This repository has been archived on 2024-04-08. You can view files and clone it, but cannot push or open issues or pull requests.
deb-mbse/html/setup/taskmgr.html
2003-09-11 19:36:20 +00:00

73 lines
2.9 KiB
HTML

<HTML>
<!-- $Id$ -->
<HEAD>
<META http-equiv="Content-Type" content="text/html; charset=ISO 8859-1">
<META http-equiv="Content-Style-Type" content="text/css">
<META name="author" lang="en" content="Michiel Broek">
<META name="copyright" lang="en" content="Copyright Michiel Broek">
<META name="description" lang="en" content="MBSE BBS Manual">
<META name="keywords" lang="en" content="MBSE BBS, MBSE, BBS, manual, fido, fidonet, gateway, tosser, mail, tic, mailer">
<TITLE>MBSE BBS Setup - Task Manager.</TITLE>
<LINK rel=stylesheet HREF="../manual.css">
</HEAD>
<BODY>
<BLOCKQUOTE>
<h5>Last update 09-Sep-2002</h5>
<P>&nbsp;<P>
<H1>MBSE BBS Setup - Task Manager.</H1>
<P>
<H3>Introduction</H3>
<P>
The task manager is the daemon which controls the MBSE BBS. It watches semafore's and spawns
programs in the background. It also watches the outbound to see if there are
nodes to call.
The behaviour is setup in this screen.
<P>
<H3>Edit Task Manager</H3>
<P>
<pre>
<b>Mailout </b>Action for semafore mailout.
<b>Mailin </b>Action for semafore mailin.
<b>Newnews </b>Action for semafore newnews.
<b>Index 1 </b>Nodelist compiler 1 for semafore mbindex.
<b>Index 2 </b>Nodelist compiler 2 for semafore mbindex.
<b>Index 3 </b>Nodelist compiler 3 for semafore mbindex.
<b>Msglink </b>Action for semafore msglink.
<b>Reqindex </b>Action for semafore reqindex.
<b>ISP conn </b>Not in use yet!
<b>ISP disc </b>Not in use yet!
<b>Ping #1 </b>IP address of node to ping to check the internet.
<b>Ping #2 </b>IP address of second node to ping to check the internet.
<b>Max TCP </b>Maximum simultaneous outgoing calls over the internet.
<b>Max Load </b>Max system load until processing is suspended.
<b>ZMH start </b>Start of Zone Mail Hour in UTC time.
<b>ZMH end </b>End of Zone Mail Hour in UTC time.
</pre>
<P>
Default are the original MBSE commands filled in, but you could also call
shell scripts.
<P>
The two IP addresses to ping need to be IP addresses, not hostnames. This is the
most reliable way to check the connection. You should enter the IP addresses of
the nameservers of your own ISP here. One of these will always be up, so if one
of these can be reached, the internet connection is assumed to be alive. The
status of the internet connection is used to decide if it is allowed (and
possible) to call TCP/IP nodes. Calling these nodes is not depending on ZMH
unless the destination is not a CM node.<br>
The <b>max load</b> setting decides at which system load point processing of background
tasks will be suspended. The default value should be allright for machines slower then 200
MHz or with low ram. On faster machines you may set this value higher.
<P>
<IMG SRC="../images/taskmgr.png" Border="0">
<P>
<A HREF="./"><IMG SRC="../images/larrow.png" ALT="Back" Border="0"> Back to index</A>&nbsp;
<A HREF="../"><IMG SRC="../images/b_arrow.png" ALT="Home" Border="0"> Back to main index</A>
</BLOCKQUOTE>
</BODY>
</HTML>