MBSE BBS Setup - Fidonet nodes.

Last update 31-Dec-2002

MBSE BBS Setup - Fidonet nodes.

Introduction

Unlike many other bbs packages, for each node you need only one record. If you have a relation with a node for one network with costsharing, and other networks without costsharing you need two records for that node. For each node you can setup the aka's, mail, files and session handshake. There are ten screens for each node.

1. Edit general setup

This screen has the general information for the node. The contact info fields are just for private use, these fields are only used in this screen. The Outbox dir is for files to sent to the node, all file you put in there will be sent to the remote if user mbse has read/write access to the file. Only real files are allowed, not symlinks etc.

Sysop name The name of the system operator. The name entered here is used in Areamgr and Filemgr messages etc.

Outbox dir Private extra outbound directory for this node. Any file dropped into this directory will be sent to the node and removed after it is sent.

Pvt. phone Contact info, node private phone.

Pvt. fax Contact info, node private fax.

Pvt. cellphone Contact info, node cellphone (GSM).

Pvt. e-mail Contact info, node e-mail address.

Pvt. remark Contact info, node remark.

Route via A route via Fido address. All mail for this node will be send via this Aka, even mail and files for other networks. This can be usefull if this node has internet access so you can send everything to this node over the internet. Note that to force calling this node via internetr, ISDN or pots can also be done by using nodelist flags override. See section 3. This setting is more usefull to force routing via another node or aka.

Netmail direct Set "direct" flag in netmail to this node.

Netmail crash Send netmail always "crash" to this node.

Netmail hold Put mail on "hold" for this node.

Pack mail Should net- and echomail be packed in arcmail archives.

Send notify Send automatic generated notify messages.

Language The language to use for areamgr msgs.

Deleted If this node must be deleted.

2. Edit nodes aka's

In this screen you can setup 20 aka's for the node.

3. Edit node session

In this screen you can setup the session defaults.

Session passwd This is the mailer session password.

Dial command You can put an override here for the normal dial command. If you leave this empty the command from the modem setup is used.

Phone number 1 An alternative phone number to dial.

Phone number 2 An alternative phone number to dial. Use these above commands if the node has another phone number as mentioned in the nodelist.

Nodelist flags Override for the nodelist flags, the nodelist flags are completly ignored if you enter something here so make sure all flags you need are here. All aka's of this node will use the same flags. This can be usefull to force calling this node via the internet and to force a certain protocol.

Inet hostname The FQDN hostname or IP address of this node. This replaces the original system name from the nodelist and this is then used to make the internet TCP/IP connection. This can be usefull if the FQDN is not present in the nodelist.

Outbound sess. Outbound session method, choices are Direct and Directory. Direct means normal classic mailer connections. Directory means that everything is put in a directory from which the other node can fetch the mail and files using ftp protocol.

Inbound sess. Inbound session method, choices are Direct and Directory. Direct means normal classic mailer connections. Directory means that inbound mail and files are expected in a directory were it is stored by the node using ftp protocol.

No EMSI Disable EMSI handshake.

No YooHoo/2U2 Disable FTSC-0006 handshake.

No Filerequest Disable filerequest from this node.

Don't call Do not call this node.

8.3 names Set this if the node only accepts 8.3 filenames.

No Zmodem Disable Zmodem protocol.

No Zedzap Disable Zedzap protocol.

No Hydra Disable Hydra protocol.

4. Edit node - mail processing

PKT password The password to insert in .pkt files.
Check PKT pwd Check password in received .pkt files. If not, errors or missing passwords are only logged. If set, errors or missing password are refused and the .pkt files are renamed to .bad
UplMgr program The name of the Areamgr program of this node. This could be AreaFix, AreaMgr etc.
UplMgr passwd The password for the Areamgr of this node.
Mail forward Not in use yet.
ARCmail comp. Use ARCmail 0.60 file naming convention for out of zone mail.
ARCmail a..z Allow a..z last character for ARCmail filenames.

