/*****************************************************************************/ /* */ /* The Blue Wave Offline Mail System Packet Structures */ /* Copyright 1990-1995 by Cutting Edge Computing. All rights reserved. */ /* Created by George Hatchew */ /* */ /* Version 3 - November 30, 1995 */ /* */ /* --------------------------------------------------------- */ /* DISTRIBUTION OF THIS FILE IS LIMITED BY THE TERMS */ /* SPECIFIED IN THE BLUE WAVE STRUCTURE DOCUMENTATION! */ /* --------------------------------------------------------- */ /* */ /* These data structures should be usable with any C compiler that */ /* supports the 1989 ANSI/ISO C language standard. They are NOT */ /* guaranteed to be usable with older compilers, which largely relied */ /* on the definition of the language as specified in Kernighan & Ritchie's */ /* _The C Programming Language (1st Edition)_. */ /* */ /*****************************************************************************/ #ifndef __BLUEWAVE_H /* An extra safeguard to prevent this header from */ #define __BLUEWAVE_H /* being included twice in the same source file */ #define PACKET_LEVEL 3 /* The current mail packet revision level, */ /* used in the "ver" field of the *.INF */ /* file header. */ /* ** This header defines the data structures for the following files in the ** official Blue Wave offline mail specification: ** ** Door: *.INF BBS and message area information ** *.MIX Quick index to *.FTI records ** *.FTI Information for all packet messages ** *.DAT Packet message text ** ** Reader: *.NET NetMail reply message information ** *.UPI Information for all other reply messages ** *.UPL Reply message information ** (alternative to *.NET and *.UPI) ** *.REQ List of files to download from BBS ** *.PDQ Offline door configuration information ** (packet version 2 and earlier) ** *.OLC Offline door configuration information ** (packet version 3 and later) ** ** Misc: *.MSG Fido-style message header ** (used *only* in the *.NET structure) ** *.XTI Extended message packet information ** (not an official part of the Blue Wave ** packet specification; is used by the Blue ** Wave reader only) ** ** The door files (plus individual files for BBS bulletins) comprise a Blue ** Wave message packet, and the reader files (plus individual files for each ** message) comprise a Blue Wave reply packet. ** ** In order to cover ALL BASES, and to be able to say that you were warned, ** *ALL* unused fields should be set to ASCII NUL (0). Any future ** implementation of reserved fields will rely on the premise that the field ** will be 0 if not implemented! The same warning follows for BITMAPPED ** fields. If a bit is not implemented or is not used, TURN IT OFF (0). ** (Clearing an entire structure can be easily accomplished via the memset() ** function. Example: "memset(&ftirec, 0, sizeof(FTI_REC))".) */ /*****************************************************************************/ /* >>>>>>>>>>>>>>>>>>>>>>> DATA TYPE DEFINITIONS <<<<<<<<<<<<<<<<<<<<<<<<< */ /*****************************************************************************/ /* ** The data type definitions below help make these structures a little more ** universal between environments. The 8-bit, 16-bit, and 32-bit data types ** defined below can be used as-is with virtually all MS-DOS and OS/2 C/C++ ** compilers, but can be changed if necessary should your compiler define ** data types in a different fashion. (Note that the tCHAR and tINT types ** are currently not used; they are included simply for completeness.) ** ** If you are programming for a system that employs a CPU which stores multi- ** byte integers in a manner other than in Intel format (LSB-MSB, or "little ** endian"), simply #define BIG_ENDIAN before #including this header. As ** shown below, this will define the data types as arrays of bytes; the ** drawback is that *YOU* will have to write functions to convert the data, ** since the Blue Wave packet specification requires the data to be in Intel- ** style little-endian format. ** ** IMPORTANT NOTE ABOUT COMPILERS AND STRUCTURES: ** All structures *must* be "packed" (i.e., the compiler MUST NOT insert ** padding bytes between structure elements in order to force elements onto ** word boundaries). The Blue Wave products expect them to be packed; if ** they aren't, you're bound to get some *very* interesting results. */ //#ifdef BIG_ENDIAN //typedef signed char tCHAR; /* 8 bit signed values */ //typedef unsigned char tBYTE; /* 8 bit unsigned values */ //typedef unsigned char tINT[2]; /* little-endian 16 bit signed */ //typedef unsigned char tWORD[2]; /* little-endian 16 bit unsigned */ //typedef unsigned char tLONG[4]; /* little-endian 32 bit signed */ //typedef unsigned char tDWORD[4]; /* little-endian 32 bit unsigned */ //#else typedef signed char tCHAR; /* 8 bit signed values */ typedef unsigned char tBYTE; /* 8 bit unsigned values */ typedef signed short tINT; /* 16 bit signed values */ typedef unsigned short tWORD; /* 16 bit unsigned values */ typedef signed long tLONG; /* 32 bit signed values */ typedef unsigned long tDWORD; /* 32 bit unsigned values */ //#endif /*****************************************************************************/ /* >>>>>>>>>>>>>>>>>>>>> DOOR DATA FILE STRUCTURES <<<<<<<<<<<<<<<<<<<<<<< */ /*****************************************************************************/ /* ** Name of file: *.INF ** ** Description: The *.INF file is the source of information for just about ** everything from the host BBS, as well as definitions for ** all of the message areas that are available to the user ** and their status (Local, EchoMail, NetMail, Read Only, ** etc.). ** ** File format: INF_HEADER { only included one time! } ** INF_AREA_INFO { repeated for as many msg bases } ** INF_AREA_INFO { as are available to the