342 lines
15 KiB
INI
342 lines
15 KiB
INI
; DOOR.CFG - Sample OpenDoors door configuration file
|
|
;
|
|
; This configuration file can be used by the sysop to customize an OpenDoors
|
|
; door for use on their own system. The information in this file is NOT usually
|
|
; needed, and the file can be left as is, or even erased, without effecting the
|
|
; door's performance. OpenDoors is designed to run on almost any BBS system
|
|
; automatically, without requiring anything but to the door's .EXE file.
|
|
; However, there are many cases where the sysop may wish to customize a door's
|
|
; operation using this configuration file. The configuration file system is
|
|
; provided to allow the customization of options such as paging hours, maximum
|
|
; time permitted within the door, etc., and to allow OpenDoors doors to be run
|
|
; under even the most non-typical BBS setups.
|
|
;
|
|
; Any text following a semi-colon (;), and blank lines, are ignored.
|
|
;
|
|
;------------------------------------------------------------------------------
|
|
;
|
|
; BBS system directory. Indicates where the door information file (drop file)
|
|
; can be found. Remove the semi-colon (;) to activate this option.
|
|
;
|
|
;BBSDir C:\BBS
|
|
;
|
|
;------------------------------------------------------------------------------
|
|
;
|
|
; The door's working directory. This is where the door's system files are
|
|
; located. Remove the semi-colon (;) to activate this option.
|
|
;
|
|
;DoorDir C:\BBS\MYDOOR
|
|
;
|
|
;------------------------------------------------------------------------------
|
|
;
|
|
; Local mode override. Forces door to always operate in local test mode.
|
|
; Remove the semi-colon (;) to activate this option. When this mode is
|
|
; activated, no door information file is required and default settings are
|
|
; used for the user's name, location, etc.
|
|
;
|
|
;LocalMode
|
|
;
|
|
;------------------------------------------------------------------------------
|
|
;
|
|
; Door personality setting. This setting selects one of a number of sysop
|
|
; interface personalities. Each personality setting emulates the status line
|
|
; format and sysop function keys of a particular BBS package. Valid
|
|
; personality settings are:
|
|
;
|
|
; Standard (OpenDoors style, simplified from RA)
|
|
; PCBoard
|
|
; RemoteAccess
|
|
; Wildcat
|
|
;
|
|
Personality Standard
|
|
;
|
|
;------------------------------------------------------------------------------
|
|
;
|
|
; Log File options. "LogFileName" specifies filename (path optional) where the
|
|
; door should record log information. To disable the log file altogether,
|
|
; remove the semi-colon (;) from the "DisableLogging" line.
|
|
;
|
|
;LogFileName DOOR.LOG
|
|
;DisableLogging
|
|
;
|
|
;------------------------------------------------------------------------------
|
|
;
|
|
; BBS node number that door is running on. Only used if OpenDoors is unable
|
|
; to determine the node number by some other means.
|
|
;
|
|
Node 1
|
|
;
|
|
;------------------------------------------------------------------------------
|
|
;
|
|
; Sysop paging hours. Sysop paging will be permitted beginning at the start
|
|
; time, up until, but not including, the end time. Times should be in 24-hour
|
|
; format. To disable paging on a particular day, set the paging start and end
|
|
; times to the same time. To make paging always available, set the start time
|
|
; to 0:00 and the end time to 23:59.
|
|
;
|
|
; Start Time End Time
|
|
SundayPagingHours 9:00 22:00
|
|
MondayPagingHours 8:30 22:00
|
|
TuesdayPagingHours 8:30 22:00
|
|
WednesdayPagingHours 8:30 22:00
|
|
ThursdayPagingHours 8:30 22:00
|
|
FridayPagingHours 8:30 22:00
|
|
SaturdayPagingHours 9:00 22:00
|
|
;
|
|
;------------------------------------------------------------------------------
|
|
;
|
|
; Duration of sysop page. Value indicates the number of beeps that compose the
|
|
; sysop page alarm, with one beep sounded per second.