5. Edit mail groups

Here you can tag which mail groups are available for this node. Note that all groups are visible here, even for networks this node has no aka's in. Be carefull not to allow a node to connect areas from networks he has no aka in.

6. File setup

Files password The password for .tic files.

Mgr password The password for the Areamgr and Filemgr.

UplMgr program The name of the Filemgr progrom of this node. This could be FileMgr, Allfix, Raid etc.

UplMgr passwd The password of the Filemgr if this node.

UplMgr Add + Add a "+" in the command to connect areas.

Incl. message Send a netmail message for each file to send.

Send TIC file Send .tic file to this node.

Advanced TIC Send advanced or standard .tic files.

Advanced SB Send advanced Seen-By lines, some systems can't handle this!

To line in TIC Send the To line in the ticfile. Some braindead systems will forward this line instead of processing it and then the next system in the line will fail.

File forward Forward TIC files for this node (not yet).

Billing Is Costsharing active for this node.

Bill direct Send the bill direct or on command (billing is not yet available).

Credit The credit this node has in units.

Debet The debet we have with this node (informational).

Add Add (or substract) factor to the bill.

Warn level The debet level when to write a warning mesage.

Stop level The debet level when to stop sending files.

7. File groups

The same story as for mail groups is true for the file groups.

8. Directory session

Setup in this screen is needed if you selected Inbound and or Outbound session as Directory session. The node is then getting and bringing mail using the ftp protocol and no normal mailer connects are being used anymore. This may be a good solution for points, they only need a simple mailreader and a tosser. The mail is transferred by the mbfido program, during the toss or tic command after the normal inbound is processed mbfido will look for nodes inbound directories to process. When mail is added to the outbound, mail for nodes with directory sessions is not stored in the normal Binley Style Outbound but in the session outbound directory.
You need to setup a ftp account for this node and the best thing is to set this up so that the other node is forced in a chroot environment, ie. make it so that the node only sees his own directories and cannot leave that. The ftp account needs to be a member of group bbs because mbfido needs access to the files as well as the node. The nodes account needs also to be a member of group bbsftp for the chroot environment. The node needs umask 002 so that files that he puts there will have group read/write access. During toss mbfido also stores the files with group read/write access so that the node can remove the files when he has fetched all files. Directory locking is supported and is compatible with other mailers that support ftp. Here is a small sample of protftp.conf for use with directory sessions:
# This is /etc/proftpd.conf for use with mbsebbs ftp mail
# sessions and anonymous ftp access.
# It assumes that you have a user/group "nobody" and "ftp" 
# for normal/anonymous operation.
# It also assumes you have a group bbsftp were ftp mail users
# must be a member of.
#
ServerName			"Seaport ProFTPD server"
ServerType			inetd
DefaultServer			on
#
# Port 21 is the standard FTP port.
Port				21
# Umask 002 is to force new dirs and files to be group writable.
Umask				002
#
# To prevent DoS attacks, set the maximum number of child processes
# to 30.
MaxInstances			30
#
# Set the user and group that the server normally runs at.
User				nobody
Group				nogroup
#
SystemLog			/var/log/proftpd
TransferLog			/var/log/xferlog
#
# Anonymous ftp and members of group bbsftp have a chroot environment.
DefaultRoot	~ bbsftp
#
# Normally, we want files to be overwriteable.
<Directory /*>
  AllowOverwrite		on
</Directory>
#
# A basic anonymous FTP server configuration.
# To enable this, remove the user ftp from /etc/ftpusers.
<Anonymous ~ftp>
  RequireValidShell		off
  User				ftp
  Group				ftp
  # We want clients to be able to login with "anonymous" as well as "ftp"
  UserAlias			anonymous ftp
  #
  # Limit the maximum number of anonymous logins
  MaxClients			50
  #
  # We want 'welcome.msg' displayed at login, and '.message' displayed
  # in each newly chdired directory.
  DisplayLogin			welcome.msg
  DisplayFirstChDir		.welcome
  DisplayReadme			README
  #
  # Display .dotfiles and .dirs
  LsDefaultOptions		"-a"
  #
  # Limit WRITE everywhere in the anonymous chroot
  <Limit WRITE>
    DenyAll
  </Limit>
  #
  # An upload directory that allows storing files but not retrieving
  # or creating directories.
  <Directory incoming/*>
     <Limit READ>
       DenyAll
     </Limit>