user } ** ... */ /* Bit-masks for INF_HEADER.UFLAGS field */ #define INF_HOTKEYS 0x0001 /* User uses "hotkeys" in door prompts */ #define INF_XPERT 0x0002 /* Short menus displayed in door */ #define INF_RES1 0x0004 /* RESERVED -- DO NOT USE! */ #define INF_GRAPHICS 0x0008 /* Enable ANSI control sequences in door */ #define INF_NOT_MY_MAIL 0x0010 /* Do not bundle mail from user */ #define INF_EXT_INFO 0x0020 /* Download extended info with messages */ /* (* VERSION 3 AND LATER ONLY *) */ #define INF_NUMERIC_EXT 0x0040 /* Use numeric extensions on packets */ /* (* VERSION 3 AND LATER ONLY *) */ /* Bit-masks for INF_HEADER.NETMAIL_FLAGS field */ #define INF_CAN_CRASH 0x0002 /* Allow Crash status */ #define INF_CAN_ATTACH 0x0010 /* Allow File Attach messages */ #define INF_CAN_KSENT 0x0080 /* Allow Kill/Sent status */ #define INF_CAN_HOLD 0x0200 /* Allow Hold status */ #define INF_CAN_IMM 0x0400 /* Allow Immediate status */ #define INF_CAN_FREQ 0x0800 /* Allow File Request messages */ #define INF_CAN_DIRECT 0x1000 /* Allow Direct status */ /* Bit-masks for INF_HEADER.CTRL_FLAGS field */ #define INF_NO_CONFIG 0x0001 /* Do not allow offline configuration */ #define INF_NO_FREQ 0x0002 /* Do not allow file requesting */ /* Values for INF_HEADER.FILE_LIST_TYPE field */ #define INF_FLIST_NONE 0 /* Door does not generate a list file */ #define INF_FLIST_TEXT 1 /* Door generates plain text list file */ #define INF_FLIST_ANSI 2 /* Door generates ANSI list file */ typedef struct /* INF_HEADER */ { tBYTE ver; /* Packet version type (currently 2) */ tBYTE readerfiles[5][13]; /* Files to be displayed by reader */ tBYTE regnum[9]; /* User's registration number */ tBYTE mashtype; /* Currently unused (door fills with 0) */ /* Reserved for Blue Wave reader to store */ /* the compression type the packet uses. */ tBYTE loginname[43]; /* Name user types at BBS login */ tBYTE aliasname[43]; /* User's "other" name */ tBYTE password[21]; /* Password */ /* All bytes should be the actually ASCII */ /* value plus 10. Lame security, yes, */ /* but it does prevent "TYPE *.INF" from */ /* showing the password. */ tBYTE passtype; /* Password type */ /* 0=none 1=door 2=reader 3=both */ tWORD zone; /* Main network address of host BBS */ tWORD net; /* (zone:net/node.point) */ tWORD node; tWORD point; tBYTE sysop[41]; /* Name of SysOp of host BBS */ tWORD ctrl_flags; /* Flags to control reader capabilities */ /* (* VERSION 3 AND LATER ONLY *) */ tBYTE systemname[65]; /* Name of host BBS */ tBYTE maxfreqs; /* Max number of file requests allowed */ tWORD is_QWK; /* Whether *.INF belongs to a QWK packet */ tBYTE obsolete2[4]; /* OBSOLETE -- DO NOT USE! */ tWORD uflags; /* Bit-mapped door options/toggles */ tBYTE keywords[10][21]; /* User's entire set of door keywords */ tBYTE filters[10][21]; /* User's entire set of door filters */ tBYTE macros[3][80]; /* User's door bundling command macros */ tWORD netmail_flags; /* Bit-mapped NetMail options */ tWORD credits; /* NetMail credits */ tWORD debits; /* NetMail debits */ tBYTE can_forward; /* 0=Message forwarding not allowed */ tWORD inf_header_len; /* Size of INF_HEADER structure */ tWORD inf_areainfo_len; /* Size of INF_AREA_INFO structure */ tWORD mix_structlen; /* Size of MIX_REC structure */ tWORD fti_structlen; /* Size of FTI_REC structure */ tBYTE uses_upl_file; /* If this field is not zero, the door that */ /* created this packet can receive reply */ /* packets in the new *.UPL file format. */ /* Otherwise, the old *.UPI and *.NET */ /* files must be used. */ tBYTE from_to_len; /* The maximum length of the FROM: and TO: */ /* fields that the host BBS can support. */ /* If this value is 0 or is greater than */ /* 35, then 35 must be used (the upload */ /* file formats only allow for a maximum */ /* of 35 characters). */ tBYTE subject_len; /* The maximum length of the SUBJECT: field */ /* that the host BBS can support. If */ /* this value is 0 or is greater than 71, */ /* then 71 must be used (the upload file */ /* formats only allow for a maximum of 71 */ /* characters). */ tBYTE packet_id[9]; /* Original root name of the mail packet, */ /* as specified by the mail door. All */ /* files in the packet that are created */ /* by the mail door will use this root */ /* name, as will the reader when creating */ /* the upload files. Thus, even if the */ /* packets themselves are renamed to */ /* something completely different, the */ /* mail doors and readers will still be */ /* able to work with the proper files. */ tBYTE file_list_type; /* New file listing type */ /* (* VERSION 3 AND LATER ONLY *) */ /* Specifies the type of new file list */ /* that is generated by the door (see */ /* INF_FLIST_xxx, above). This field is */ /* intended for use with offline config. */ tBYTE auto_macro[3]; /* Auto-macro indicator flags */ /* (* VERSION 3 AND LATER ONLY *) */ /* Specifies which macros are auto macros */ /* (i.e. execute automatically after mail */ /* is scanned). */ tINT max_packet_size; /* Maximum size of uncompressed packet */ /* (* VERSION 3 AND LATER ONLY *) */ /* Specifies, in K, the maximum size of */ /* an uncompressed mail packet. A value */ /* of 0 indicates no maximum length. */ /* This field is intended for use with */ /* offline config. */ tBYTE reserved[228]; /* RESERVED FOR FUTURE USE */ /* This field MUST be filled with ASCII */ /* NUL (0x00) characters in order for */ /* future additional features to work */ /* properly! */ } INF_HEADER; /* ** Notes about the INF_HEADER.XXXXX_LEN fields, above: ** ** Door authors should take the few extra lines of code to fill in the ** structure lengths defined above. Doing so will make the Blue Wave data ** structures extensible and adaptable to almost any kind of file change that ** may be required in the future. The readers that use this mail packet ** format should