRIER
+Error string NO DIALTONE
+Error string NO ANSWER
+Error string RING\r
+Error string ERROR
+Error string 
+Error string 
+Error string 
+Error string 
+Cost offset  0
+EMSI speed   28800                   ! not relevant for ISDN  
+Strip dashes No 
+Available    Yes
+
+
    +And from #6 "Edit TTY lines info" the ISDN lines +
    +
+TTY name     ISDN Line 1
+Device name  ttyI0
+Phone or DNS 31-71-4015437
+Line speed   64 kbits
+Fido flags   CM,XA,MO,X75
+Equipment    ISDN   
+Available    Yes
+Auth. log    No 
+Honor ZMH    Yes
+Callout      Yes
+Modem type   ISDN Linux
+Locked speed 0                                 ! not relevant for ISDN
+EMSI name    The Wizard's ISDN line 1
+
+TTY name     ISDN Line 2
+Device name  ttyI1
+Phone or DNS 31-71-4017198
+Line speed   64 kbits
+Fido flags   CM,XA,MO,X75
+Equipment    ISDN   
+Available    Yes
+Auth. log    No 
+Honor ZMH    Yes
+Callout      Yes
+Modem type   ISDN Linux
+Locked speed 0
+EMSI name    The Wizard's ISDN line 2
+
+
    +T-t-that's all folks :)) +
    +Up +

    +