     <Limit STOR>
       AllowAll
     </Limit>
  </Directory>
  #
</Anonymous>
Here are some examples to create an account, first create the extra group bbsftp:
groupadd bbsftp
Then create accounts like this:
useradd -g bbs -G bbsftp -d /opt/mbse/var/bbsftp/irex -s /bin/bash -c "FTP Mail account" irex
Then give the node a password for the ftp login. Note that this account has a shell, proftpd needs a valid shell to allow access. If the node tries to telnet to your bbs he can't login with this account if you use mblogin, this is because the node is not in the bbs userfile. If you system allows it, the node can access the shell using rlogin or ssh.
Now the items to setup for the directory sessions:

Outbound settings

Files path The path were to store the outbound mail and files.

Check for lock If we need to check for a lockfile before adding files.

Wait clear lock Wait for the lock to clear if present or not. If set to yes and there is a lock created by the node then mbfido will wait for maximum 10 minutes for the lock to disappear. If set to no, mbfido skips this node and will add mail and files at a later time.
Check lockfile The full filename and path of the lockfile to check for.

Create lock If mbfido should create a lock during the time it will add mail and files.

Create lockfile The full filename and path of the lockfile to create.

Inbound settings

Files path The path from were to get the inbound mail and files.

Check for lock If we need to check for a lockfile before getting files.

Wait clear lock Wait for the lock to clear if present or not. If set to yes and there is a lock created by the node then mbfido will wait for maximum 10 minutes for the lock to disappear. If set to no, mbfido skips this node and will scan this directory at a later time.
Check lockfile The full filename and path of the lockfile to check for.

Create lock If mbfido should create a lock during the time it will get mail and files.

Create lockfile The full filename and path of the lockfile to create.

9. Security

This will set the security bits for the node. These bits can be used to give access or deny access to certain echomail areas or tic file areas. Default bit 1 is set for each node.

10. Statistics

In this statistics screen you can see the mail and files flow with this node. Values are stored for the current week, the previous week, the current month and previous month and the overall total since you defined this node. There are actual 12 months of statistics stored in the nodes record, only 2 are visible.

Back to index Back to main index

Sysop name	The name of the system operator. The name entered here is used in Areamgr and Filemgr messages etc.
Outbox dir	Private extra outbound directory for this node. Any file dropped into this directory will be sent to the node and removed after it is sent.
Pvt. phone	Contact info, node private phone.
Pvt. fax	Contact info, node private fax.
Pvt. cellphone	Contact info, node cellphone (GSM).
Pvt. e-mail	Contact info, node e-mail address.
Pvt. remark	Contact info, node remark.
Route via	A route via Fido address. All mail for this node will be send via this Aka, even mail and files for other networks. This can be usefull if this node has internet access so you can send everything to this node over the internet. Note that to force calling this node via internetr, ISDN or pots can also be done by using nodelist flags override. See section 3. This setting is more usefull to force routing via another node or aka.
Netmail direct	Set "direct" flag in netmail to this node.
Netmail crash	Send netmail always "crash" to this node.
Netmail hold	Put mail on "hold" for this node.
Pack mail	Should net- and echomail be packed in arcmail archives.
Send notify	Send automatic generated notify messages.
Language	The language to use for areamgr msgs.
Deleted	If this node must be deleted.