contain code to handle a structure length that is longer or ** shorter than they expect. ** ** Reader authors need to take the time to code for possible extensions to ** this file format. If the data fields are LONGER than expected, simply do ** a seek to move to the next record, and ignore the extra information. If ** the data fields are SHORTER than expected, a simple "Please upgrade your ** reader" should suffice. However, you should never encounter a ** record size smaller than the ones defined here. Any extra information ** that is sent in the packets probably would not be crucial, and you may be ** able to continue with reading the packet anyway. ** ** It should be noted that all current Blue Wave doors set these fields to 0, ** as this extensibility was not added until recently. If the structure ** sizes are 0, the reader will assume that all records are of the sizes ** defined here. (Blue Wave readers below version 2.10 do NOT allow for ** extensible data files. Version 2.10, and all subsequent versions, WILL ** handle them properly.) DO NOT EXTEND THESE STRUCTURE FORMATS WITHOUT ** NOTIFYING CUTTING EDGE COMPUTING FIRST! If the extended information will ** benefit programs/users, it will be officially added to the packet format. ** ** The original values for the INF_HEADER.XXXXX_LEN structures are as below, ** defined as macros which you can use in your programs. Remember, if the ** value in INF_HEADER.XXXXX_LEN is 0, you must use these values instead! */ #define ORIGINAL_INF_HEADER_LEN 1230 /* Original *.INF header len */ #define ORIGINAL_INF_AREA_LEN 80 /* Original *.INF area rec len */ #define ORIGINAL_MIX_STRUCT_LEN 14 /* Original *.MIX record len */ #define ORIGINAL_FTI_STRUCT_LEN 186 /* Original *.FTI record len */ /* ** Below is some sample C code for reading in the variable length *.INF ** structure, which is the most "difficult" one to do. Note the sections of ** code which use the ORIGINAL_XXXXX_LEN macros; these are the sections that ** determine the proper structure length. (Comments are preceeded by "#" ** signs, since using C comment symbols would make most compilers think that ** nested comments are in use, a practice which normally is not allowed.) ** ** int read_inf_file(void) ** { ** INF_HEADER inf_header; ** INF_AREA_INFO inf_info; ** FILE *inf_file=NULL; ** tWORD record_num=0u; ** tWORD inf_header_slen, inf_area_slen; ** tLONG seek_pos=0L; ** ** inf_file = fopen("WILDBLUE.INF", "rb"); ** if (inf_file == NULL) ** return 0; ** ** fread(&inf_header, sizeof(INF_HEADER), 1, inf_file); ** puts(inf_header.loginname); ** puts(inf_header.aliasname); ** ** # Test and verify the validity of the structure lengths. ** ** if (inf_header.inf_header_len < ORIGINAL_INF_HEADER_LEN) ** inf_header_slen = ORIGINAL_INF_HEADER_LEN; ** else ** inf_header_slen = inf_header.inf_header_len; ** ** if (inf_header.inf_areainfo_len < ORIGINAL_INF_AREA_LEN) ** inf_area_slen = ORIGINAL_INF_AREA_LEN; ** else ** inf_area_slen = inf_header.inf_areainfo_len; ** ** # now, move to the END of the header, since it may be longer ** # than we expect it to be. Use fseek()... ** ** fseek(inf_file, (long)inf_header_slen, SEEK_SET); ** ** record_num = 0U; ** while(fread(&inf_info, sizeof(INF_AREA_INFO), 1, inf_file)) ** { ** puts(inf_info.title); ** record_num++; ** ** # we need to seek past the header, and then [record_num] ** # number of recs. ** ** seek_pos = (long)(inf_header_slen+(record_num*inf_area_slen)); ** fseek(inf_file, seek_pos, SEEK_SET); ** } ** ** fclose(inf_file); ** return 1; ** } */ /* Bit-masks for INF_AREA_INFO.AREA_FLAGS field */ #define INF_SCANNING 0x0001 /* On=User is active for area */ #define INF_ALIAS_NAME 0x0002 /* On=Alias name, Off=Login name */ /* If ON, use INF_HEADER.ALIASNAME when */ /* addressing new mail or replies for the */ /* message area. If OFF, the reader uses */ /* the INF_HEADER.LOGINNAME for this */ /* purpose. */ #define INF_ANY_NAME 0x0004 /* On=Allow any name to be entered */ /* If ON, any name can be entered in the */ /* From: field when addressing new mail */ /* or replies for the message area. If */ /* OFF, the normal rules apply. */ #define INF_ECHO 0x0008 /* On=Network mail, Off=Local mail */ #define INF_NETMAIL 0x0010 /* On=E-mail, Off=Conference mail */ /* Refer to the chart below (the values */ /* for the NETWORK_TYPE field) for info */ /* on how these two flags should be set */ /* for message areas. */ #define INF_POST 0x0020 /* On=User can post, Off=User CANNOT post */ #define INF_NO_PRIVATE 0x0040 /* On=Private messages are NOT allowed */ #define INF_NO_PUBLIC 0x0080 /* On=Public messages are NOT allowed */ #define INF_NO_TAGLINE 0x0100 /* On=Taglines are not allowed */ #define INF_NO_HIGHBIT 0x0200 /* On=ASCII 1-127 only, Off=ASCII 1-255 */ /* If ON, only ASCII values 1 to 127 are */ /* allowed in messages. If OFF, all */ /* values from 1 to 255 are allowed. Due */ /* to the fact that ASCII value 0 is used */ /* in C as a string terminator, the value */ /* 0 should not be allowed in messages at */ /* all. */ #define INF_NOECHO 0x0400 /* On=User can prevent messages from being */ /* sent through the network */ #define INF_HASFILE 0x0800 /* On=User can attach files to messages */ #define INF_PERSONAL 0x1000 /* On=User is downloading only personal */ /* msgs in this message area. The flag */ /* INF_SCANNING also needs to be ON. */ /* (* VERSION 3 AND LATER ONLY *) */ #define INF_TO_ALL 0x2000 /* On=User is downloading messages to "All" */ /* and personal messages only in this */ /* area. The flag INF_SCANNING also */ /* needs to be ON. INF_PERSONAL should */ /* *not* be set, as this flag implies the */ /* downloading of personal messages also. */ /* (* VERSION 3 AND LATER ONLY *) */ /* Values for INF_AREA_INFO.NETWORK_TYPE field */ #define INF_NET_FIDONET 0 /* FidoNet-style E-mail and