|
|
;
|
|
PageDuration 10
|
|
;
|
|
;------------------------------------------------------------------------------
|
|
;
|
|
; Maximum length of time a user is permitted to access the door. If the user's
|
|
; total remaining time on the BBS is less than this value, the user will only
|
|
; be permitted to access the door for this shorter length of time. This option
|
|
; may be disabled by placing a semi-colon (;) at the beginning of the line.
|
|
; When this option is disabled, the user will be permitted to use the full
|
|
; of their remaining time on the BBS within the door.
|
|
;
|
|
;MaximumDoorTime 15
|
|
;
|
|
;------------------------------------------------------------------------------
|
|
;
|
|
; Inactivity timeout. Specifies the maximum number of seconds that may elapse
|
|
; without the user pressing any key, before the user will be automatically
|
|
; disconnected. A value of 0 disables inactivity timeouts.
|
|
;
|
|
InactivityTimeout 200
|
|
;
|
|
;------------------------------------------------------------------------------
|
|
;
|
|
; Name of the sysop. OpenDoors can usually determine the sysop's name from the
|
|
; information passed to the door by the BBS. However, some BBS software does
|
|
; not supply this information to doors. In such cases, if the sysop's name is
|
|
; required by the door, it may be supplied here. Remove the semi-colon (;) to
|
|
; activate this option.
|
|
;
|
|
;SysopName The Sysop
|
|
;
|
|
;------------------------------------------------------------------------------
|
|
;
|
|
; Name of the BBS. OpenDoors can usually determine the name of the BBS from
|
|
; the information passed to the door by the BBS. However, some BBS software
|
|
; does not supply this information to door programs. In such cases, if the
|
|
; name of the BBS is needed by the door, it may be supplied here. Remove the
|
|
; semi-colon (;) to activate this option.
|
|
;
|
|
;SystemName Unnamed BBS
|
|
;
|
|
;------------------------------------------------------------------------------
|
|
;
|
|
; Door colour options. These options specify the various text colours that
|
|
; will be used by the door if ANSI or AVATAR graphics modes are available.
|
|
; Colours are specified in the format:
|
|
;
|
|
; {Bright} {Flashing} [Foreground Colour] on [Background Colour]
|
|
;
|
|
; Where foreground and background colours are one of:
|
|
;
|
|
; Black
|
|
; Blue
|
|
; Green
|
|
; Cyan
|
|
; Red
|
|
; Magenta
|
|
; Yellow / Brown
|
|
; White / Grey
|
|
;
|
|
; Note that some of these options (such as those that pertain to files
|
|
; listings) are not used for all doors.
|
|
;
|
|
ChatUserColour Bright white on black
|
|
ChatSysopColour Bright red on black
|
|
FileListTitleColour Bright yellow on black
|
|
FileListNameColour Bright yellow on black
|
|
FileListSizeColour Bright magenta on black
|
|
FileListDescriptionColour Cyan on black
|
|
FileListOfflineColour Bright red on black
|
|
PagePromptColour Bright white on black
|
|
PopupMenuTitleColour Bright white on grey
|
|
PopupMenuBorderColour Black on grey
|
|
PopupMenuTextColour Black on grey
|
|
PopupMenuKeyColour Red on grey
|
|
PopupMenuHighlightColour Grey on black
|
|
PopupMenuHighKeyColour Red on black
|
|
;
|
|
;------------------------------------------------------------------------------
|
|
;
|
|
; Memory swapping options. These options are generally not needed, but can be
|
|
; used to customize OpenDoor's swapping behaviour. "SwappingDir" can be used
|
|
; to specify which directory or directories should be used for swapping.
|
|
; Multiple directory paths can be seperated using a semi-colon.
|
|
; "SwappingNoEMS" can be used to prevent any swapping from being done to EMS
|
|
; memory, and "SwappingDisable" can be used to disable memory swapping
|
|
; altogether. Remove the semi-colon (;) to activate any of these options.
|
|
;
|
|
;SwappingDir C:\
|
|
;SwappingNoEMS
|
|
;SwappingDisable
|
|
;
|
|
;------------------------------------------------------------------------------
|
|
;
|
|
; Serial port options. These options are generally not needed, as these
|
|
; settings can usually be determined from the BBS door information file.