Session passwd	This is the mailer session password.
Dial command	You can put an override here for the normal dial command. If you leave this empty the command from the modem setup is used.
Phone number 1	An alternative phone number to dial.
Phone number 2	An alternative phone number to dial. Use these above commands if the node has another phone number as mentioned in the nodelist.
Nodelist flags	Override for the nodelist flags, the nodelist flags are completly ignored if you enter something here so make sure all flags you need are here. All aka's of this node will use the same flags. This can be usefull to force calling this node via the internet and to force a certain protocol.
Inet hostname	The FQDN hostname or IP address of this node. This replaces the original system name from the nodelist and this is then used to make the internet TCP/IP connection. This can be usefull if the FQDN is not present in the nodelist.
Outbound sess.	Outbound session method, choices are Direct and Directory. Direct means normal classic mailer connections. Directory means that everything is put in a directory from which the other node can fetch the mail and files using ftp protocol.
Inbound sess.	Inbound session method, choices are Direct and Directory. Direct means normal classic mailer connections. Directory means that inbound mail and files are expected in a directory were it is stored by the node using ftp protocol.
No EMSI	Disable EMSI handshake.
No YooHoo/2U2	Disable FTSC-0006 handshake.
No Filerequest	Disable filerequest from this node.
Don't call	Do not call this node.
8.3 names	Set this if the node only accepts 8.3 filenames.
No Zmodem	Disable Zmodem protocol.
No Zedzap	Disable Zedzap protocol.
No Hydra	Disable Hydra protocol.

PKT password	The password to insert in .pkt files.
Check PKT pwd	Check password in received .pkt files. If not, errors or missing passwords are only logged. If set, errors or missing password are refused and the .pkt files are renamed to .bad
UplMgr program	The name of the Areamgr program of this node. This could be AreaFix, AreaMgr etc.
UplMgr passwd	The password for the Areamgr of this node.
Mail forward	Not in use yet.
ARCmail comp.	Use ARCmail 0.60 file naming convention for out of zone mail.
ARCmail a..z	Allow a..z last character for ARCmail filenames.

Files password	The password for .tic files.
Mgr password	The password for the Areamgr and Filemgr.
UplMgr program	The name of the Filemgr progrom of this node. This could be FileMgr, Allfix, Raid etc.
UplMgr passwd	The password of the Filemgr if this node.
UplMgr Add +	Add a "+" in the command to connect areas.
Incl. message	Send a netmail message for each file to send.
Send TIC file	Send .tic file to this node.
Advanced TIC	Send advanced or standard .tic files.
Advanced SB	Send advanced Seen-By lines, some systems can't handle this!
To line in TIC	Send the To line in the ticfile. Some braindead systems will forward this line instead of processing it and then the next system in the line will fail.
File forward	Forward TIC files for this node (not yet).
Billing	Is Costsharing active for this node.
Bill direct	Send the bill direct or on command (billing is not yet available).
Credit	The credit this node has in units.
Debet	The debet we have with this node (informational).
Add	Add (or substract) factor to the bill.
Warn level	The debet level when to write a warning mesage.
Stop level	The debet level when to stop sending files.

Outbound settings
Files path	The path were to store the outbound mail and files.
Check for lock	If we need to check for a lockfile before adding files.
Wait clear lock	Wait for the lock to clear if present or not. If set to yes and there is a lock created by the node then mbfido will wait for maximum 10 minutes for the lock to disappear. If set to no, mbfido skips this node and will add mail and files at a later time.
Check lockfile	The full filename and path of the lockfile to check for.
Create lock	If mbfido should create a lock during the time it will add mail and files.
Create lockfile	The full filename and path of the lockfile to create.
Inbound settings
Files path	The path from were to get the inbound mail and files.
Check for lock	If we need to check for a lockfile before getting files.
Wait clear lock	Wait for the lock to clear if present or not. If set to yes and there is a lock created by the node then mbfido will wait for maximum 10 minutes for the lock to disappear. If set to no, mbfido skips this node and will scan this directory at a later time.
Check lockfile	The full filename and path of the lockfile to check for.
Create lock	If mbfido should create a lock during the time it will get mail and files.
Create lockfile	The full filename and path of the lockfile to create.