conferences */ /* Local = INF_ECHO=off, NETMAIL=off */ /* EchoMail = INF_ECHO=on, NETMAIL=off */ /* GroupMail = INF_ECHO=on, NETMAIL=off */ /* NetMail = INF_ECHO=on, NETMAIL=on */ #define INF_NET_INTERNET 1 /* Internet E-mail and Usenet newsgroups */ /* Local = INF_ECHO=off, NETMAIL=off */ /* Newsgroup = INF_ECHO=on, NETMAIL=off */ /* E-mail = INF_ECHO=on, NETMAIL=on */ typedef struct /* INF_AREA_INFO */ { tBYTE areanum[6]; /* Area number this record corresponds to */ tBYTE echotag[21]; /* Area tag name (*.BRD name for Telegard) */ tBYTE title[50]; /* Area description/title */ tWORD area_flags; /* Bit-mapped area options */ tBYTE network_type; /* Network mail type (see above) */ } INF_AREA_INFO; /*---------------------------------------------------------------------------*/ /* ** Name of file: *.MIX ** ** Description: The *.MIX file is a very small file, with one record for ** every message area that was scanned. It contains the ** information to get into the *.FTI file. ** ** File format: MIX_REC { repeated for each message area scanned } ** MIX_REC ** ... */ typedef struct /* MIX_REC */ { tBYTE areanum[6]; /* Area number this record corresponds to */ /* This is the ASCII representation of the */ /* actual area number shown on the host BBS. */ tWORD totmsgs; /* Total number of messages for this area */ tWORD numpers; /* Total number of personal messages in this area */ tLONG msghptr; /* Pointer to first message header in *.FTI file */ } MIX_REC; /*---------------------------------------------------------------------------*/ /* ** Name of file: *.FTI ** ** Description: The *.FTI file contains the information for each message ** in the packet. Each record includes all of the ** information about the message, including the pointer to ** the actual message text in the *.DAT file. ** ** NOTE: Messages in the *.FTI file will ALWAYS be in area ** number order. That is to say, if the MIX_REC ** indicates there are 100 messages for this area, ** all 100 messages will follow in sequential order. ** ** File format: FTI_REC { repeated for as many messages } ** FTI_REC { as obtained from the host BBS } ** ... */ /* Bit-masks for FTI_REC.FLAGS field */ #define FTI_MSGPRIVATE 0x0001 /* Private = For addressee ONLY */ #define FTI_MSGCRASH 0x0002 /* Crash = High priority mail */ #define FTI_MSGREAD 0x0004 /* Read = Message read by addressee */ #define FTI_MSGSENT 0x0008 /* Sent = Message sent */ #define FTI_MSGFILE 0x0010 /* File Attach = Send file(s) */ #define FTI_MSGFWD 0x0020 /* Forward = Message to/from others */ #define FTI_MSGORPHAN 0x0040 /* Orphan = Message destination unknown */ #define FTI_MSGKILL 0x0080 /* Kill/Sent = Delete after sending */ #define FTI_MSGLOCAL 0x0100 /* Local = Message originated here */ #define FTI_MSGHOLD 0x0200 /* Hold = Hold for pickup, don't send */ #define FTI_MSGIMMEDIATE 0x0400 /* Immediate = Send message NOW */ #define FTI_MSGFRQ 0x0800 /* File Request = Request file(s) */ #define FTI_MSGDIRECT 0x1000 /* Direct = Send direct, no routing */ #define FTI_MSGUNUSED1 0x2000 /* */ #define FTI_MSGUNUSED2 0x4000 /* */ #define FTI_MSGURQ 0x8000 /* Update Request = Req updated file(s) */ typedef struct /* FTI_REC */ { tBYTE from[36]; /* Person message is from */ tBYTE to[36]; /* Person message is to */ tBYTE subject[72]; /* Subject/title of message */ tBYTE date[20]; /* Origin date of message */ /* Depending on the host BBS's date storage */ /* format, the EXACT format of this field */ /* will change. Some will take all 19 bytes, */ /* others may take only 10. */ tWORD msgnum; /* Number of THIS message on BBS */ tWORD replyto; /* "This is a reply to #xx" */ /* Not used for every message. When non- */ /* zero, there is a previous message in */ /* the thread. */ tWORD replyat; /* "There is a reply at #xx" */ /* Not used for every message. When non- */ /* zero, there is a reply to this message. */ tLONG msgptr; /* Offset to start of message in *.DAT file */ /* Seek to this exact offset in the *.DAT */ /* file, then read "msglength" bytes from */ /* the file to load the entire message text. */ tLONG msglength; /* Length of message text (in bytes) */ tWORD flags; /* Bit-mapped message status flags */ tWORD orig_zone; /* Origin address of message */ /* These three fields will most likely be 0, */ /* unless the current message belongs to a */ /* NetMail message base. */ tWORD orig_net; tWORD orig_node; } FTI_REC; /*---------------------------------------------------------------------------*/ /* ** Name of file: *.DAT ** ** Description: The *.DAT file is an unstructured file which contains the ** text of every message obtained from the host BBS. ** Valid messages begin with an ASCII space (0x20) character ** (which is NOT to be considered part of the message!) ** followed by zero or more bytes which constitute the ** message text. The pointer to the text for each message is ** stored in FTI_REC.MSGPTR, and the length of the text for ** each message is stored in FTI_REC.MSGLENGTH. ** ** File format: Unstructured */ /*****************************************************************************/ /* >>>>>>>>>>>>>>>>> MISCELLANEOUS DATA FILE STRUCTURES <<<<<<<<<<<<<<<<<< */ /*****************************************************************************/ /* ** Name of file: *.MSG ** ** Description: The Fido *.MSG message (named for the BBS program on which ** it originated) has become a de-facto standard among BBS ** implementations, due to the sheer number of utilities ** available that operate with *.MSG messages. It is as ** close to a universal message format as one can get in ** FidoNet (and FidoNet-style networks), and is the reason ** why it is used here (well, the *.MSG header, anyway). ** ** NOTE: Most of the fields in the FTI_REC structure (shown ** above) correspond to similar fields in MSG_REC. ** This was done