|
|
; "LockedBPS" specifies the the BPS rate at which the door should communicate
|
|
; with the modem. "SerialPort" specifies the port port number that the modem
|
|
; is connected to. Unless you have reassigned the port numbers through your
|
|
; FOSSIL drive, port 0 corresponds to COM1, port 1 corresponds to COM2, and
|
|
; so on. Remove the semi-colon (;) to activate either of these options.
|
|
;
|
|
;LockedBPS 38400
|
|
;SerialPort 0
|
|
;
|
|
;
|
|
; Under DOS, a FOSSIL driver is normally used for serial I/O if one is
|
|
; available. If a FOSSIL driver has not been loaded, the door communicates
|
|
; directly with the modem. Removing the semi-colon (;) from the "NoFossil"
|
|
; option causes the door to always communicate directly with the modem,
|
|
; bypassing any FOSSIL driver.
|
|
;
|
|
;NoFossil
|
|
;
|
|
;------------------------------------------------------------------------------
|
|
;
|
|
; The following options only apply for the MS-DOS version of this program,
|
|
; and only if a FOSSIL driver is NOT being used for serial communications.
|
|
; If a FOSSIL driver IS being used, these options are normally set on the
|
|
; FOSSIL driver command line. Under Windows, these options are set in the
|
|
; control panel.
|
|
;
|
|
; Hexidecimal address of the serial port. This address can usually be
|
|
; determined automatically for ports COM1, COM2, COM3, and COM4, and is
|
|
; normally only required for ports COM5 and higher. Remove the semi-colon
|
|
; (;) to activate this option.
|
|
;
|
|
;PortAddress 2F8
|
|
;
|
|
;
|
|
; Interrupt request line that the serial port is using. May be any IRQ line
|
|
; from 1 to 15. By default, IRQ line 4 is used for ports COM1: and COM3:,
|
|
; while IRQ line 3 is used for all other ports. Remove the semi-colon (;)
|
|
; to activate this option.
|
|
;
|
|
;PortIRQ 4
|
|
;
|
|
;
|
|
; Serial I/O buffer sizes. "ReceiveBuffer" specifies the number of bytes in
|
|
; the serial I/O receive buffer. You may want to increase this buffer size
|
|
; if you find that characters being sent from the user's modem are being lost.
|
|
; "TransmitBuffer" specifies the number of bytes in the serial I/O transmit
|
|
; buffer. You may want to increase this buffer size for improved performance
|
|
; in some multitasking environments. A transmit buffer size smaller than 3072
|
|
; bytes is not recommended.
|
|
;
|
|
ReceiveBuffer 256
|
|
TransmitBuffer 3072
|
|
;
|
|
;
|
|
; UART FIFO buffers. Normally, OpenDoors will use 16550A UART FIFO buffers
|
|
; if they are available. You can prevent OpenDoors from using the FIFO
|
|
; buffers, even if they are available, by removing the semi-colon before
|
|
; the "NoFIFO" keyword. The "FIFOTriggerSize" specifies how many characters
|
|
; may be placed in the FIFO buffers before an serial I/O interrupt is
|
|
; envoked. Valid values are 1, 4, 8 and 14 bytes. The default value is 4
|
|
; bytes.
|
|
;
|
|
;NoFIFO
|
|
FIFOTriggerSize 4
|
|
;
|
|
;------------------------------------------------------------------------------
|
|
;
|
|
; The following options control if and how the Windows version of this program
|
|
; disables DTR response by the modem prior to exiting. Normally, the sequence
|
|
; of modem commands specified by DisableDTR is sent before exiting, to prevent
|
|
; the modem from hanging up. To disable this feature, remove the semi-colon
|
|
; (;) at the beginning of the NoDTRDisable line.
|
|
;
|
|
; DisableDTR specifies a series of commands to be sent to the modem, and
|
|
; responses to be received by the modem. Each command and response is
|
|
; separated by a space. A tilde (~) character denotes a one second pause, and
|
|
; a pipe (|) denotes a CR.