deliberately, in order to make ** *.FTI file processing a little more intuitive for ** programmers. Also note that MSG_REC is only used ** by the NET_REC structure, which will soon become ** obsolete (replaced by UPL_REC). ** ** File format: MSG_REC { only included one time! } ** message text { text can be terminated by an ASCII NUL } ** { character (0x00), or by an ASCII CR, } ** { LF, NUL (0x0D 0x0A 0x00) sequence } */ /* Bit-masks for MSG_REC.ATTR field */ #define MSG_NET_PRIVATE 0x0001 /* Private */ #define MSG_NET_CRASH 0x0002 /* Crash mail */ #define MSG_NET_RECEIVED 0x0004 /* Received */ #define MSG_NET_SENT 0x0008 /* Sent */ #define MSG_NET_FATTACH 0x0010 /* File attached */ #define MSG_NET_INTRANSIT 0x0020 /* In-transit */ #define MSG_NET_ORPHAN 0x0040 /* Orphaned */ #define MSG_NET_KILL 0x0080 /* Kill after sending */ #define MSG_NET_LOCAL 0x0100 /* Local message */ #define MSG_NET_HOLD 0x0200 /* Hold for pickup */ #define MSG_NET_RESERVED 0x0400 /* RESERVED */ #define MSG_NET_FREQ 0x0800 /* File request */ #define MSG_NET_RREQ 0x1000 /* Return receipt request */ #define MSG_NET_RECEIPT 0x2000 /* Return receipt message */ #define MSG_NET_AREQ 0x4000 /* Audit request */ #define MSG_NET_FUREQ 0x8000 /* File update request */ typedef struct /* MSG_REC (will soon be obsolete) */ { tBYTE from[36]; /* Person message is from */ tBYTE to[36]; /* Person message is to */ tBYTE subj[72]; /* Subject/title of message */ tBYTE date[20]; /* Creation date/time */ /* This date/time is usually in either of the */ /* Fido-sanctioned formats "DD MMM YY HH:MM:SS" */ /* or "WWW DD MMM YY HH:MM", but due to the */ /* chaotic nature of FidoNet-compatible software, */ /* this CANNOT be relied upon! */ tWORD times; /* Number of times read (fairly obsolete) */ tWORD dest; /* Destination node (of net/node) */ tWORD orig; /* Origin node (of net/node) */ tWORD cost; /* Cost of sending message (usually in US cents) */ tWORD orig_net; /* Origin net (of net/node) */ tWORD destnet; /* Destination net (of net/node) */ tLONG unused1; /* Undefined */ tLONG unused2; /* Some software (Opus and Maximus, for example) */ /* uses these fields to store the sent/received */ /* date/time as bit-packed fields, using the same */ /* format used in MS-DOS directory entries. */ tWORD reply; /* Message # that this message replies to */ tWORD attr; /* Message attributes and behavior flags */ tWORD up; /* Message # that replies to this message */ } MSG_REC; /*---------------------------------------------------------------------------*/ /* ** Name of file: *.XTI ** ** Description: The *.XTI file contains extended information for each ** message in the packet. The number of records in the *.XTI ** file will always equal the number of messages in the ** packet, with each record corresponding to a record in the ** *.FTI file (i.e. record #1 in the *.XTI file corresponds ** to record #1 in the *.FTI file, and so on). ** ** NOTE: This file is currently created ONLY by the Blue ** Wave reader, and is not a part of the official ** Blue Wave packet specification; it is merely ** documented here for third party programmers to use ** if they so desire. How other readers store which ** messages have been read/replied-to/marked is left ** as an option to be implemented by the individual ** reader authors. You may use this method if you so ** desire; however, PLEASE do not name any external ** files not conforming to this specification as ** .XTI, due to the fact that the Blue ** Wave reader will expect the file to be in the ** format described. If it's not in the expected ** format, things will get interesting. :-) ** ** File format: XTI_REC { repeated for as many messages } ** XTI_REC { as obtained from the host BBS } ** ... */ /* Bit-masks for XTI_REC.FLAGS field */ #define XTI_HAS_READ 0x01 /* Message has been read */ #define XTI_HAS_REPLIED 0x02 /* Message has been replied to */ #define XTI_IS_PERSONAL 0x04 /* Message is personal */ #define XTI_IS_TAGGED 0x08 /* Message has been 'tagged' */ #define XTI_HAS_SAVED 0x10 /* Message has been saved */ #define XTI_HAS_PRINTED 0x20 /* Message has been printed */ /* Bit-masks for XTI_REC.MARKS field */ #define XTI_MARK_SAVE 0x01 /* Message marked for saving */ #define XTI_MARK_REPLY 0x02 /* Message marked for replying */ #define XTI_MARK_PRINT 0x04 /* Message marked for printing */ #define XTI_MARK_DELETE 0x08 /* Message marked for deletion */ typedef struct /* XTI_REC */ { tBYTE flags; /* Bit-mapped message flags */ tBYTE marks; /* Bit-mapped message markers */ } XTI_REC; /*****************************************************************************/ /* >>>>>>>>>>>>>>>>>>>> READER DATA FILE STRUCTURES <<<<<<<<<<<<<<<<<<<<<< */ /*****************************************************************************/ /* ** Name of file: *.NET ** ** Description: The *.NET file is created ONLY when there is NetMail to be ** sent. It contains the FULL header of the Fido-style *.MSG ** structure plus the fields defined below (which aren't part ** of the standard *.MSG structure yet required by the door). ** ** NOTE: Readers should only generate a *.NET file if ** INF_HEADER.USES_UPL_FILE is not set *AND* the ** mail packet format is version 2 or earlier. ** Doors should process *.NET files *ONLY* in cases ** where a *.UPL file is not present. ** ** File format: NET_REC { repeated for as many NetMail } ** NET_REC { messages as exist in the packet } ** ... */ typedef struct /* NET_REC */ { MSG_REC msg; /* The Fido-style *.MSG header */ tBYTE fname[13]; /* Filename the message text is in */ tBYTE echotag[21]; /* NetMail area tag (*.BRD name for Telegard) */ tWORD zone; /* Destination zone (of zone:net/node.point) */ tWORD point; /* Destination point (of zone:net/node.point) */ tLONG unix_date; /* Date/time of message */ /* This Unix-style date/time value (number */ /* of seconds since 01/01/70) is converted */ /* to the date/time storage method used by */ /* the host BBS. */ } NET_REC; /*---------------------------------------------------------------------------*/ /* ** Name of file: *.UPI ** ** Description: The *.UPI file contains the information for each message ** in the reply packet, as well as information on the reader ** version and registration numbers. Each record includes ** all of the information about the message. ** ** NOTE: Readers should only generate a *.UPI file if ** INF_HEADER.USES_UPL_FILE is not set *AND* the ** mail packet format is version 2 or earlier. ** Doors should process *.UPI files *ONLY* in cases ** where a *.UPL file is not present. ** ** File format: UPI_HEADER { only included one time! } ** UPI_REC { repeated for as many msg bases } ** UPI_REC { as are available to the user } ** ... */ typedef struct /* UPI_HEADER */ { tBYTE regnum[9]; /* Reader registration number */ tBYTE vernum[13]; /* Reader version number */ /* All bytes should be the actually ASCII */ /* value plus 10. Lame security, yes, but it */ /* does prevent "TYPE *.UPI" from showing the */ /* version number. */ tBYTE future[33]; /* RESERVED FOR FUTURE USE */ #ifdef PAD_SIZES_EVEN tBYTE evenpad; /* If your compiler pads structures out to even */ /* numbered sizes, define PAD_SIZES_EVEN */ /* before including this header. When the */ /* *.UPI file is written, be sure to write */ /* sizeof(UPI_HEADER) - 1 bytes, otherwise */ /* your compiler may insert an extra byte not */ /* explicitly specified here. */ #endif } UPI_HEADER; /* Bit-masks for UPI_REC.FLAGS field */ #define UPI_RES1 0x01 /* RESERVED FOR FUTURE USE */ #define UPI_RES2 0x02 /* RESERVED FOR FUTURE USE */ #define UPI_RES3 0x04 /* RESERVED FOR FUTURE USE */ #define UPI_RES4 0x08 /* RESERVED FOR FUTURE USE */ #define UPI_RES5 0x10 /* RESERVED FOR FUTURE USE */ #define UPI_RES6 0x20 /* RESERVED FOR FUTURE USE */ #define UPI_PRIVATE 0x40 /* Message is PRIVATE */ #define UPI_NO_ECHO 0x80 /* Message is NOT to be echoed */ /* This feature is not yet implemented in */ /* the Blue Wave reader or doors, as none */ /* of the currently supported BBS software */ /* has support for this feature. */ typedef struct /* UPI_REC */ { tBYTE from[36]; /* Person message is from */ tBYTE to[36]; /* Person message is to */ tBYTE subj[72]; /* Subject/title of message */ tLONG unix_date; /* Date/time of message */ /* This Unix-style date/time value (number */ /* of seconds since 01/01/70) is converted */ /* to the date/time storage method used by */ /* the host BBS. */ tBYTE fname[13]; /* Filename the message text is in */ tBYTE echotag[21]; /* Area tag name (*.BRD name for Telegard) */ tBYTE flags; /* Bit-mapped flags */ tBYTE reedit; /* INTERNAL USE ONLY! */ /* This flag is used internally by the Blue */ /* Wave reader. Doors should ignore this */ /* field during reply packet processing. */ } UPI_REC; /*---------------------------------------------------------------------------*/ /* ** Name of file: *.UPL ** ** Description: The *.UPL file contains the information for each message ** in the reply packet, as well as information on the reader ** version and registration numbers. Each record includes ** all of the information about the message. ** ** NOTE: Readers should only generate a *.UPL file if ** INF_HEADER.USES_UPL_FILE is set *AND/OR* the mail ** packet format is version 3 or later. Doors should ** process *.UPL files in all cases where one is ** present. ** ** File format: UPL_HEADER { only included one time! } ** UPL_REC { repeated for as many messages } ** UPL_REC { as are included in the packet } ** ... */ typedef struct /* UPL_HEADER */ { tBYTE regnum[10]; /* Reader registration number (if desired) */ tBYTE vernum[20]; /* Reader version number as a string. */ /* All bytes should be the actually ASCII */ /* value plus 10. Lame security, yes, but it */ /* does prevent "TYPE *.UPL" from showing the */ /* version number. */ /* Examples: "2.10a Beta" */ /* "2.11" */ tBYTE reader_major; /* Major version of the reader (number to the */ /* left of the decimal point) */ tBYTE reader_minor; /* Minor version of the reader (number to the */ /* right of the decimal point) */ tBYTE reader_name[80]; /* String containing name of the reader, such */ /* as "The Blue Wave Offline Mail Reader". */ /* This is provided for door programmers that */ /* wish to display the name of the reader */ /* that created the reply packet. (Filling */ /* it is mandatory but using it is optional.) */ tWORD upl_header_len; /* Size of UPL_HEADER structure */ tWORD upl_rec_len; /* Size of UPL_REC structure */ /* NOTE: Refer to the INF_HEADER section for */ /* more information on using the size */ /* fields. */ tBYTE loginname[44]; /* Name found in INF_HEADER.LOGINNAME. This is */ /* provided for door authors as a security */ /* measure to implement as they wish. */ tBYTE aliasname[44]; /* Name found in INF_HEADER.ALIASNAME */ tBYTE reader_tear[16]; /* String containing abbreviated name of the */ /* reader, such as "Blue Wave", "Q-Blue", */ /* "Wave Rider", etc. This is provided for */ /* doors programmers that wish to add to the */ /* tear line the name of the reader that */ /* created the reply packet. (Filling it is */ /* mandatory but using it is optional.) If */ /* this field is blank, the tear line to be */ /* generated is left to the discretion of the */ /* door author. */ tBYTE compress_type; /* Compression type required for mail packet */ /* The Blue Wave reader uses this internally */ /* to store the compression type required for */ /* this particular mail packet. */ tBYTE flags; /* Reader processing flags */ /* The Blue Wave reader uses this internally */ /* to store flags required for later */ /* processing. */ /* 0x01 = Was a .QWK packet. */ /* 0x02 = Host requires a *.UPI