|
|
;
|
|
;NoDTRDisable
|
|
DisableDTR ~+++ OK AT&D0| OK ATO|
|
|
;
|
|
;------------------------------------------------------------------------------
|
|
;
|
|
; Custom door information file support. OpenDoors automatically recognizes
|
|
; most door information file (drop file) formats, including DORINFO?.DEF,
|
|
; EXITINFO.BBS, DOOR.SYS, SFDOORS.DAT, CALLINFO.BBS and CHAIN.TXT. However,
|
|
; to permit OpenDoors doors to operate on BBS systems that produce a different
|
|
; format file, you may define a custom door information file format. A custom
|
|
; door information file format is defined using the "CustomFileName" command,
|
|
; followed by one or more lines beginning with the "CustomFileLine" command.
|
|
;
|
|
; The "CustomFileName" option specifies the filename used to distinguish this
|
|
; file format from other file formats. This filename should not include a
|
|
; path. To specify the path where the door information file is located, use
|
|
; the BBSDir setting, near the beginning of this file. If the filename of the
|
|
; custom format is the same as that of one of the built-in formats, the custom
|
|
; format will override the built-in format.
|
|
;
|
|
; The actual format of the custom file is specified using a number of lines
|
|
; that begin with the keyword "CustomFileLine". Each of these lines will
|
|
; correspond to a single line in the door information file, with the option
|
|
; following the "CustomFileLine" keyword specifying the information that can
|
|
; be found on that line. This can be one of the following keywords:
|
|
;
|
|
; Ignore - Causes the next line in the door information
|
|
; file to be ignored. Use on lines for which none
|
|
; of the options below apply.
|
|
; ComPort - COM? port the modem is connected to
|
|
; (0 indicates local mode)
|
|
; FossilPort - Fossil port number the modem is connected to
|
|
; ModemBPS - BPS rate at which to communicate with modem
|
|
; (0 or non-numerical value indicates local mode)
|
|
; LocalMode - 1, T or Y if door is operating in local mode
|
|
; UserName - Full name of the user
|
|
; UserFirstName - First name(s) of the user
|
|
; UserLastName - Last name of the user
|
|
; Alias - The user's psuedonym / handle
|
|
; HoursLeft - Hours user has left online
|
|
; MinutesLeft - Minutes user has left online, or time left online
|
|
; in format hh:mm
|
|
; SecondsLeft - Seconds user has left online, or time left online
|
|
; in format hh:mm:ss or format mm:ss
|
|
; (If more than one of the above time options are
|
|
; used, the user time left is taken to be the total
|
|
; of all of these values.)
|
|
; ANSI - 1, T, Y or G for ANSI graphics mode
|
|
; AVATAR - 1, T or Y for AVATAR graphics mode
|
|
; RIP - 1, T or Y for RIP graphics mode
|
|
; PagePausing - 1, T or Y if user wishes a pause at end of screen
|
|
; ScreenLength - Number of lines on user's screen
|
|
; ScreenClearing - 1, T or Y if screen clearing mode is on
|
|
; Security - The user's security level / access level
|
|
; City - City the user is calling from
|
|
; Node - Node number user is connected to
|
|
; SysopName - Full name of the sysop
|
|
; SysopFirstName - The sysop's first name(s)
|
|
; SysopLastName - The sysop's last name
|
|
; SystemName - Name of the BBS
|
|
;
|
|
;
|
|
CustomFileName EXAMPLE.DEF ; Same format as DORINFO?.DEF
|
|
CustomFileLine SystemName
|
|
CustomFileLine SysopFirstName
|
|
CustomFileLine SysopLastName
|
|
CustomFileLine ComPort
|
|
CustomFileLine ModemBPS
|
|
CustomFileLine Ignore
|
|
CustomFileLine UserFirstName
|
|
CustomFileLine UserLastName
|
|
CustomFileLine City
|
|
CustomFileLine ANSI
|
|
CustomFileLine Security
|
|
CustomFileLine MinutesLeft
|
|
;
|
|
;------------------------------------------------------------------------------
|