file */ tBYTE not_registered; /* Reader is not registered to user */ /* If this byte is set to a non-zero value, */ /* the Blue Wave doors will assume that the */ /* user's reader was not registered, and will */ /* place "[NR]" at the end of the tear line. */ /* Third-party doors may use this flag for */ /* the same purpose; its use is optional by */ /* mail readers (especially if you don't care */ /* whether or not "[NR]" shows up on the tear */ /* line ). */ tBYTE pad[33]; /* RESERVED FOR FUTURE USE, and to pad struct */ /* out to a 'nice' 256 bytes */ } UPL_HEADER; /* Bit-masks for UPL_REC.MSG_ATTR field */ #define UPL_INACTIVE 0x0001 /* Message is INACTIVE */ /* Doors should NOT attempt to import this */ /* message. */ #define UPL_PRIVATE 0x0002 /* Message is PRIVATE */ #define UPL_NO_ECHO 0x0004 /* Message is NOT to be echoed */ /* This feature is not yet implemented in */ /* the Blue Wave reader or doors, as none */ /* of the currently supported BBS software */ /* has support for this feature. */ #define UPL_HAS_FILE 0x0008 /* Message has file "attached" to it */ /* It is up to the door to check the */ /* validity of this flag. If the file is */ /* contained in the mail packet, great. */ /* If not, the door should probably prompt */ /* the user to begin uploading the file */ /* after importing the messages. (Not yet */ /* implemented in the Blue Wave reader.) */ #define UPL_NETMAIL 0x0010 /* Message is network mail */ /* Indicates NetMail/E-mail message. The */ /* NETWORK_TYPE field (see below) will */ /* indicate which fields should be used */ /* for addressing the message. */ #define UPL_IS_REPLY 0x0020 /* Indicates that the message is a reply to */ /* an existing message, rather than being */ /* a completely new message. */ #define UPL_MRES7 0x0040 /* RESERVED FOR FUTURE USE */ #define UPL_MRES8 0x0080 /* RESERVED FOR FUTURE USE */ /* All of the other 8 bits of this field are */ /* also reserved for future use. This */ /* should provide for plenty of expansion */ /* for future development. */ /* Bit-masks for UPL_REC.NETMAIL_ATTR field */ #define UPL_NRES1 0x0001 /* RESERVED FOR FUTURE USE */ #define UPL_NETCRASH 0x0002 /* Crash = High priority mail */ #define UPL_NRES2 0x0004 /* RESERVED FOR FUTURE USE */ #define UPL_NRES3 0x0008 /* RESERVED FOR FUTURE USE */ #define UPL_NETFILE 0x0010 /* File Attach = Send file(s) listed */ /* in Subject field */ #define UPL_NRES4 0x0020 /* RESERVED FOR FUTURE USE */ #define UPL_NRES5 0x0040 /* RESERVED FOR FUTURE USE */ #define UPL_NETKILL 0x0080 /* Kill/Sent = Delete after sending */ #define UPL_NETLOCAL 0x0100 /* Local = Message originated here */ #define UPL_NETHOLD 0x0200 /* Hold = Hold for pickup, do not send */ #define UPL_NETIMMEDIATE 0x0400 /* Immediate = Send message NOW */ #define UPL_NETFRQ 0x0800 /* File Request = Request file(s) */ /* listed in Subject field */ #define UPL_NETDIRECT 0x1000 /* Direct = Send direct, no routing */ #define UPL_NRES6 0x2000 /* RESERVED FOR FUTURE USE */ #define UPL_NRES7 0x4000 /* RESERVED FOR FUTURE USE */ #define UPL_NETURQ 0x8000 /* Update Request = Request updated */ /* file(s) listed in Subject field */ /* Values for UPL_REC.NETWORK_TYPE field */ #define UPL_NET_FIDONET 0 /* FidoNet-style E-mail and conferences */ /* UPL_NETMAIL=off - Local, Echo, Group */ /* UPL_NETMAIL=on - NetMail */ #define UPL_NET_INTERNET 1 /* Internet E-mail and Usenet newsgroups */ /* UPL_NETMAIL=off - Local, Newsgroup */ /* UPL_NETMAIL=on - E-mail */ typedef struct /* UPL_REC */ { tBYTE from[36]; /* Person message is from */ /* NOTE: Doors should validate this field! */ tBYTE to[36]; /* Person message is to (non-Internet) */ /* For Internet E-mail, the NET_DEST field */ /* should be used to store the destination */ /* name/address, leaving this field blank. */ /* For Usenet newsgroups, this field should be */ /* left blank, as newsgroups don't use a "To:" */ /* field. */ tBYTE subj[72]; /* Subject/Title of message */ tWORD destzone; /* Destination address (FidoNet only) */ /* If the message is not a FidoNet NetMail */ /* message, this field (and the subsequent */ /* three fields as well) should be set to */ /* zero. */ tWORD destnet; tWORD destnode; tWORD destpoint; tWORD msg_attr; /* Bit-mapped message attributes */ tWORD netmail_attr; /* Bit-mapped NetMail attributes (FidoNet only) */ /* If the message is not a FidoNet NetMail */ /* message, this field should not be used. */ tLONG unix_date; /* Date/time of message */ /* This Unix-style date/time value (number */ /* of seconds since 01/01/70) is converted to */ /* the date/time storage method used by the */ /* host BBS. */ tDWORD replyto; /* This unsigned long word stores the message # */ /* that this message is a reply to. This */ /* should be the same as FTI.MSGNUM. Note, */ /* however, that FTI.MSGNUM is a word. C */ /* programmers especially will need to */ /* properly typecast the value (i.e. */ /* upl.replyto=(tDWORD)fti.msgnum). As */ /* messaging/BBS systems become more complex, */ /* FTI.MSGNUM may become obsolete, and a */ /* tDWORD variable may be used in its place. */ tBYTE filename[13]; /* Filename the message text is in */ /* If this file does not exist in the upload */ /* packet then doors should consider this an */ /* invalid record. */ tBYTE echotag[21]; /* Area tag the message goes in */ /* This must correspond exactly to the */ /* INF_AREA_INFO.ECHOTAG field for the message */ /* area this message belongs to. Simple area */ /* number matching has proven not to work */ /* simply because sysops are finicky people, */ /* and seem to constantly renumber/change the */ /* message area numbers on the host BBS. */ /* Using an echotag helps to alleviate this */ /* problem. C_ECHO will be C_ECHO on the BBS, */ /* whether it is msg area 17 on the host BBS */ /* or whether it is area 207. Doors should do */ /* a case-INSENSITIVE compare on this field to */ /* find where the message belongs. */ tWORD area_flags; /* The Blue Wave Offline Mail Reader uses this */ /* word internally to store the same value as */ /* in INF_AREA_INFO.AREA_FLAGS. The purpose */ /* of this word is to hold the original */ /* information about the message area so that */ /* later message editing processes can be */ /* controlled properly. For example, if a */ /* user later wanted to edit this message, the */ /* reader would know instantly whether this is */ /* a NETMAIL area, whether PVT messages are */ /* allowed, etc. This allows re-editing of */ /* the message, even when there is not a */ /* corresponding *.INF file laying around, or */ /* the area is not listed in the *.INF file */ /* you currently have to work with. DOOR */ /* AUTHORS SHOULD IGNORE THIS FIELD WHEN */ /* IMPORTING MESSAGES! */ tBYTE f_attach[13]; /* If the UPL_HAS_FILE flag is set, this field */ /* will contain the file name that is attached */ /* to the message. */ tBYTE user_area[6]; /* User-defined storage. Doors should ignore */ /* this field, and reader authors should feel */ /* free to utilize this field for their own */ /* internal use, if necessary. */ tBYTE network_type; /* Indicates the network type. This field must */ /* hold the same value as the NETWORK_TYPE */ /* field in INF_AREA_INFO, allowing doors and */ /* readers to properly handle the message. */ /* (Values duplicated as UPL_NET_xxx, above.) */ /* For FidoNet NetMail and Internet E-mail, it */ /* also indicates which fields should be used */ /* for addressing and status information (as */ /* indicated in comments above and below). */ tBYTE net_dest[100]; /* Network destination address (non-FidoNet) */ /* Internet E-mail messages should use this */ /* field to store the destination address. */ } UPL_REC; /*---------------------------------------------------------------------------*/ /* ** Name of file: *.REQ ** ** Description: The *.REQ file is simply a list of filenames the user ** wants to request from the host BBS. Wildcard characters ** ("*" and "?" under MS-DOS) are allowed, but are not ** guaranteed to produce accurate results on all door ** implementations. ** ** NOTE: Current Blue Wave doors do not accept wildcard ** characters in filenames, and will consider any ** filenames which contain them as being invalid. ** Additionally, if there are more than 10 entries in ** the *.REQ file, current Blue Wave doors will read ** the first 10 and discard the rest. These are ** limitations of the Blue Wave doors, not of the ** Blue Wave format itself. ** ** File format: REQ_REC { repeated for as many files as } ** REQ_REC { requested from the host BBS } ** ... */ typedef struct /* REQ_REC */ { tBYTE filename[13]; /* Name of file to request */ } REQ_REC; /*---------------------------------------------------------------------------*/ /* ** Name of file: *.PDQ ** ** Description: The *.PDQ file contains the information used for the ** offline configuration feature of the mail door. After the ** header is a series of records which indicate the message ** areas to enable for scanning the next time a mail packet ** is requested. ** ** NOTE: Readers should generate a *.PDQ file *ONLY* if ** the mail packet format is version 2 or earlier; ** otherwise, a *.OLC file should be generated. ** Doors should process *.PDQ files *ONLY* in cases ** where a *.OLC file is not present. ** ** If the AREA_CHANGES flag in PDQ_HEADER.FLAGS is ** set, the door should process the offline ** configuration as well as changes to the list of ** areas the user wants to download. In the Blue ** Wave door, this is done by first turning OFF all ** message areas that were active, then turning ON ** the ones specified in the *.PDQ file. This seems ** to be the simplest, most straight-forward method ** of accomplishing this task, though other, more ** complex schemes could easily have been devised. ** ** File format: PDQ_HEADER { only included one time! ** PDQ_REC { repeated for as many message areas } ** PDQ_REC { as the user wishes to enable } ** ... */ /* Bit-masks for PDQ_HEADER.FLAGS field */ #define PDQ_HOTKEYS 0x0001 /* Toggle "hotkeys" in prompts */ #define PDQ_XPERT 0x0002 /* Toggle expert mode (menu displays) */ #define PDQ_AREA_CHANGES 0x0004 /* Change active message areas */ #define PDQ_GRAPHICS 0x0008 /* Toggle IBM 8-bit ASCII characters */ #define PDQ_NOT_MY_MAIL 0x0010 /* Toggle bundling mail from user */ typedef struct /* PDQ_HEADER */ { tBYTE keywords[10][21]; /* User's entire set of door keywords */ tBYTE filters[10][21]; /* User's entire set of door filters */ tBYTE macros[3][78]; /* User's door bundling command macros */ tBYTE password[21]; /* Password */ tBYTE passtype; /* Password type */ /* 0=none 1=door 2=reader 3=both */ tWORD flags; /* Bit-mapped flags */ } PDQ_HEADER; typedef struct /* PDQ_REC */ { tBYTE echotag[21]; /* Echo tag of message area to activate */ /* With Telegard systems, this should */ /* be the name of the *.BRD file, rather */ /* than the actual echo tag. */ } PDQ_REC; /*---------------------------------------------------------------------------*/ /* ** Name of file: *.OLC ** ** Description: The *.OLC file contains the information used for the ** offline configuration feature of the mail door. ** ** NOTE: Readers should generate a *.OLC file *ONLY* if ** the mail packet format is version 3 or later; ** otherwise, a *.PDQ file should be generated. ** Doors should process *.OLC files in all cases ** where one is present. ** ** File format: ASCII text (lines terminated with CRLF) ** ** Comments: Refer to the Blue Wave Developer's Kit documentation ** for details on the exact format of the *.OLC file. */ /*---------------------------------------------------------------------------*/ #endif /* __BLUEWAVE_H */